Need Help?
Call or text
Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.
Protective panel lining the bottom of your oven cavity. Replace if cracked, warped, or rusted from heat exposure and spills. Provides smooth surface.
I did research on my own prior to ordering. I looked at other sites, but was impressed with the online chatting-this was very helpful! I ordered three items and had difficulty with one rack. I called customer service and received a new rack the next day. This was meaningful to me because we were heading back home in a few days. The rep was very understanding to my situation and helpful. Read more
Replace your burned-out range light bulb to restore interior illumination. Swap in when bulb fails to see contents clearly. Verify fit by model number.
I just plugged in a replacement light bulb. Couldn't find one anywhere else but from you folks. Read more
The Screw is an OEM part for Whirlpool ranges. This screw is used to secure various components within the range, ensuring that parts such as panels, control boards, or burners are firmly attached and remain stable during operation.
Causes of a bad range screw can include regular wear and tear, over-tightening, or exposure to high heat.
Symptoms of a bad range screw include:
This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.
Replaced the hinge receiver with a new one. The old one was bent slightly inside where it could not be seen. I think someone pushed the door down to far or fell on it. 2 screws to remove it, take out storage drawer and reach up little ways to remove and replace the receiver. Replace the 2 screws. The receiver comes with 2 screws but I ordered an extra ( never used it ). The sides of the receiver were spread just a tiny bit but were enough to cause a problem. Read more
Adjustable leveling leg installs on the front or rear corners of your range. Replace if broken, cracked, or worn to stabilize and level your appliance.
Installed it according to video watched. Read more
Secures and finishes the end of your range oven door handle. Replace if cracked, broken, or missing to keep the handle firmly attached to the door.
Hire a handyman to fix the door. Everything went great. AppliancePartsPros.com was very helpful in making sure I had the screws and washer. Read more
Supports your range oven door for smooth opening and closing. Replace if your hinge is cracked, bent, or worn, causing the door to sag or misalign.
Replace two door hinges works great now. Read more
Range won't respond to controls or shows relay error codes? This electronic control board manages oven and cooktop functions. Moderate DIY repair.
Bought replacement relay board, replaced it. Would not work, turned stove circuit breaker off then on again. Display panel showed stove was resetting waited for reset, tested the bake option twice to ascertain it was working correctly. It worked! Our grateful appreciation to the customer service rep who helped us with our questions and the shipping. Wish we had gotten her name. Read more
This machine screw is used across appliances to secure brackets, covers, and internal components. Replacing a missing or stripped fastener helps keep parts aligned and tight, reducing vibration and preventing loose or shifting assemblies.
Using the video on your site I was able to make the repair. It was a pretty straight forward repair. Thanks for having the diagram on your site for helping me find the right part. Read more
Burner stuck on high or won't adjust temperature? This infinite switch controls heat levels for surface elements. Common DIY fix, 15-30 minutes.
Mounts to the range frame to anchor the door hinge arm. Replace if cracked, bent, or worn to restore proper door alignment and smooth operation.
I knew for sure that the hinge with the large spring was damaged, but elected to replace both hinges and receivers. Replacing the parts was fairly easy and would have taken me less then an hour. This model has thin metal covers over the hinge assemblies. I found that squeezing in the sides of the covers help to hold them in place on the hinge while reassembling the door. My only difficulty was putting the door back on the oven. It took a little maneuvering but I managed to get it. Now the door... Read more
The Broil Element is an OEM part for Whirlpool wall ovens and ranges. This heating element is responsible for the broiling function of the oven.
Located at the top of the oven cavity, the broil element functions by directing intense radiant heat downward to cook and brown food from above.
Causes may include natural wear and damage over prolonged high-heat use. Electrical malfunctions inside the element can also cause premature failure.
Symptoms of a bad broil element include:
This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
Watched videos online and with that knowledge it was a very simple process. Read more
Replacement broiler pan set for ovens. Includes pan and insert to catch drippings during broiling. Order if your original is missing, warped, or damaged.
I ordered the brioler pan for my new stove from y'all it was a little small but that's the part number in the book that I got with the stoveyall did a great job fast shipping just what I ordered will by from again thanks Read more
Burner not heating or heating unevenly? This surface heating element restores proper heat generation. Requires removing cooktop access panel.
Replacement screw secures door handles, panels, and brackets on your range or oven. Install when original screws are stripped, missing, or damaged during repairs.
Ordered 2 screws from AppliancePartsPros.com...had them in 2 days. Replaced damaged screws on handle. Read more
The Vent Trim is an OEM part for Whirlpool ranges. This is a decorative and protective cover that surrounds the vent or exhaust opening, enhancing the overall aesthetic appearance while also preventing accidental access to the vent area.
Causes of a bad Vent Trim include physical damage from impact or mishandling, exposure to excessive heat or moisture, and general wear and tear over time, leading to discoloration, warping, or deterioration of the trim material.
Symptoms of a bad part include:
Replaced vent trim part, and attached old handle to new vent trim. Read more
Burner won't heat or stuck on one temperature? This infinite switch controls your range surface element heat levels. DIY repair restores precise cooking.
I was able to clean the Oven Temp Sensor with 99% alcohol. Then replaced All switches (after breaker was isolated). Put it all back the way I found it. Turned on breaker. Tested all functions and had no reports of Fan Code re-appearing since. Read more