How to Replace the Clothes Rack or Hangers in Your Steam Closet

Noticed your steam closet’s clothes rack is bent, or your hangers just won’t stay in place anymore? No worries, replacing them is a quick and easy fix you can do yourself. Here’s how to replace the clothes rack or hangers in your steam closet and get it back to keeping your clothes fresh and wrinkle-free.

The information in this article may not apply to your specific appliance model. We recommend consulting your manufacturer’s documentation or contact us with any questions.

Why the Clothes Rack and Hangers Matter

The clothes rack and hangers inside your steam closet are engineered specifically for the job they do. Unlike a standard closet rod or wire hanger, these parts are designed to:

• Support clothing in the ideal position for steam flow
• Prevent garments from crowding together
• Withstand heat and humidity without warping or corroding
• Fit securely inside the steam closet chamber

If your rack or hangers are damaged or missing, you could experience:

• Uneven steaming, leaving wrinkles in some spots
• Garments touching or crowding each other, reducing airflow
• Rust stains or scratches on delicate fabrics
• A poor fit that makes the closet harder to use

Replacing worn or broken parts ensures your steam closet continues to deliver the best results every time you use it.

Signs You Need to Replace the Rack or Hangers

Not sure if it’s time to replace the rack or hangers? Here are some telltale signs:

• Rack is bent, sagging, or no longer level
• Hangers are cracked, chipped, or missing
• Clothes don’t hang evenly or slide around during a cycle
• Metal parts show signs of rust or corrosion
• Plastic parts have become brittle or warped from heat
• You notice marks or damage on clothing after a cycle

If you see any of these issues, it is worth inspecting the rack and hangers more closely and replacing as needed.

Tools You’ll Need

Replacing the rack and hangers usually requires very few tools. Here is what you might need:

• Phillips screwdriver
• Flathead screwdriver (if your model uses clips or tabs)
• Clean cloth for wiping down the interior
• Replacement rack and hangers

Check your steam closet’s model number. This is usually on a label inside the door or near the base.

Choosing the Right Replacement Parts

Before you order replacement parts, make sure you get the correct rack and hangers for your specific steam closet model. Not all racks are universal, they vary in length, shape, and mounting style depending on the manufacturer and model.

Step-by-Step: Replacing the Clothes Rack

If the main rack is damaged or worn out, follow these steps to remove it and install a new one.

Step 1: Turn Off and Cool Down

For safety, turn off your steam closet and unplug it. Wait until it has completely cooled before you begin.

Step 2: Remove Clothes and Old Hangers

Take out any garments, then remove the hangers and set them aside if you plan to reuse them.

Step 3: Locate Mounting Points

Open the steam closet door fully and inspect how the rack is secured. Most racks are attached at each end with screws or clips.

Step 4: Unscrew or Release the Rack

1. If your rack is screwed in, use a Phillips screwdriver to remove the screws at each end.
2. If it is clipped in, gently pry the clips open with a flathead screwdriver and slide the rack out.

Be sure to support the rack as you remove it so it doesn’t fall and scratch the interior.

Step 5: Clean the Area

Take a moment to wipe down the inside of the steam closet, especially around the mounting points. Remove any dust, lint, or water spots.

Step 6: Install the New Rack

1. Position the new rack so it lines up with the mounting holes or clips.
2. Insert and tighten the screws or snap the rack into the clips.
3. Make sure the rack is level and firmly attached.
4. Check that it doesn’t wobble or move when lightly pushed.

Step-by-Step: Replacing the Hangers

If the hangers are worn, warped, or broken, you can replace them without tools.

Step 1: Remove the Old Hangers

Simply slide the old hangers off the rack. Inspect them as you go and discard any that are cracked, rusty, or bent.

Step 2: Clean the Rack

Wipe the rack with a clean cloth to remove any residue left by the old hangers.

Step 3: Add New Hangers

Slide the new hangers onto the rack. Space them evenly to allow adequate room between garments during use.

Where To Find Us 

If you need any replacement parts for your appliances, you can enter your model number at AppliancePartsPros.com to locate and order them quickly. Most orders arrive in just two business days, and we have tons of great information in our repair help section and YouTube videos to help you troubleshoot.

Stay connected with the latest DIY tips, tutorial videos, and repair guides by following us on Facebook, Instagram, and Twitter. We love hearing about your repair stories and successes. If you need more help or want personalized guidance, feel free to reach out. We’re ready to help you take on your next project with confidence!