How to Read Dishwasher Error Codes (And What to Do When They Flash)
AppliancePartsPros Team / Wednesday November 18, 2026
Your dishwasher just stopped mid-cycle, and now there’s a cryptic combination of letters and numbers blinking on the display, or maybe the lights on the front panel are flashing in some mysterious pattern. That’s your dishwasher trying to talk to you. Error codes are the machine’s way of telling you exactly what went wrong, and once you know how to read them, you can skip the guesswork and get straight to fixing the problem.
Most homeowners see an error code and immediately assume the worst. But nine times out of ten, the issue behind that code is something you can diagnose and often resolve yourself. We’re going to walk you through how error codes work across major dishwasher brands, how to find yours, what the most common ones mean, and how to clear them once you’ve addressed the problem.
Why Learning to Read Error Codes Matters
Error codes exist because modern dishwashers have electronic control boards that constantly monitor every part of the wash cycle, water fill levels, drain timing, heating, motor speed, door latches. When a sensor detects something outside the expected range, the control board logs a fault code and usually halts the cycle to prevent damage.
If you ignore error codes, small problems become expensive ones. A simple drainage issue left unaddressed can burn out a wash motor. A faulty inlet valve that keeps running can flood your kitchen. Understanding what the code means lets you act fast, fix cheap, and avoid calling someone to tell you what your dishwasher already told you for free.
Safety First
Before you start poking around your dishwasher based on an error code:
Always disconnect power before inspecting or replacing any component. Either unplug the dishwasher from the wall outlet (usually under the sink) or flip the dedicated breaker at your electrical panel.
Turn off the water supply valve under the sink before working on any water-related component like the inlet valve or drain hose.
If your dishwasher has been running and you see an error code, let it sit for 10–15 minutes before opening the door. The water inside may be hot enough to scald.
Tools and Materials
You won’t need much to read and respond to most error codes:
-
Your dishwasher’s model number (on the label inside the door or along the door frame)
-
Owner’s manual (or a quick search for “[your brand] [your model] error codes”)
-
A multimeter (for testing components like thermistors, inlet valves, or heating elements)
-
Towels (in case there’s standing water)
-
A flashlight
-
Phillips and flathead screwdrivers
How to Find and Read Your Dishwasher’s Error Code
Step 1: Identify What’s on Your Display
Not all dishwashers show error codes the same way. Here’s what to look for depending on your machine:
-
Digital display models (most modern Whirlpool, Bosch, Samsung, GE, LG, and Frigidaire units) will show an alphanumeric code directly, something like E1, F2E2, i30, or HE.
-
LED-only models (no screen) communicate through blinking light patterns. Count the number of times a specific LED blinks, pauses, then blinks again. The first set of blinks is usually the first digit; the second set is the second digit. For example, three blinks, pause, two blinks \= error code 32.
-
Older mechanical-timer dishwashers don’t have error codes at all. If yours has a dial timer, you’re diagnosing by symptom and testing parts.
Step 2: Write Down the Exact Code
This sounds obvious, but get it right. There’s a big difference between F2E1 and F1E2 on a Whirlpool dishwasher, one might be a stuck button, the other a thermistor failure. Write down exactly what you see, including any letters, numbers, and whether they’re flashing or steady.
Step 3: Look Up the Code for Your Specific Brand and Model
Error codes are not universal across brands. An “E4” on a Samsung means something completely different from an “E4” on a Bosch. Always look up the code for your exact brand. Here’s a quick reference for the most common formats:
-
Whirlpool/KitchenAid/Maytag: Uses F#E# format (e.g., F6E2 \= communication error, F8E1 \= water supply issue)
-
Bosch/Thermador: Uses E## format (e.g., E15 \= water in the base pan, E24 \= drain issue)
-
Samsung: Uses codes like HE (heater error), 5E (drain error), 4E (fill error)
-
LG: Uses codes like OE (drain error), IE (inlet error), HE (heater error)
-
GE: Uses alphanumeric codes or blinking light sequences depending on the model. If you’ve got a GE flashing F50 or F51, we’ve got a detailed walkthrough for those specific GE error codes.
-
Frigidaire/Electrolux: Uses codes like i20/i40 (drain), i30 (leak), UO/UF (vent issues)
Step 4: Diagnose the Component
Once you know what the code points to, you can test the related component. For example, if your code points to a heating issue, you’d use a multimeter to check continuity on the heating element. If it points to a drain fault, you’d inspect the drain hose, pump, and filter for clogs.
When you’re ready to find the right part, grab your model number and head over to our repair help section to pull up the exact components for your machine.
Step 5: Clear the Error Code
After you’ve fixed the underlying issue, you need to clear the code from the control board’s memory. The method varies by brand, but these approaches cover most dishwashers:
-
Hard reset: Disconnect power for 5 full minutes, then restore it. This clears most codes on Whirlpool, GE, and Frigidaire models.
-
Button sequence reset: Some Bosch and Samsung models require pressing a specific button combination (like holding Start for 3–5 seconds or pressing a sequence during a diagnostic mode). Check your model’s documentation.
-
Run a test cycle: Many dishwashers clear the code automatically once the fault condition is resolved and a successful cycle completes.
If the code comes back after you’ve cleared it and run a cycle, the root cause hasn’t actually been fixed, go back and recheck your work.
Need More Help?
If your specific code isn’t covered here, or you’ve cleared it and it keeps coming back, post your brand, model number, and exact error code on our repair forum. Our community of techs and experienced DIYers can help you pin down exactly what’s going on with your machine.
Where To Find Us
If you need any replacement parts for your appliances, you can enter your model number at AppliancePartsPros.com to locate and order them quickly. Most orders arrive in just two business days, and we have tons of great information in our repair help section and YouTube videos to help you troubleshoot.
Stay connected with the latest DIY tips, tutorial videos, and repair guides by following us on Facebook, Instagram, and Twitter. We love hearing about your repair stories and successes. If you need more help or want personalized guidance, feel free to contact or call us at 877-477-7278. We’re ready to help you take on your next project with confidence!
Since 1999, AppliancePartsPros.com has helped millions of people repair their broken appliances by providing high-quality original parts at well below retail prices, free support and troubleshooting, and award-winning customer service from an expert, friendly, customer support team!
- Disconnect power before you start — unplug it or switch off the breaker, and confirm it’s dead.
- Follow your local electrical code.
- Anything involving household wiring, outlets, or the breaker panel itself is licensed-electrician territory.
Written by: AppliancePartsPros Team
The AppliancePartsPros Team is the technicians and parts specialists at AppliancePartsPros. We’ve spent a combined 100+ years working on appliances, and much of what we’ve learned is in our repair videos and these articles. We write to help you figure out what’s actually wrong before you buy anything.






Leave a Reply
Want to join the discussion?Feel free to contribute!