Mew 653 Oddb Parts

Replace a cracked or missing shelf and restore a flat, easy-to-clean storage surface inside your refrigerator. This glass shelf fits the designated location in your unit to keep food level, visible, and organized. What it does:

• Provides a flat, stable storage surface inside the fresh food compartment
• Restores capacity when a shelf is broken or missing
• Helps prevent spills and tipping caused by uneven or sagging shelves
• Common signs: cracked/shattered glass, broken edge tabs, shelf won't seat securely, reduced storage space

• 1 refrigerator shelf

• Remove food items; carefully slide the old shelf straight out
• Handle glass with both hands; wear cut-resistant gloves
• Align front/rear edges with the side rails or locator tabs and push straight in until fully seated
• Do not force the shelf; re-align if it binds to avoid damage

A shoulder screw that secures appliance components and provides a precise pivot or spacer point. Replaces a missing or worn screw to restore alignment, reduce rattling, and keep panels and assemblies securely in place. What it does:

• Provides a fixed-diameter shoulder for pivots, spacers, or mounting points in assemblies.
• Holds panels and moving components at the correct distance to prevent binding or friction.
• A missing or worn shoulder screw can cause misalignment, rattling, or loose parts during operation.
• Used where a smooth-bearing surface and controlled clearance are required between parts.

• Disconnect power to the appliance (unplug or shut off breaker) before servicing.
• Handle small fasteners carefully to avoid dropping into assemblies; magnetic pickup tools can help.
• Start threads by hand to avoid cross-threading; tighten snugly but avoid overtightening.

The light switch assembly controls power to the appliance light circuit. Replace a worn or faulty switch to restore reliable on/off operation when your lamp won't turn on, won't turn off, or works intermittently. What it does:

• Opens and closes electrical contacts to supply or cut power to the light
• Controls cavity or task lights as designed for the specific model
• Typical symptoms: light won't turn on, won't turn off, or flickers/intermittently works
• Physical signs of failure: stuck/loose actuator or no continuity when tested

• 1 light switch assembly

• Disconnect power at the breaker or unplug the appliance before service
• Access location varies by model; remove necessary panels/trim to reach the switch
• Note wire positions and transfer them one at a time to the new switch; secure the mounting
• Restore power and test light operation before final reassembly

This replacement glass panel restores the visible door surface on compatible BOSCH appliances, helping repair cracks, chips, or scratches and returning the door to proper cosmetic condition. Use to replace broken or damaged door glass. What it does:

• Serves as the exterior/interior glass surface of the appliance door
• Replaces cracked, chipped, scratched, or otherwise damaged door glass
• Restores the door's appearance and supports proper door assembly fit
• Helps prevent direct exposure of internal components that damaged glass might allow

• Turn off power to the appliance and disconnect power before beginning service
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Door disassembly is commonly required — follow the manufacturer's service manual
• Do not use if shipping damage is evident; contact seller before installation

This control module is the appliance's main electronic control board. It interprets inputs and energizes components to run the correct sequences, restoring reliable operation when the original board is unresponsive, intermittent, or damaged. What it does

• Coordinates timing and operation of motors, valves, heaters, and other loads
• Monitors inputs from switches and sensors to make decisions
• Distributes power and controls relays/outputs to components
• Common failure symptoms: won't start, controls unresponsive or erratic, stops mid-cycle, or shows error codes

• 1 control module

• Disconnect power before servicing; electronic boards can carry residual charge
• Use ESD precautions; handle the board by the edges and avoid touching components
• Document wiring; move connectors one at a time and ensure they are fully seated and keyed correctly
• Secure the board and any ground straps; reassemble, restore power, and run the model's service/diagnostic test if applicable

This factory fixing kit provides the mounting hardware needed to secure the applicable component or panel on your appliance. Replacing worn or missing fasteners restores proper alignment and a solid, rattle-free installation.

• Secures panels, brackets, or trim to the appliance chassis or door
• Helps prevent shifting, vibration, and rattling during operation
• Restores correct alignment and fit when hardware is missing or stripped
• Useful during initial installation or when re-installing serviced parts

• Disconnect electrical power; if your appliance is plumbed, shut off water before servicing
• Follow your model's installation/service instructions for exact hardware locations and orientation
• Tighten hardware evenly; do not overtighten to avoid damaging plastic or sheet metal
• Verify alignment and smooth operation before restoring power and/or water

This door latch secures the appliance door and helps enable normal operation by keeping the door closed and latched during cycles. Replacing a worn or broken latch restores proper door engagement and reliable start/lock behavior. What it does:

• Secures the door closed so the appliance can run and complete cycles
• Engages with the strike to maintain a tight, consistent seal during operation
• Helps the control detect a closed/locked door and permit cycle start
• Commonly replaced when the door won't stay closed, won't lock, or the unit won't start

• One replacement door latch

• Disconnect power and water before beginning any repair
• Access may require removing the inner door panel or front trim—keep fasteners organized
• Verify alignment of the latch and strike before reassembly to ensure proper engagement
• If the latch has electrical connectors, reconnect securely and avoid pinching wires

This replacement screw secures appliance panels, brackets, and internal components so your unit stays assembled, aligned, and quiet. Use it to replace missing, stripped, or corroded hardware and restore a reliable factory-fastened connection.

• Fastens panels, brackets, or trim to the cabinet/frame
• Helps maintain proper alignment of doors, controls, or covers
• Replaces hardware that's missing, rusted, or with a stripped head
• Can help reduce vibration or rattling from loose fasteners

• Disconnect power and shut off gas/water supplies before service
• Match thread and length to the original; transfer any washers if present
• Start threads by hand to avoid cross-threading, then tighten with the correct driver
• Do not overtighten; snug until secure to prevent damage to plastic or sheet metal

Color: Black. Size: 12 oz. Acrylic appliance aerosol can spray paint.

Color: White. For black order WP98008545. For biscuit order 98008169.

Top door trim replaces the damaged decorative top edge of a refrigerator door, restoring a clean finished appearance and helping maintain proper door alignment and fit for consistent operation. What it does:

• Replaces cracked, chipped, or missing top door trim that affects appearance.
• Restores even door alignment and fit when the top edge is warped or bent.
• Helps keep dirt and moisture out of the door edge where trim is broken.
• Matches the factory black finish for a cohesive look.

• Remove food and support the door before beginning to prevent tipping; follow the appliance manufacturer's service instructions.
• Basic hand tools may be required; trim may snap or fasten into place—do not force parts or pry near the cabinet finish.

Thermal cutoff

Size: 10-32

User interface control panel that provides the buttons and display used to select cycles and view appliance status. Replaces a faulty control panel to restore responsive controls and clear cycle/status feedback. What it does:

• Registers user input from the touchpad/buttons; may fail if buttons are unresponsive or intermittent.
• Displays cycle progress and status indicators; can show blank, garbled, or missing segments when faulty.
• Sends user commands to the appliance control system; failure can prevent cycles from starting or changing.
• Common symptom linkage: unresponsive controls, no display, incorrect cycle selection, or persistent status/errors.

• Always disconnect power (unplug or shut off breaker) before servicing the appliance.
• Handle the display/overlay and ribbon/wire connectors carefully to avoid damage.
• Remove and replace the console using correct fasteners; ensure all connectors are fully seated.

This door window gasket seals the oven door glass to help contain heat and prevent steam or smoke from escaping. It restores a tight seal to keep cooking temperatures consistent and the kitchen cooler. What it does:

• Forms a heat-resistant seal around the oven door window to reduce heat loss.
• Helps prevent steam, smoke, and odors from leaking into the kitchen.
• Can improve oven temperature stability when the original gasket is worn or damaged.
• Common symptoms: visible gaps, brittle or torn gasket, excessive heat felt near the door edge.

• One door window gasket

• Inspect the door glass and channel for debris before installing; clean the area to ensure a proper seal.
• Installation typically requires removing the oven door or inner glass panel—follow the oven manufacturer's instructions.
• Use heat-resistant gloves and allow the oven to cool completely before attempting service.

This socket is an electrical connector used to join wiring or plug-in components, restoring a secure connection for reliable appliance operation. It replaces a worn or damaged socket to help prevent intermittent power or component failure. What it does:

• Provides a secure electrical connection between wiring and the appliance component
• Restores proper contact when a loose, corroded, or broken socket causes intermittent operation
• Helps prevent arcing or poor connections that can lead to component failure
• Used where a plug-in or push-fit electrical connection is required

• One socket

• Disconnect power to the appliance before inspecting or replacing the socket
• Replace only with the exact socket type specified for your appliance