G February 07, 2019 Door doesn't open. I have the spring. The panel popped out. Is there something else missing? THANK YOU
1 Answer G, with power disconnected from the microwave, you would have to manually release the door from the inside of the unit. Read More...
Todd W. June 07, 2018 for Model Number JES2251SJ02 My door won't open. The button has no resistance when pushed. I think I need to replace the spring (AP3792259), but can't get the door open. Can you tell me how?
1 Answer Hello Todd, You will need to remove the two screws on top of the unit that thread straight down toward the floor. These secure the air grille in place. Remove the air grille and you will see a single screw centered above the control panel. When it is removed you should be able to slip the control panel up and off, allowing access to the door latch mechanism through this opening. Read More...
Am Smith March 21, 2018 for Model Number JTP86S0H6SS The microwave door open button seems to be wearing out...no resistance when pushed..there is a lot of travel almost to the end before the door opens..is that the spring or the latch itself?
1 Answer Am Smith, This issue would most likely be caused by a faulty push button WB03T10210. Read More...
Molly November 28, 2017 for Model Number T965S0F3SS The button on my microwave doesn't work well and sticks out a bit. How do I know if the problem is the latch, button or spring?
1 Answer Molly, If the button is sticking out then the button would be the most likely cause for this issue and is part number WB03T10210. Read More...
Carol April 04, 2017 for Model Number WB09x10009 I ordered the spring for the spring button on my GE microwave. Now I don't have a clue how to replace it? Can you send instructions? Thanks, Carol
1 Answer Hello Carol. We will need your model number to help you with this. Please call 1-877-477-7278 or post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Melanie February 27, 2015 for Model Number JTP85W0A4WW I think the springs for the push button on my microwave are worn, because when I close the door the button pops out a little. What is the part number for the spring replacement?
1 Answer Melanie, The part number for the spring for the door push button would be part number WB09X10009. This most likely will be a button that is worn as opposed to the spring causing it to pop out a little. Read More...
Pam October 08, 2013 for Model Number GEJE18605B003 I need to replace the spring and lever switch. Can you tell me how to get to these parts?
1 Answer Hello Pam. The model number you provided is not working. We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
1 Answer Peter, The best way to replace the button or button spring, is to remove the cabinet, then remove the control panel assembly. We'll be sending you some additional inforation. Thanks Read More...