Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
2 clamps included.
ORDERED TUBE AND CLAMPS Read more
This switch is mounted on the dishwasher frame and detects when the door is properly closed to allow the wash cycle to begin. Replace it if your dishwasher won't start even with the door firmly closed, or if it stops mid-cycle unexpectedly.
REPLACED DOOR LATCH AND DOOR LATCH ASSEMBLY. EVERYTHING WORKS AGAIN. Read more
Plastic cover that protects the drain pump mechanism from debris. Replace if cracked, broken, or tabs are bent preventing proper seal during drain cycles.
Watched AppliancePartsPros video, disassembled the dishwasher and replace impeller and seals. Read more
Replacement control panel facia for Bosch dishwashers. Covers control interfaces and buttons. Needed when cracked, chipped, or letters worn off from use.
Ordered part and saw how complicated the removal of existing panel was, did not want to break the plastic holders, then called our local appliance fellow and for $125 it was installed perfectly. Read more
This replacement screw secures panels, brackets, and internal parts in your appliance for a tight, rattle-free fit. Use it to replace lost, stripped, or corroded hardware and keep components properly fastened.
I had removed the frame some time ago to deal with a different issue. It turns out there are two types of screws. Apparently, when I replaced the screws, I did so randomly, and some did not quite fit the holes, and fell out and were lost over time. There are longer screws, 022 on your diagram, that fit the UPPER three holes in the dishwasher door frame. The shorter screws, 023 on your diagram, fit the lower three holes on the dishwasher door frame. The screw heads are the same, but the... Read more
Replacement mounting bracket for dishwashers. Secures unit to countertops and cabinetry. Replace if bracket is cracked, broken, or missing from installation.
Ordered parts from you and installed. I ordered the parts on Thursday evening and they arrived Saturday. Fast shipping! Read more
Fix a tilted or unstable dishwasher with this leveling leg. Ensures proper drainage and cleaning performance. Easy DIY install in minutes.
We took off the front panel and discovered the previous owner had stacked cardboard under a missing leg. We took the model number, ordered a new leg and front panel. It took just a few minutes to unscrew the washer, move it out, attached the new leg, level and reinstall. Read more
This metric M4 x 8 screw secures the toe-kick/lower access panel at the base of the appliance. Replace a missing or stripped fastener to keep the kickplate tight and aligned, helping prevent looseness and noise.
I went on your very user friendly website and looked up my bosch dishwasher. I love your diagrams and I felt confident that I could figure out what we possibly needed to get the door to close correctly and get the washer back working again. Your staff is courteous, service was fast and I would definitely recommend Appliance Parts Pros. Read more
Replaces cracked, broken, or missing dishwasher base panel (toe kick). Installs at bottom front of unit. Needed when panel is damaged or missing.
I ordered a new front panel and handle for my dishwasher to coordinate with the new stove and refrigerator. I watched the online video and it looked simple. We received the panel in great shape. We installed it in about 15 minutes. The only problem was the screws for the new handle. We did not realize that the new handle was closer to the door than the old handle so the old screws were too long. My husband went to the hardware store and got shorter screws and it all went together smoothly. Read more
Fix dishwasher not heating or running for hours. This NTC temperature sensor monitors water temp and prevents overheating. Moderate DIY repair with video.
Ordered new heater/thermostat piece. Read more
This turbidity sensor detects how clear the dishwasher's wash water is so the control can adjust cycle time, rinses, and water changes. Replacing a faulty sensor helps restore proper cleaning performance and normal cycle lengths.
Replaced the turbidity sensor. I watched the video on how to replace the sensor. It took me a little longer than what service rep. said. But I finely finished the repair and now my wife has been using the dishwasher for the past week. I kept checking for leaks but so far so good. Thank you Appliance Parts Pros for your help. I installed the sensor on 08/18/2020. Don Read more
O-ring seal prevents leaks between dishwasher components. Replace when you notice water drips or moisture buildup. Confirm fit with your model number.
WE replaced the drain pump and it still wouldn't drain sometimes. Finally we realized that the drain hose wasn't the correct bosch hose and the rubber was starting to bend and kink where it went through the hole to under the sink.So we bought the drain hose and replaced. Read more
The Float is an OEM part for Bosch dishwashers. This float senses water levels inside the dishwasher, signaling the inlet valve to refill when needed.
Causes of a float malfunctioning can be mineral deposits accumulating and weighing it down over time, or cracks in the plastic housing allowing water in.
Symptoms of a bad float include:
This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.
Replaced the defective float switch. Read more
Front-facing control panel facia for dishwashers. Houses buttons and digital display. Replace if cracked, broken, or attachment points are damaged.
Removed broken one and replaced it with a new one. Read more
Push-button cap for dishwasher control panels. Replaces broken, cracked, or missing buttons to restore control functionality and panel appearance.
Removed 10 Star Screws to get the door cover off and the fascia panel snapped off. Inserted the 6 buttons and the door handle into the facia panel prior to snapping it in place. Screwed the door cover back in place and the job was done. The facia has two tabs that need to be inserted into the door. Be careful not to crack them as they seem fragile. The first facia panel I ordered arrived with with one of those tabs cracked off. Read more
Secures panels, brackets, and trim pieces inside your dishwasher. Replace this fastener if stripped, missing, or damaged to restore tight assembly.
First I removed the three screws thathold in the trim and thought that the piece would just pop out. I was wrong. I had to remove the front door cover in order to remove the trim piece. Once removed the new piece snapped right into place. Screwed the front panel back on, and then replaced the three screws that hold the trim piece in. Time it took was about 20 minutes after I figured out how to go about it. All in all it was a fairly simple job. Read more