Customer Questions and Answers for Gas Range Lp Conversion Kit by Frigidaire

Todd, There is not a conversion kit from LP back to natural and you would need to replace the valves for the burners and on the oven loosen the orifices 1 1/2 to 2 turns.

Hello Agnes, the model number given does not show as a valid model number as per the manufacturer, would you recheck the model number for the stove and repost your question so we can locate the correct part for you.

Gil, the orifices would be installed into the burner valves once the burners are removed.

Hello Dave, the pressure regulator would need to be switched to LP gas, as far as the oven burner orifice hood it is convertible, turn the bake burner orifice hood about 2 full turns as if you were tightening it or until the orifice bottoms out, then adjust the bake burner air shutter wide open.

James, The conversion kit is part number 316243723. That will cover the top. The bottom or oven requires you to remove the cap from the pressure regulator and flip the nut over to where you see the lp stamping and replace the cap. Turn off your gas supply and no power when servicing this.

Brad, Based on your model the conversion kit still shows to be available just not in stock, it may take a few days to get. 318565413

Steve, To get the orifices for Natural Gas you would need to get the burner valves 5304458372 as this is the only way to get the orifice. The oven you would loosen the orifices 1 1/2 to 2 turns and close the air shutters to where they are about 3/4 of the way open. Flip the cap on the regulator from LP to NG.

Hello David, for the model number you've supplied you will want to order part number 316243723. Thanks!

Ronnie, The part number for the LP conversion kit on this unit will be GRLP4.

John, you will need part number GRLP4 to convert from natural gas to LP