Ksb5 Parts

The Kitchen Aid Blender Drive Coupler is an OEM part for Whirlpool blenders, specifically designed to connect the motor to the blender's blade assembly. This small but crucial component is responsible for transmitting the rotational force necessary for blending operations. Made from durable materials, it is engineered to withstand the stresses of frequent use.

Symptoms of a bad Blender Drive Coupler include:

• The blender’s blades not rotating despite the motor running
• Unusual noises during blender operation
• Visible wear or stripping on the coupler

Causes of a bad drive coupler can stem from overloading the blender, misalignment of the blade assembly, or simply natural wear and tear from repeated use.

This OEM part is also compatible with KitchenAid and certain models of Maytag, Jenn-Air, Amana, and Kenmore blenders.

The KitchenAid Blender Drive Coupler is an OEM part for KitchenAid blenders. This part connects the blender's motor to the blade assembly.

Causes for issues with the drive coupler often involve overloading the blender, blending hard or frozen ingredients without sufficient liquid, or simply the natural degradation of the component over time.

Symptoms of a malfunctioning Blender Drive Coupler include:

• The blender's motor running, but the blades not spinning
• Visible wear or damage to the coupler's teeth
• Unusual noises during operation, indicating a misalignment or damage

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Foot is an OEM part for Whirlpool stand mixers. This component is designed to provide stability and support to the mixer, ensuring it remains steady during operation. Positioned at the base of the mixer, the foot helps to prevent movement and vibration, which can enhance the efficiency of mixing and protect your countertop from scratches.

Symptoms of a failing Foot include:

• The mixer wobbling or moving excessively during use
• Increased noise or vibration when the mixer is running
• Visible wear, cracks, or deformation of the foot pad
• Scratches or damage to the countertop surface beneath the mixer

Causes of a bad foot can include prolonged use that wears down the material, exposure to heat or kitchen chemicals that degrade the foot, or physical damage from moving or storing the mixer.

This OEM Whirlpool part is also compatible with KitchenAid stand mixers.

Kitchen Aid blender dome and blade seal. Color: black. It measures about 3 inches in diameter.

The Dome and Blade Assembly is an OEM part for Whirlpool blenders. This assembly includes both the dome cover and the blade, which work together to blend ingredients efficiently. The dome ensures that contents are contained within the blender jar while the blade chops, purees, and mixes the ingredients to the desired consistency.

Causes of a bad dome and blade assembly can include wear and tear from regular use, damage from blending hard or frozen items, or corrosion and dulling of the blade over time. These issues can lead to decreased performance and the potential for leaks.

Symptoms of a bad dome and blade assembly include:

• Reduced blending efficiency or inconsistent results
• Leaks from the base of the blender jar
• Unusual noises during operation
• Visible damage or dullness of the blade

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This 8-32 x 5/8 screw replaces missing or damaged hardware specified by the manufacturer to secure panels, brackets, and internal components in your appliance. Restores a tight, rattle-free fit to help prevent vibration and misalignment.

• Provides the correct 8-32 thread and 5/8-inch length where specified
• Secures sheet-metal panels, brackets, and internal assemblies
• Replaces missing, stripped, or corroded screws
• Symptoms include loose or rattling panels, misaligned parts, or hardware that won't stay tight

• Disconnect power; shut off gas before servicing
• Support panels/components while removing or installing hardware
• Start threads by hand to avoid cross-threading; tighten only until snug
• Match the original screw's location and orientation for proper fit

This washer lid assembly replaces a cracked, broken, or misaligned lid so the washer can close and lock correctly, restoring safe operation and reducing cycle interruptions caused by a lid that won't align or latch.

• Covers the tub opening and aligns with the lid lock/strike for proper engagement
• Restores the safety interlock so wash cycles can start and run without interruption
• Helps contain splashing and keeps debris out of the washer when not in use
• Typical symptoms include visible cracks or shattering, warped or loose lid, broken hinge area, or intermittent lid-lock errors

• Disconnect power before servicing
• Protect the cabinet surface and support the lid during removal/installation to prevent damage
• If required by your model, transfer existing hinge hardware and fasteners to the new lid
• After installation, check alignment and ensure the lid lock engages smoothly before running a cycle

This replacement seal keeps liquids and food particles out of the blender motor housing to protect internal components and help prevent leaks. Fits the motor assembly where the shaft passes through the housing. What it does

• Seals the motor shaft opening to help prevent liquid from entering the motor housing.
• Reduces risk of motor damage or shorting caused by leaks into the base.
• Helps stop leaking at the blender base or around the blade assembly when worn.
• Replace if the seal is cracked, flattened, swollen, or shows visible wear.

• Always unplug the appliance before disassembly and removal of the jar or motor housing.
• Remove the blade and jar assembly per the service diagram to access the shaft seal; inspect mating surfaces and replace damaged components.
• Ensure the new seal is seated evenly around the shaft and in its groove; do not force or over-stretch the seal.
• After reassembly, run a short water test (with the unit unplugged from any direct water source) to check for leaks before normal use.

This factory replacement screw fastens appliance components securely. Use it to replace lost, stripped, or corroded hardware and restore a snug, rattle-free fit and proper alignment of panels and assemblies.

• Secures panels, brackets, and internal components to their mounting points
• Replaces missing or damaged fasteners to maintain correct alignment
• Helps eliminate vibration and rattling caused by loose hardware
• Restores the original fit with OEM-matched threads and dimensions

• Disconnect power and shut off water or gas supplies before servicing
• Use the correct driver bit that matches the screw head to avoid stripping
• Replace one fastener at a time to keep parts aligned
• Tighten snugly; do not overtighten to prevent stripped threads or cracked plastic

Screw: 8-16 x 3/8 inch.

Replacement blender jar that holds ingredients while blending, restoring a secure container for chopping, pureeing, and mixing. Replaces cracked, chipped, or leaking jars so the appliance can operate safely. What it does:

• Holds ingredients for blending, mixing, chopping, and pureeing.
• Restores a leak-free container when the original jar is cracked, chipped, or broken.
• Re-establishes a secure fit with the blender base so blades engage properly.
• Helps reduce mess and keeps ingredients contained during operation.

• Unplug the appliance before removing the old jar or installing the replacement.
• Inspect the jar base, gasket, and blade assembly; replace damaged seals before use.
• Align the jar with the drive coupling and secure per your blender's retaining method (twist/lock or bayonet).
• Follow OEM cleaning and care instructions; handle any blade components carefully to avoid cuts.

This Foot is the support pad the appliance or a mounted component rests on, helping keep it stable and properly leveled. Replace a worn or missing foot to reduce rocking and vibration and protect surrounding surfaces.

• Provides a stable contact point between the chassis/component and its mounting surface
• Helps maintain level placement for proper alignment and operation
• Cushions movement to reduce vibration and rattling noises
• Replaces cracked, flattened, or missing feet that cause wobbling or uneven stance

• Disconnect power and shut off any water or gas supplies; move the appliance carefully with assistance
• Access the foot location; remove the old foot and install the new one securely
• Adjust height/level as needed and verify the unit is stable before use

The Speaker is an OEM component specifically designed for Whirlpool brand washers. It alerts users with chime tones or voice prompts during cycle operation or any error states. Precise acoustic engineering allows for clear audio reception even amid operating vibrations. 

Symptoms of a bad speaker include: 

• No audio tones or voice prompts were heard  
• Muffled, distorted, or unusually loud sounds
• Speaker making rattling or buzzing noises

Causes can be damage from water damage, defects in the audio circuitry, or aging components. 

This speaker ensures optimal user communication. Without it, you cannot verify cycle progress or troubleshoot issues. Its dependable performance maintains the washer's convenience.

This Whirlpool OEM part fits perfectly while extending the equipment's lifespan. It is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and select Kenmore washers.