How to replace LG dryer lint filter duct cover MCK66787901

Is your LG dryer eating socks or snagging clothes? The culprit might be a broken lint filter duct cover, but fear not! Our straightforward guide and handy how-to video will walk you through the simple steps to replace it, saving your laundry day and your wallet.

Need a part?  Search below using your appliance model number to find exactly what you need:

The dryer lint filter cover fits in the lint filter port in your LG dryer to protect the air duct and lint screen housing. By keeping garments away from the exhaust air duct and the lint screen housing if the filter is accidentally left out, the cover can help prevent potential damage to laundry items.

You might need to replace the lint filter duct cover if it doesn’t lift up properly or if the plastic has cracked.

This part is easy to repair yourself and should only take a few minutes to complete.

You can find a replacement duct cover here. If you need other replacement parts for your LG dryer, just enter your model number at AppliancePartsPros.com to find them. It’s that easy! Most orders arrive in just two business days, and we have thousands of guides to show you how to install your new parts.

Let’s get started!

Watch the full repair here!

What is the lint filter duct cover & why would it need to be replaced?

The lint filter duct cover is a small flap that can be found at the top of the lint filter housing inside your dryer. It serves an important purpose: when you remove the lint filter to clean it out, the duct cover automatically closes to prevent anything from falling into the dryer’s inner workings.

Without a working duct cover, small objects can get sucked past the opening and make their way into the blower or heating element. This could cause much bigger problems and damage to your machine over time, which could cost you in new parts and repair time.

What you need

• New replacement lint filter duct cover (make sure it’s compatible with your specific model BEFORE installing)
• Phillips head screwdriver

Read more: DIY Dryer Troubleshooting: What Is Causing Slow Drying Times?

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by preventing any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.

How to replace the lint filter duct cover

Follow these steps to change out the lint filter duct cover in your LG dryer.

Step 1: Remove the old lint filter duct cover

1. Unplug the dryer from the electrical outlet.
2. Open the dryer door and remove the lint filter by pulling it straight up and out. Set it aside.
3. Inside, at the bottom front of the drum, find the lint filter housing. Use a screwdriver to remove the screws that hold this housing in place. There are typically 4 screws.
4. Slide the lint filter housing upward and out and place it on a flat surface.
5. Flip the lint filter housing over to access the underside. You’ll see 2 screws holding the duct cover in place. Remove both screws.
6. Find the spring along one side of the duct cover. Note how this spring sits.
7. Gently pry the old duct cover up and off the housing. The spring may come loose.
8. Set both the spring and old cover aside.

Step 2: Install the new duct cover

1. Insert the spring along the longer side of the new duct cover.
2. Fit the new cover into the lint filter housing opening. The spring should settle into its groove.
3. Press down firmly along the edges of the cover to snap it into place. The center hinge will also lock over the housing’s retaining pole.
4. Insert the 2 screws to secure the new cover and reattach the lint filter housing.

Read more: 9 Ways To Improve Your Dryer’s Performance

Step 3: Reassemble the dryer

1. Slide the lint filter housing back into the dryer opening and replace the 4 screws.
2. Replace the lint filter.
3. Take the filter out to make sure the cover springs close, then push it back in.
4. Plug the dryer back in.
5. Run a short test cycle to make sure everything works correctly.

Read more: How to Clean a Dryer Vent

More information

Thanks for reading! We hope this guide helped you replace the lint filter duct cover in your LG dryer.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel. We can also help you troubleshoot common dryer problems here.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!