How to Install a New Lid on Whirlpool Top Load Washing Machine

If your Whirlpool washer lid isn’t locking or closing properly, it’s time for a replacement. A faulty lid can prevent the washer from starting or cause cycle interruptions, often due to a broken latch or worn-out hinges. Whether you have a gas or electric model, we’ll walk you through the simple steps to swap it out and get your washer running smoothly again.

If you need any replacement parts for your Whirlpool washer, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

The information in this article may not apply to your specific appliance model. We recommend consulting your manufacturer’s documentation or contact us with any questions.

What you need

• 1/4″ nut driver
• Channel locks
• Multimeter
• 8mm socket with a ratchet

Safety tips

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock. 
• If the appliance has recently been used, give it plenty of time to cool down before working on it. 
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part. 
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.
• Don’t test live voltage with a multimeter if you’re unfamiliar with how to prevent short-circuiting.
• Consider wearing safety glasses and/or a dust mask when working with chemicals, dust or a large amount of debris to prevent irritation or injury.
• Turn off the water supply at the outlet before beginning repairs. Keep towels ready to catch any residual water in the system when removing parts.

How to replace the Whirlpool washer’s lid

Here are the steps to remove a damaged washer lid and install a new one quickly and easily.

Step 1. Remove the old lid

1. Unplug the washer from the power source.
2. Empty the washer to prevent any obstructions.
3. Open the washer lid fully.

1. Locate the two T15 screws on each side of the lid near the hinges.
2. Use a T15 Torx screwdriver to remove both screws and set them aside.
3. Lift the lid upward to remove it from the hinge pins. If it feels stuck, gently wiggle it while pulling upward.

Step 2. Install the new lid

1. Align the new lid over the hinge pins.
2. Slide the new lid onto the hinge pins so it fits properly.
3. Reinsert and tighten the T15 screws on both sides to secure the lid in place.

1. Open and close the lid to check for smooth movement.
2. Check that the lid sits flush with the washer and is securely attached.
3. Plug the washer back in and confirm proper function.

You made it!

We appreciate you dropping by! Hopefully this guide made it easy to replace the lid in your Whirlpool washer. If you’re still in need of any parts, head over to AppliancePartsPros.com with your model number. Our inventory of over two million parts and quick shipping means that you should get an exact replacement on your doorstep in just a few days. 

Got questions? We have answers! Give us a call at 1 (877) 477-7278 or start a chat with one of our customer service team members online. In the meantime, you can explore our DIY blog and check out our videos on YouTube. And don’t forget to follow us on Facebook, X and Instagram so you don’t miss out on our latest and greatest!