Lw8552w2 Parts

This small strainer sits inside the washer's water inlet valve and screens out sand, rust, and sediment from the supply lines. Replacing a clogged or missing screen restores normal fill flow and helps protect the valve.

• Filters debris from incoming hot and cold water before it reaches the valve and tub
• Helps maintain consistent water flow during the fill cycle
• A clogged or damaged screen can cause slow fill, very long fill times, or no fill
• Common causes for replacement include mineral buildup or rust/sediment from supply lines

• Unplug the washer and turn off both water supplies
• Place a towel or shallow pan, relieve hose pressure, and disconnect the fill hoses from the inlet valve
• Carefully pull out the old screen (needle-nose pliers work well); press the new screen fully and evenly into the valve port
• Reconnect hoses, restore water and power, and check for leaks
• Tip: Many washers have separate hot and cold inlets—inspect both screens and replace as needed

This spline insert is the small splined bushing that fits onto a drive shaft to transfer rotational force between the motor/shaft and the driven part. It restores a secure, slip-free connection for proper appliance operation. What it does:

• Provides a keyed, splined interface between the drive shaft and the driven component to transfer torque
• Prevents slip or loss of drive that can cause the drum/agitator to stop turning
• Worn or damaged splines can cause grinding, slipping, or intermittent movement
• Restoring the insert can eliminate looseness and reduce related noise

• Disconnect power before servicing; follow all safety precautions
• Access and removal often require removing the relevant panel or assembly (drum/agitator area)
• Inspect mating shaft and surrounding components for wear and replace as needed
• Install with correct orientation and fully seat on the splined shaft; test operation after reassembly

This power cord assembly provides the main AC connection for your appliance so it can receive reliable power. Replacing a damaged cord restores safe, consistent power delivery and reduces risk of intermittent operation or electrical hazards. What it does:

• Supplies AC power from the outlet to the appliance's internal power input
• Replaces frayed, cracked, or damaged wiring that can cause intermittent power or failure to start
• Helps eliminate loose or corroded connector issues that produce sparks, arcing, or burning smells
• Restores a secure, factory-style connection when the original cord is worn or broken

• Disconnect the appliance from power at the outlet before servicing
• Route the cord and secure strain relief exactly as the manufacturer specifies to avoid pinching
• Inspect connectors and terminals for damage; replace the entire assembly if terminals are corroded or insulation is compromised

This Power Cord Assembly restores the main electrical connection so your appliance can receive consistent power. It replaces a damaged or worn cord to help stop power loss and reduce electrical arcing risks. What it does:

• Provides the primary power feed from the wall outlet to the appliance
• Replaces frayed, cut, or melted cords that cause intermittent power or no-power symptoms
• Restores a secure plug and wiring connection to prevent sparking or loose contact
• Works as the factory-style cord assembly used by the manufacturer

• One power cord assembly

• Disconnect the appliance from the power source before starting any work
• Route the cord and secure any strain relief or mounting clips exactly as the original
• Inspect connectors for proper seating and tighten terminal screws as needed

This remote controller assembly is the complete handheld control used to operate compatible appliances, restoring lost or damaged remote control functions for convenient, wireless operation. What it does:

• Sends the appliance's infrared/remote commands to control settings and cycles
• Replaces a broken, unresponsive, or missing remote to regain full remote functionality
• Helps resolve symptoms like no response from remote, intermittent command reception, or damaged buttons
• Works as the user-facing control interface for selecting modes, temperatures, or timed functions

• One remote controller assembly (as shown)

• Replace with the power source removed and follow the appliance manual for pairing or setup
• Handle electronic components carefully; avoid moisture and static discharge
• If the original remote used batteries, install fresh batteries and test operation after replacement
• If commands still fail, verify line-of-sight to the appliance and that the appliance receiver is powered

A replacement frame assembly that restores the appliance's front trim and helps keep the control area and door edges protected and aligned. Use this genuine-style part to replace cracked, bent, or cosmetically damaged front trim. What it does:

• Replaces the visible front trim or bezel that surrounds the control/door area
• Restores a flush, finished appearance and helps prevent debris from entering internal components
• Helps ensure proper alignment of the door/control opening when the existing frame is warped or damaged
• Commonly used when the trim is cracked, dented, loose, or shows cosmetic damage

• Always disconnect power before starting any repair to avoid shock or injury
• Remove any trim screws or clips holding the existing frame; retain fasteners unless a replacement set is specified
• Handle the replacement carefully to avoid scratching the finish; align tabs/clips before securing

This vent damper assembly keeps outside air and pests from entering the appliance while allowing exhaust to exit freely. It restores proper airflow and helps prevent cold drafts or backflow when the appliance is off. What it does

• Serves as the one-way flap for the external vent, opening during exhaust and closing afterward.
• Stops outside air and pests from entering the ducting when the appliance is idle.
• Helps reduce backdrafts that can affect drying or venting performance.
• Can reduce stray airflow and cold drafts into the laundry area.

• One vent damper assembly.

• Always disconnect power (and gas supply for gas appliances) before servicing.
• Access typically from the rear vent outlet or through the exterior vent hood; basic hand tools required.
• Ensure correct orientation so the flap opens outward with exhaust airflow.
• Inspect surrounding seal and ductwork; replace any damaged screws or gaskets during reassembly.

Terminal extract tool.

This single-phase AC motor is a direct-replacement motor used to drive the appliance's rotating components. It restores normal operation and helps eliminate issues caused by a failed drive motor. What it does:

• Turns the drum/agitator or other driven parts so the appliance can tumble, spin, or operate normally.
• Common symptom: appliance won't start or won't rotate when expected.
• Common symptom: loud grinding, humming, or unusual motor noise during operation.
• Common symptom: intermittent operation or motor stalls under load.

• Disconnect power before beginning any repair to avoid shock or injury.
• Remove appropriate panels and components to access the motor; keep fasteners organized for reassembly.
• Match wiring harness and mounting points exactly; reconnect wires by color/position and secure all fasteners.
• Test the appliance after installation and observe one full cycle to confirm correct operation.