Pro tips for replacing the oven control board in an electric Whirlpool range

Is your Whirlpool electric range refusing to heat up or respond to your commands? It might be time to replace the worn-out oven control board that’s causing all the trouble. With our easy-to-follow guide and a handy how-to video just below, you’ll have your kitchen superstar back in action in no time!

Looking for the right part? Enter your appliance model number below to find the exact match and get your appliance running like new again!

The oven control board in an electric Whirlpool range regulates the temperature and cooking functions. Over time, regular use can cause the oven control to become worn out or damaged.

Common signs that your oven control board needs to be replaced include the oven not heating to the set temperature, not responding to temperature adjustments, or malfunctioning control panel displays.

With a few basic tools and some patience, you can tackle this repair yourself and get your electric Whirlpool range back in working order. Let’s get started!

If you need any replacement parts for your Whirlpool range, you can enter your model number at AppliancePartsPros.com to order them. Most orders arrive in just two business days, and we have thousands of free guides to show you how to install your new parts.

Watch: How To Replace A Whirlpool Electric Range Control Board

What you need

• Replacement control board (make sure it’s compatible with your specific range model before installing)
• Phillips head screwdriver

Important: The specific tools required may vary depending on the model of your appliance and the type of fasteners used on it. Always consult the user manual or refer to any specific instructions provided by the manufacturer for the recommended tools for your appliance model.

Read more:  How to fix an electric Whirlpool range that won’t start after a self-clean cycle 

Safety precautions

When working on any appliance, remember to keep safety first. Here are some tips to keep in mind:

• Always power off and unplug your appliance or switch off the circuit breaker before you attempt any maintenance or replacement work. This keeps you safe by eliminating any risk of electric shock.
• If the appliance has recently been used, give it plenty of time to cool down before working on it.
• Take your time while working to prevent accidents and personal injuries. Rushing is the enemy of precision.
• Work in a well-lit area so you can see and access appliance parts.
• Keep your workspace free of clutter and other obstacles. Keep children and pets away from the work area.
• Never work on internal parts with wet hands. Make sure the work area is completely dry.
• Check the user manual to see if there are specific installation or safety instructions related to your appliance or replacement part.
• Be gentle when handling or removing parts. Excessive force might damage the appliance or cause personal injury.
• Wear insulated work gloves to protect your hands from sharp metal parts and debris.
• When working with wires, avoid touching any exposed wires or terminals. If you need to touch a wire, use a non-conductive tool or wear insulating gloves to prevent electrical shock.
• Always take photos or make a note of wiring terminals or other connections before disconnecting them to make reassembly easier.

Read more:  Electric Range Element Won’t Heat: Top 7 Reasons & Fixes

How to replace the oven control board

Follow these steps to replace the oven control board in your Whirlpool range.

Step 1: Remove the old control board

1. Unplug the range from the power source or turn off the circuit breaker.
2. Find the console cover on the range and remove it to expose the main oven control board.
3. Note where each wire is connected on the oven control board or take a photo to reference later.
4. Carefully disconnect all the wires from the oven control board terminals.
5. Remove the screws that hold the oven control board in place and set them aside.
6. Gently pull out the old oven control board and set it aside.

Step 2: Install the new control board

1. Align the new oven control board in the same position as the old one and secure it with the screws.
2. Reconnect all the wires to the corresponding terminals on the new oven control board.
3. Double-check that all wire connections are secure and properly seated.
4. Carefully replace the console cover and avoid pinching or damaging any wires.
5. Plug the range back in or turn the circuit breaker back on.
6. Test the range to make sure the new oven control is working correctly.

Read more:  How to replace a terminal block on an electric range

Looking for more?

Thanks for reading! We hope this guide helped you replace the oven control in your Whirlpool electric range.

If you still need some replacement parts, grab your model number and head over to AppliancePartsPros.com. We offer over two million parts and most orders arrive in two business days. If you need some help with finding the right part or placing an order, you can contact our team at 1 (877) 477-7278.

While you’re waiting for your new part to arrive, you can explore our DIY blog and watch thousands of video tutorials on our YouTube channel.

Follow us on Facebook, Twitter and Instagram to see our latest repair guides!