1 Answer Sharyl, A membrane switch is unable to be refurbished and will have to be gotten new. Read More...
S.W. June 12, 2018 for Model Number 66575822001 I have a Kenmore stove that needs a membrane switch. Can I use the Whirlpool part AP6012347 instead of the Kenmore part WP8272702?
1 Answer Hello S.W., WP8272702 is the same as the part recommended by Kenmore, (WP8272702), but has our part number assigned as a measure of inventory. Thank you for your patience and understanding in this matter. Read More...
1 Answer Hello Terry, These parts, WP8272997 and WP8272702, are not the same and we cannot guarantee they will interchange. Read More...
Lisa September 10, 2015 for Model Number 665.75822 I have a Kenmore select clean gas stove. When I try to press the up or down arrow to change the temperature sometimes it works, sometimes it doesn't. Would it be the control panel part # 8273640 that needs to be replaced or the switch membrane part # 8272702? Thanks
1 Answer Hello Lisa, If the model number is actually 66575822000, you should order the membrane WP8272702. Read More...
Rich February 19, 2014 Replaced microcomputer and switch membrane part 8272702 and all I get is PF and clock none of the controls work? What should I do?
Fs February 03, 2014 for Model Number Kenmore 665.95804 All functions of the stove work as they are supposed to. However, the part of the LED display that indicates the temperature is so dim that it is very hard to read. The part of the LED display that indicates the time is okay. Thank You Fred
1 Answer Hello FS. You will need to order and replace part number WP8523665 on the unit to repair the issue. Read More...
Marilyn December 26, 2013 for Model Number 665-95014100 Nathan @ Appliance pros suggested we contact you for replacing part # AP3120367 switch membrane OEM. We removed the back is about it. Thank you
1 Answer Hello Marilyn. Make sure the power is off and remove the clock from the unit. Then remove the ribbon cable from the board and unpeel the old membrane from the board. Stick new membrane to the board and install the ribbon cable. Reinstall the clock and back panel. Read More...
1 Answer Hi Alfredo, I could not get a valid hit on your model number but the code usally indicates "Keypad cable unplugged". Check the keypad connector for a firm connection (keypad connects to control board). Press CANCEL. If error code returns after 60 seconds, replace keypad (also called touch pad or membrane switch). Some models incorporate keypad on control board as one unit. In this case, replace control board (also called ERC or clock). Hope this helps! Read More...
1 Answer Hello Alfredo, We will need your model number to help you with this. Please post your model number with a new question on the parts page. http://www.appliancepartspros.com/modelnumber_locator.aspx Read More...
Biziman January 24, 2012 for Model Number 665.95014102 I had the exact same problem as above. I checked another supplier who said the Manufacturer discontinued this item. Was the issue above ever solved? I replaced the Control Board and the 2nd Switch Membrane (under Warranty) and there is no response. Thanks for responding.
1 Answer Hello BiziMan. Yes, the issue was that the ribbon cable for the membrane WP8272702 was not properly seated and was causing the buttons not to work properly. Once the ribbon cable was removed, reseated, and locked down on the control board, the unit worked properly. The PF was cleared by pressing the cancel/off button on the unit. Thank you! Read More...