Zsc2201jss Parts

This halogen heater assembly replaces a failed halogen heating element in electric ovens, restoring concentrated radiant heat for broiling and browning. It's the OEM-style heater used where a halogen element provides high-intensity radiant heat. What it does:

• Radiant halogen heating element that delivers rapid, focused heat for broiling and surface browning.
• Restores proper broil performance when the oven's broil cycle is weak or food does not brown evenly.
• Connects to the oven's existing harness/terminals to replace a burned-out halogen lamp assembly.
• Designed as the OEM-specified heater assembly for models that use a halogen broil element.

• Disconnect power to the appliance at the breaker before starting work; allow the oven and element to cool completely.
• Handle the glass/halogen element carefully—halogen lamps are fragile and may break if dropped or flexed.
• Follow OEM wiring and mounting orientation; ensure connectors are fully seated and secure before restoring power.
• After installation, test broil function on a short cycle to ensure proper operation.

The Microwave Lever is an OEM part for GE built-in and over-the-range microwaves. This metal lever links to the door handle and activates the door switch when the handle is pulled open.

Causes of a bad lever can include wear from daily use over many years. Repeated opening and closing of the microwave door puts stress on the lever and surrounding components. 

Symptoms of a bad lever include:

• Power not disabling when door opened  
• Loose or improper connection to door handle
• Door not shutting or latching completely
• Delayed microwave engagement or shut-off

This GE part is also compatible with Hotpoint, RCA, and select Kenmore models.

This auxiliary cooktop holder is a replacement support bracket that helps keep the cooktop or burner assembly aligned and secure for stable, rattle-free operation. Restores proper positioning of components after wear or damage. What it does

• Supports and anchors the cooktop/burner assembly to prevent shifting during use
• Keeps burner and trim pieces aligned for even surface contact and safe operation
• Reduces rattling, vibration, and gaps between cooktop components
• Helps restore secure mounting after broken or worn original brackets

• Disconnect power (and gas, if applicable) before starting any repair
• Use proper hand tools; part secures with fasteners—retain and reinstall all screws
• Watch for sharp sheet-metal edges and wear safety gloves and eye protection

This flat metal tray is a replacement nonstick oven tray that gives you a flat cooking or drip surface for baking and roasting. It restores a level surface for pans and helps contain spills for easier cleanup. What it does:

• Provides a flat, rigid surface for baking, roasting, or catching drips beneath racks
• Restores proper fit when original tray is bent, warped, or missing
• Helps reduce food contact with oven floor and collects spills to prevent messes
• Nonstick finish eases cleanup when coating remains intact

• Install on the oven rack or support as shown in your owner's manual; ensure it sits flat before heating
• Allow tray to cool before handling to avoid burns
• Do not use abrasive pads or metal utensils on the nonstick surface to avoid damaging the coating
• Inspect coating for chips or flaking; replace if coating is compromised to avoid contamination

This nonstick metal broil pan grid provides a sturdy cooking surface for broiling, letting juices drain away for better browning and easier cleanup. Replaces worn or warped grids to restore consistent broiling performance. What it does:

• Holds food above the broil pan so heat circulates for even browning and searing
• Allows grease and drippings to drain away to reduce smoking and flare-ups
• Provides a nonstick surface to help prevent food from sticking and simplify cleanup
• Restores proper fit and stability when an original grid is bent or damaged

• Allow the oven and parts to cool completely before removing or installing the grid
• Slide the grid into the broiler pan or oven rack position as shown in your oven manual
• Clean with warm, soapy water; avoid harsh abrasives that can damage nonstick finish
• Follow all oven manufacturer safety instructions when operating the broiler

This holder assembly secures and positions internal components so they stay stable during operation, restoring proper alignment and preventing rattles or interference. What it does

• Secures internal parts to the chassis or frame to prevent movement and vibration
• Keeps wiring, sensors or small modules in the correct position for reliable operation
• Prevents contact or chafing that can cause noise or intermittent faults
• Replaces cracked, broken or missing mounts that allow components to shift

• Disconnect power to the appliance before beginning any service
• Use basic hand tools; avoid over-tightening fasteners to prevent damage

This LED board powers and/or controls interior lighting so the appliance interior is illuminated for easier visibility. Replaces a failed or dim LED module to restore consistent, energy-efficient light in the compartment. What it does:

• Provides LED illumination for the appliance interior or compartment.
• Supplies light when the door is opened or when the interior lighting circuit is activated.
• Commonly replaced when lights are dim, flicker, intermittently work, or do not light at all.
• Works with the original mounting and wiring harness to integrate with factory controls.

• Disconnect power to the appliance before servicing to avoid shock.
• Handle the board by its edges and avoid touching LEDs or circuitry.
• Verify proper alignment and secure mounting; reconnect any plugs fully.

A replacement board supporter that secures the appliance control board to the cabinet, helping keep the board stable and positioned away from wiring and chassis. Restores proper mounting to reduce vibration and movement of the control board. What it does:

• Holds and supports the control/PC board to prevent excessive movement or rattling
• Keeps the board spaced from the chassis and wiring to reduce risk of shorting or contact
• Helps maintain stable electrical connections for reliable control operation
• Reduces noise caused by a loose or vibrating control board
• Can prevent further wear on board mounting points and connectors

• Disconnect power to the appliance before beginning any service.
• Handle the control board by its edges and avoid touching components; use ESD precautions if available.
• Remove nearby panels or components as needed for access; retain all fasteners for reassembly.
• If mounting points or fasteners are damaged, inspect nearby parts and replace as required.

This halogen heater assembly replaces a failed oven halogen heating element to restore even, high-heat baking and broiling performance. Designed as a direct-fit OEM assembly to replace the oven's halogen heater module. What it does:

• Provides the halogen heat source for bake/broil functions in compatible ovens.
• Restores proper high-temperature heating when the oven fails to reach set temperatures.
• Fixes symptoms like weak or no broil, inconsistent baking, or a visible broken/charred halogen bulb.
• Works as the OEM heater module that connects to the oven's heater wiring and mounting bracket.

• One halogen heater assembly (complete heater module as shipped by the manufacturer).

• Disconnect power to the appliance before beginning work to avoid shock.
• Allow the oven to cool fully; halogen bulbs and housing may be hot or fragile.
• Handle the bulb/assembly carefully to avoid damage; follow OEM disassembly steps for inner panels and mounting screws.