1 Answer Tom, The part that would cause this issue would be a faulty infinite switch part number EBF62174906. Read More...
Val January 31, 2026 for Model Number LUTE4619SN/00 Front and back burners on right side are high heat only.
1 Answer Val, With the elements working on high only, this would be an issue with the infinite switches EBF62174906 and EBF62174905. Read More...
Derryle September 03, 2025 for Model Number LREL6325F Left front burner would not work on high. Twisting the knob back and forth it would come on high but after at different position on the knob, now it will not come on at all .
1 Answer Hello Derryle, and thank you for choosing AppliancePartsPros.com. Based on what you’ve described, it sounds like the infinite switch EBF62174907 has failed. Read More...
Colin August 26, 2025 for Model Number LSEL6335FE If I turn on any one of the other burners, the far right front burner comes on along with the associated burner. If I just turn on the right front burner, it works normally. Only exception is the center back burner; when I turn that one on, the center back burner does not come on but the right front burner does. Is this a problem with the rotary switch? If so, which one is bad?
1 Answer Colin, Thank you for your question. It would be recommended to make sure that the infinite switch is good and that there is no damaged wiring. Read More...
Dan December 04, 2023 for Model Number LRE4211ST/00 I believe I need the part behind the knob. Are there different ones for each knob according to which burner?
1 Answer DAN, The switch on the far left is part# EBF62174907 & the one on the far right is part# EBF62174905 & the three in the middle are part# EBF62494601 Read More...
Bob Olson November 06, 2023 for Model Number Lre4211 st Front left burner ultra heat switch is bad is this switch a different part number then the other three
1 Answer Bob, This issue will most likely be the relay control board EBR80595403 that is faulty and would need to be replaced. Read More...
Kelly January 14, 2023 for Model Number LG LSE4613ST The front left burner which is the one that has "Ultra Heat" goes on high heat setting only... it will not adjust to lower heats as I turn the knob. I inspected the heating element and it does not look damaged, I think I should begin with trying to replace this switch first? Is that correct?
1 Answer Kelly, Thanks for the question!!! Yes, that is correct! The switch is responsible for regulating the burner temperature. Read More...