How to replace a Frigidaire refrigerator door bar

Does your Frigidaire refrigerator door bar seem loose or even cracked, causing your condiments to tumble every time you open the door? Don’t worry—you’re not alone, and the solution is simpler than you think! Dive into our step-by-step guide and accompanying how-to video below to seamlessly replace that faulty door bar and restore order to your fridge.

Looking for the right part? Enter your appliance model number below to find the exact match and get your appliance running like new again!

On a Frigidaire refrigerator, the door bar 215366002 is responsible for holding items in place on the door shelves, allowing your refrigerator to efficiently utilize space and keep items secure. Over time, use and wear can cause the door bar to become damaged. Common signs that indicate the need for replacement include cracks, looseness, or the bar not holding items as securely as before. Fortunately, with a few basic tools and some patience, you can tackle this repair yourself and get your refrigerator back in working order. So, let’s get started!

You can find a replacement refrigerator door bar here. If you need other replacement parts for your Frigidaire refrigerator, just enter your model number at AppliancePartsPros.com to find them. It’s that easy! Most orders arrive in just two business days, and we have thousands of guides to show you how to install your new parts.

The information in this article may not apply to your specific appliance model. We recommend consulting your manufacturer’s documentation or contact us with any questions.

Watch here: How To: Frigidaire/Electrolux Refrigerator Door Shelf Bar 215366002

Safety precautions

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind: 

• Always power off and unplug your appliance or switch off the circuit breaker before attempting any maintenance or replacement work. This keeps you safe by preventing any risk of injury from electric shock.
• Turn off the water supply at the outlet before beginning repairs to any appliance parts that hold water. Have towels ready for any residual water in the system when removing parts. 
• Wear insulated work gloves to protect your hands from sharp metal parts, pinching hazards and debris.
• Don’t test wiring with a multimeter for live voltage if you’re unfamiliar with how to prevent short circuiting when testing. 
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Take your time and don’t rush while working to prevent accidents and personal injuries.
• Work in a well-lit area so you can clearly see and access the interior parts.
• Clear your workspace of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with bare wet hands. Make sure the work area is completely dry.
• Check your user manual to see if there are specific installation or safety instructions for your part or appliance. 
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause injury.
• Wear safety glasses when working with chemicals, dust or cleaning large debris to prevent injury. 
• If the appliance has recently been used, give it plenty of time for any heating parts to cool down before working on it. 
• Take pictures or make a note of wiring terminals or other connections before disconnecting to prevent any problems with reassembly.

Tools needed

• Replacement part (make sure it’s compatible with your model before installing)
• flathead screwdriver
• Marker
• Sheet metal scissors

Replacement steps

1. Open the fresh food door to access to the door shelf bar that needs to be replaced.
2. Locate the support that holds the door shelf bar in place. It is usually a plastic piece attached to the interior of the door.
3. To remove the support, press the screwdriver against the tab located on the support and push down gently. This should disengage the support from the door.
4. Slide the support off the door and set it aside.
5. The new door shelf bar may be longer than the old one. However, it is designed to be universal and can be cut for various refrigerator sizes.
6. Place both the new and old door shelf bars on a table or work surface. Align the end of the old door shelf bar with the bottom of the new one. 
7. Use a marker pen to mark the end and side of the old door shelf bar on the new one. 
8. Cut the new door shelf bar to match the length of the old one. Be cautious and accurate during the cutting process.
9. Start by installing the bar on the left side. Slide it into the left support, ensuring it fits securely.
10. Bring the opposite end of the door shelf bar and place it into the corresponding support on the right side of the door.
11. Retrieve the support that was removed earlier and insert it back into its original position. Make sure it aligns properly and holds the door shelf bar securely.
12. With the replacement door shelf bar and support in place, you can now close the fresh food door.
13. Plug the refrigerator back into the power source. 

Additional information

Thanks for reading! We hope this guide helped you replace the door bar on your Frigidaire refrigerator. 

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Be sure to follow us on Facebook, Twitter and Instagram to see our latest repair guides!