How to replace foot pedal kit 882657 on a KitchenAid, Whirlpool or Maytag trash compactor

Is your KitchenAid trash compactor foot pedal no longer unlocking the drawer as it should? Don’t worry, with just a few tools and our step-by-step guide, you can easily replace the foot pedal kit yourself and have your appliance back in action. Plus, check out the how-to video below for a visual walkthrough!

The foot pedal serves as an unlocking device on your KitchenAid trash compactor. When it’s pressed down, it lifts the drawer and releases it.

Over time, with normal wear and tear or accidental damage, the foot pedal may become broken or unresponsive. Fortunately, with the right tools, a little guidance and a few minutes, you can replace the foot pedal kit yourself and get your KitchenAid trash compactor back to full working order in no time.

If you need foot pedal kit 882657, you can order it here. If you need any other parts for your trash compactor, you can find them here or enter your model number at AppliancePartsPros.com.

Watch here: How to replace Whirlpool/KitchenAid/Maytag Foot Pedal Kit 882657

What you need

• Phillips screwdriver – for removing and securing screws.
• Pliers – for gripping and holding small parts or for bending wires if needed
• Flashlight – To provide additional lighting when working in poorly lit areas.
• Safety gloves – for protecting your hands from sharp edges, slips, cuts, and pinches.

Read more: How A Kitchen Trash Compactor Works

Safety precautions

When working on any appliance repair, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before attempting any maintenance or replacement work. This keeps you safe by preventing any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time and don’t rush while working to prevent accidents and personal injuries.
• Work in a well-lit area so you can clearly see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• Consider wearing safety glasses and/or a dust mask when working with chemicals, dust or a large amount of debris to prevent irritation or injury.

Read more: Trash Compactor Won’t Start: Top 5 Reasons & Fixes

Installation steps

1. Turn off the trash compactor and disconnect it from the power source.
2. Press down on the foot pedal and pull out the drawer.
3. Lift the front of the drawer up by the handle until it goes over the drawer stops.
4. Take the drawer by the sides and remove it from the compactor.
5. Place the drawer on its back and, using the Phillips screwdriver, remove one screw on each side to detach the old foot pedal.
6. Remove the actuator switch from the old pedal and install it on the new pedal.
7. Align the new pedal in place and secure it with the two Phillips screws provided in the kit.
8. Place the drawer upright and install it on the tracks in the compactor.
9. Close the drawer completely.
10. Push down on the foot pedal and see if the drawer opens properly.
11. If everything is working correctly, plug the trash compactor back in or turn the power on at the circuit breaker.

Read more: Trash Compactor is Noisy: 5 Reasons and Fixes (With Video!)

Additional information

Thanks for reading! We hope this article helped you replace the foot pedal kit on your Kitchenaid trash compactor.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Be sure to follow us on Facebook, Twitter and Instagram to see our latest repair guides!