How To Replace the Samsung Washer Water Valve DC97-15459G

Is your Samsung washer refusing to fill with water or taking an eternity to do so? Don’t worry, fixing a clogged or faulty water inlet valve is simpler than you think and doesn’t require a professional touch. Check out the step-by-step guide and watch our how-to video below to get your washer up and running smoothly again in no time!

Looking for the right part? Enter your appliance model number below to find the exact match and get your appliance running like new again!

If your Samsung washer isn’t filling with water or is filling too slowly, there’s a good chance the water inlet valve (part #DC97-15459G) is clogged or faulty. This valve controls the hot and cold water flow into the washer and is a common fix when your machine struggles to start the cycle. The best part? You don’t need to be a pro to replace it. We’ll walk you through how to swap out the valve quickly and safely so your washer can run like new again.

The information in this article may not apply to your specific appliance model. We recommend consulting your manufacturer’s documentation or contact us with any questions.

Watch: How to replace Samsung water inlet valve

Safety First

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind: 

• Always power off and unplug your appliance or switch off the circuit breaker before attempting any maintenance or replacement work. This keeps you safe by preventing any risk of injury from electric shock.
• Wear insulated work gloves to protect your hands from sharp metal parts, pinching hazards and debris.
• Take your time and don’t rush while working to prevent accidents and personal injuries.
• Work in a well-lit area so you can clearly see and access the interior parts.
• Clear your workspace of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with bare wet hands. Make sure the work area is completely dry.
• Check your user manual to see if there are specific installation or safety instructions for your part or appliance. 
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause injury.
• Wear safety glasses when working with chemicals, dust or cleaning large debris to prevent injury. 
• If the appliance has recently been used, give it plenty of time for any heating parts to cool down before working on it. 
• Take pictures or make a note of wiring terminals or other connections before disconnecting to prevent any problems with reassembly.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.

Gathering Necessary Tools and Supplies

Replacing a Samsung inlet valve requires just a few basic tools and supplies:

• New Samsung OEM inlet valve – Using an off-brand valve may cause fit or performance issues. Stick with the manufacturer-recommended valve for your model. In this guide, we are using the Samsung DC97-15459G valve designed for this model.
• Adjustable wrench  
• Needle-nose pliers  
• Phillips screwdriver 
• Flashlight  
• Towels  
• Gloves 

Before starting, gather all these required tools and lay them out in a handy toolbox near your work area. Having everything ready ahead of time prevents delays or interruptions halfway through the repair.

Step-by-Step Valve Replacement Instructions

Now we’re ready to dive into the step-by-step process for safely replacing the water inlet valve on a Samsung washer:

1. Pull the washing machine away from the wall to access the water supply hoses and inlet valve located at the rear.
2. Use a flashlight to improve visibility behind the washer.
3. Place a towel beneath the valve to absorb drips.
4. Drain any residual water from the hoses into a bucket.
5. Use pliers to loosen the couplings attaching the hot and cold water hoses to the valve.
6. Unscrew the hoses by hand and detach them from the inlet valve.
7. Use a Phillips screwdriver to remove the two screws securing the valve bracket.
8. Carefully maneuver the bracket to detach it from the inlet valve.
9. With the bracket removed, you can now access and remove the inlet valve.
10. Gently wiggle and rotate the valve counterclockwise to detach it from the water lines.
11. Align the new OEM Samsung inlet valve with the water supply lines.
12. Rotate it clockwise while gently pushing to seat it properly within the fittings.
13. Replace the mounting bracket and screws to secure the valve in place.
14. Attach the hot water line to the red hot water inlet on the valve.
15. Attach the cold water line to the blue cold water inlet.
16. Hand tighten, then use pliers to tighten an additional 2/3 turn.
17. Double-check that all fittings and hoses are securely attached.
18. Turn the water supply back on and inspect for leaks.
19. Plug the washer back in and perform a quick test cycle.
20. Push the Samsung washer back into position against the wall.
21. Dispose of your old valve appropriately.
22. Give yourself a pat on the back for a job well done!

Additional information

Thank you for reading! We hope you found this information useful to get your washer working again.

If you have any other appliance repair needs or projects, don’t hesitate to explore our thousands of free videos and troubleshooting guides available. If you need replacement parts or some extra help, grab your model number and head over to AppliancePartsPros.com, where you can chat with a pro, order parts, read our DIY blog and more.

Be sure to subscribe to us on YouTube and follow us on Facebook, Twitter and Instagram!