Tag Atlantis Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Whirlpool part

Fuse Holder (Fuse Clip)

By: Whirlpool

Part Number: 22004410

This fuse holder secures the appliance fuse in place and provides a safe, reliable connection for the fuse that protects electrical circuits. Replacing a damaged holder helps restore proper fuse seating and reliable power flow. What it does:

Holds and secures the appliance fuse or thermal fuse in its circuit
Ensures a solid electrical connection to protect against intermittent power or arcing
Commonly used where a blown or loose fuse causes loss of power, no-start, or intermittent operation
Restores safe mounting for a new fuse when the original holder is cracked, corroded, or loose

What's included:

One fuse holder

Install notes:

Disconnect power to the appliance before servicing to avoid shock or injury
Inspect surrounding wiring and terminals; replace any damaged connectors or frayed wires
Ensure the fuse is correctly rated and seated fully in the holder before restoring power

$12.95

Compare At:: $13.99
You Save:: $1.04

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Best Seller

Genuine Whirlpool part

Washer Transmission Lower Lip Seal

5.0 (7)

By: Whirlpool

Part Number: 207843

Prevents oil leaks from the transmission area. Replace if you see oil puddles under your washer. Confirm fit with your model number before ordering.

Do-It-Yourself Stories from Customers like You Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015

I had a lot of problems removing the spin hub, I had to use an air impact wrench to un screw it even then it was very hard, it did not go easy with the hammer & pipe wrench as shown in the video. It was also very hard to remove the bottom spin bearing I had to cut the bearing retainer with a dremel tool so I could get my puller on it. After I struggled to get it apart The repair went very easy, I used brake spring pliers to remove the springs it worked like a charm. I am very pleased with... Read more

Genuine Whirlpool part

Timer (Washer)

4.9 (15)

By: Whirlpool

Part Number: WP22003499

This replacement timer controls the sequence and duration of your washer's cycles, helping the machine advance smoothly through fill, wash, rinse, drain, and spin. Replacing a failing timer can restore consistent cycle progress and dependable operation.

Controls timing and sequencing for fill, agitate, drain, and spin operations
Switches power to the motor, pump, and water valves as each step advances
Advances the cycle knob/dial through each phase
Can also help with skipping rinse/spin or a dial that's hard to turn

What's included: 1 timer assembly Install notes:

Disconnect power before servicing
Remove the console/panel; pull off the knob and dial as needed to access the timer
Transfer wires one at a time from the old timer to the new; mount and secure the timer
Reassemble, restore power, and run a short cycle to verify operation

This part fixes the following symptoms

Timer will not advance

Do-It-Yourself Stories from Customers like You Clothes washer kept stalling between cycles sitting there full of water Mar J. • Redmond , WA • March 21, 2015

I replaced the main timer module. I went to the Maytag website, got the part number, then shopped around. I saved about $25 by ordering the same part from Appliance Parts Pros and the part arrive in 2 days! All went better than expected and our washer is working well again. Read more

Genuine Whirlpool part

Washer Tub To Pump Hose

5.0 (11)

By: Whirlpool

Part Number: WP22003285

Fix washer leaks and poor draining with a new tub-to-pump hose. Carries water from the outer tub to the drain pump. DIY repair takes just minutes.

Do-It-Yourself Stories from Customers like You General overhaul of a 14 year old machine Todd F. • Wellsburg , WV • January 20, 2016

Model# MAV7257AWW Maytag Atlantis Washing Machine. Repairs were fairly easy along with the videos appliancepartspros offers on their website. Parts also came with instructions on how to install. Other videos were available on You Tube. The only part difficult to install was Thrust bearing kit - make sure when installing to pull down on shaft so washer and e-clip will fit. Another note, you can get a pulley for your replacement motor pulley on eBay and Maytag.com. Just pay close attention to... Read more

Genuine Whirlpool part

Leg Assembly

5.0 (10)

By: Whirlpool

Part Number: WP25001119

Includes leg, foot pad and locknut.

This part fixes the following symptoms

Shakes and moves

Do-It-Yourself Stories from Customers like You I was not getting any cold water in my washing machine. Kenneth D. • Blasdell , NY • July 06, 2023

1.) Made sure BOTH Hot & Cold Water Lines turned off to Maytag Washer. (I have dual shut-off valve for those two water lines), 2.) Briefly ran Washer on Warm Water Setting, removing water pressure & remaining water from Hot & Cold water lines. 3.) Unplugged Washing Machine. 4.) Used Needle Nose Pliers to remove BOTH Hot & Cold Water hoses from the hookup on the back of the washer. 3.) Made sure I had an empty bucket, on hand, to catch remaining water that may come out of now-removed, hot &... Read more

Genuine Whirlpool part

Tub Seal

4.7 (28)

By: Whirlpool

Part Number: W10219156

Do-It-Yourself Stories from Customers like You Maytag atlantis making really loud noise during the spin cycle Carl F. • Park City , KS • March 02, 2015

First; The part was ordered on Thursday and I received it on Friday! The kit was the correct one and complete with everything needed. (Maytag Atlantis MAV6200AWW – APV4373103 tub seal kit & bearing) Great Service ! I will certainly recommend you guys ! Some of the things I encountered installing the tub-seal on a machine that is 15 years old: Be prepared to do considerable cleaning of the tub cover, tub assy and outer tub. The 4 tub assy bolts were very rusted to the point the ½ inch socket... Read more

Genuine Whirlpool part

Washer Brake Spring

5.0 (1)

By: Whirlpool

Part Number: WP21001910

Fixes squealing or slow stopping at end of spin cycle. This spring maintains brake tension so the basket stops promptly. DIY repair takes about 1 hour.

Do-It-Yourself Stories from Customers like You A scretching when the brake would be applied and the drum would come to a stop Mike W. • Batavia , IL • March 20, 2015

I replaced the: brake stator, rotor, and snubber ring. I did need to remove the stator which allowed the spring to decompress. I used 2 C-clamps to control the force when it was removed. To re-secure all the components I stood on the stator to compress the 200lbs spring until the screws could take the load safely. The entire thing took about an hour to slowly go through everything. Read more

Genuine Whirlpool part

Washer Timer

4.9 (13)

By: Whirlpool

Part Number: WP22003371

Fix a washer that won't advance cycles, stalls mid-wash, or skips spin. This timer controls your wash program. DIY-friendly, 10-15 minute repair.

This part fixes the following symptoms

Timer will not advance

Do-It-Yourself Stories from Customers like You Washer first failed to spin on one clothes setting then others and manual setting Mel T. • Henderson , NV • October 16, 2015

Replaced washer timer. Confirmed that old/broken timer had burnt (open) internal contacts. Read more

Genuine Whirlpool part

Water Inlet Valve

4.7 (10)

By: Whirlpool

Part Number: 12002158

The Water Inlet Valve is an OEM part for Whirlpool washing machines. This part controls the flow of water into the washer during the fill cycles. The valve opens to allow water to enter the tub and then closes once the desired water level is reached, ensuring the proper amount of water is used for washing. This valve includes the thermistor.

Causes of a bad water inlet valve can include mineral deposits and sediment buildup, electrical issues such as faulty solenoids, or wear and tear from frequent use.

Symptoms of a bad water inlet valve include:

The washer not filling with water
The washer filling slowly or not stopping filling
Leaks from the valve area
Inconsistent water levels during cycles

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

Potential series changes might cause the valve to be part number WP22004333. Make sure to verify your model number for the correct part.

This part fixes the following symptoms

Will not fill with water
No hot or cold water

Do-It-Yourself Stories from Customers like You I was not getting any cold water in my washing machine. Kenneth D. • Blasdell , NY • July 06, 2023

Genuine Whirlpool part

Lower Bearing Assembly

5.0 (10)

By: Whirlpool

Part Number: 12001562

Screws and instruction sheet included.

Do-It-Yourself Stories from Customers like You Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015

Genuine Whirlpool part

Washer Water Inlet Strainer Screen

5.0 (1)

By: Whirlpool

Part Number: WP22002960

Filters debris and sediment from incoming water before it reaches the inlet valve. Replace if clogged or missing to restore proper fill flow. Confirm fit.

Do-It-Yourself Stories from Customers like You Too much water filled into machine error code fe Terry H. • Columbia , SC • March 02, 2015

The machine would not run a full cycle before it cut off and had the code "FE" and water was too high. The water inlet valve needed to be replaced since it was letting in too much water at time. The repair was easy. Unplug machine and turn off cold water. Remove cold water line and drain water into bucket. Remove back two braces located at the top on each end of machine This will allow you to move top cove back about one inch. Pull back top cover about 1 inch then lift off cover. Remove... Read more

Genuine Whirlpool part

Retainer (Brake Spring)

5.0 (2)

By: Whirlpool

Part Number: WP35-2017

Do-It-Yourself Stories from Customers like You Bearings were worn out makeing a lot of noise Lawrence L. • Largo , FL • August 08, 2015

Genuine Whirlpool part

Washer Hinge Bushing

5.0 (1)

By: Whirlpool

Part Number: WP22002753

Replace your washer hinge bushing to restore smooth, quiet lid movement and proper alignment. Fixes squeaky or misaligned lids. Confirm fit with your model.

Do-It-Yourself Stories from Customers like You Would not drain or spin. William P. • North Las Vegas , NV • November 13, 2018

Replaced lid safety switch, actuator and plunger. Read more

Genuine Whirlpool part

Spring-Timer Knob (Timer Control Knob)

By: Whirlpool

Part Number: WP211065

This spring-timer knob replaces a worn, cracked or missing timer knob so you can set and adjust the appliance's mechanical timer reliably. Simple, direct replacement that restores the user control interface. What it does:

Fits onto the appliance's mechanical timer shaft to allow setting and advancing the timer
Restores a secure grip and pointer for accurate time selection
Commonly used to fix loose, cracked, stripped, or missing timer knobs
Helps resolve inability to turn or set the mechanical timer caused by a damaged knob

What's included: Includes: one spring-timer knob Install notes:

Disconnect power to the appliance before starting any repair
Pull the old knob straight off the timer shaft; align splines and press the new knob fully onto the shaft until seated
If the knob is tight, use a proper knob puller or gentle, even leverage to avoid damaging the shaft

Genuine Whirlpool part

Timer Knob - Champag

5.0 (1)

By: Whirlpool

Part Number: WP22003952

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Timer malfunctioned David K. • Akron , IN • October 28, 2017

Replaced timer in less than 5 minutes along with timer knob. Read more

Genuine Whirlpool part

Gasket

By: Whirlpool

Part Number: W10858715

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Tag Atlantis Parts

Fuse Holder (Fuse Clip)

Washer Transmission Lower Lip Seal

Timer (Washer)

Washer Tub To Pump Hose

Leg Assembly

Tub Seal

Washer Brake Spring

Washer Timer

Water Inlet Valve

Lower Bearing Assembly

Washer Water Inlet Strainer Screen

Retainer (Brake Spring)

Washer Hinge Bushing

Spring-Timer Knob (Timer Control Knob)

Timer Knob - Champag

Gasket

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Need help finding dishwasher parts?

Tag Atlantis Parts

We respect your privacy

Manage consent preferences