50479 Parts

Burner not lighting or knob won't turn? This gas cooktop surface burner valve controls gas flow to individual burners. Moderate DIY repair.

This is a ceramic glow-bar igniter for gas ovens. It heats to ignite the gas for baking or broiling, restoring reliable oven lighting and even heating without repeated clicking or open flames.

• Heats up to light the gas burner in the oven cavity
• Common fix for oven not heating, long preheat times, or burner that lights then goes out
• Designed for ovens that use a glow-bar (hot surface) ignition system

• Disconnect power and shut off gas before servicing
• Handle the ceramic element carefully; avoid touching the carbide tip
• Test for proper ignition and observe a full heat cycle after installation

This replacement capacitor restores reliable starting power to a refrigerator's compressor and fans, helping the appliance reach and maintain proper cooling. Use it to address start-up failures and intermittent cooling issues. What it does:

• Provides the electrical boost needed for compressor and fan motors to start reliably.
• Stabilizes motor operation during run cycles to prevent frequent cycling or poor cooling.
• Common symptoms of a failing capacitor: compressor humming without starting, fridge not cooling, or intermittent compressor operation.
• Designed to match the original part's function for proper motor start and run performance.

• Always disconnect power to the appliance before testing or replacing the capacitor.
• Capacitors can hold a charge; discharge safely.
• Verify replacement matches the original capacitor's ratings and mounting style before installation.

Replacement mounting screw for gas cooktops. Secures panels, trim, and brackets. Needed when original screw is stripped, missing, or damaged during repair.

A replacement refrigerator water filter that helps reduce taste and odor issues and improves clarity of drinking water. Fits inline into the refrigerator's water/ice system to restore cleaner-tasting water. What it does:

• Filters impurities that can cause off taste or odor in dispenser water and ice
• Helps reduce visible particles and cloudiness in dispensed water
• Supports proper water flow for the dispenser and ice maker when functioning correctly
• Commonly replaced when water tastes bad, smells, or appears cloudy

• Replace with manufacturer-recommended filter and follow refrigerator-specific instructions
• Turn off the water supply and dispense water briefly to depressurize before removing the old filter
• After installation, flush several gallons of water per manufacturer guidance to clear air and loose carbon
• Dispose of the used filter according to local regulations; check for any refrigerator-specific priming steps

The Lamp is an original and genuine OEM replacement part for Frigidaire microwaves. It is located inside the microwave and provides light to easily see food and monitor cooking progress.

Causes of a bad lamp can be natural bulb burnout over time, damage from foods accidentally jostling the lamp during cooking, or general wear and tear.

Symptoms of a bad lamp include:

• Dimming or flickering light inside the microwave when in use
• No light turning on when the microwave is powered on
• Broken or cracked bulb housing

This genuine Frigidaire OEM replacement part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Hex screw fastener for securing lawn mower components. Replace if stripped, rusted, or missing to ensure proper assembly and equipment stability.

Throttle control won't adjust engine speed or feels sticky? This throttle control box restores smooth speed regulation on lawn tractors and tillers.

The Thermostat is an OEM part for Frigidaire microwaves. Situated near the top of the microwave cavity, it accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

Bell washer adds spacing on shafts in lawn tractors, tillers, mowers, and chipper shredders. Replace if washer is missing, worn, or damaged during maintenance.

The Thermostat is an OEM part for Frigidaire microwaves. The thermostat accurately monitors interior temperature levels during operation.

Symptoms of a faulty thermostat include:

• Inconsistent or uneven cooking results from inaccurate sensing  
• Continuous running even after the set time elapses
• Error lights or temperature faults displayed 

Failure usually occurs due to a gradual loss of calibration from years of thermal cycling stress or corrosion buildup damaging electrical components. Replacement is needed to restore precise temperature regulation.

This OEM Frigidaire replacement part is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore microwave models. 

Fix a microwave that won't start, has no display, or ignores settings with this electronic control board. Restores all functions and user controls.

Secures internal components to the microwave chassis. Replace if cracked, broken, or missing to restore proper support and stop rattling or misalignment.

Microwave not heating or making buzzing noises? This diode rectifier allows current flow in one direction and protects circuits. DIY repair takes 30 minutes.

The choke cable opens and closes the valve that controls the choke, or throttle, on the lawn mower. When the choke handle is depressed or pulled out, it will open or close the butterfly valve, controlling fuel flow to increase or decrease the speed and performance of the mower. Based on the type of tension cable that is used, this part can wear out or even snap from regular use and need to be replaced. The durable choke cable will be easy to install, but always disconnect the spark plug and wear gloves. This genuine OEM choke cable can be used with mowers from RYOBI, MTD, Husky, Yard Machines, Yard-Man, Troy-Bilt, Cub Cadet, and Bolens. It is made of metal and plastic and comes directly from the manufacturer to ensure quality. Sold individually.

This electromechanical switch assembly controls a specific user or internal function and restores reliable on/off or selection response. Replace a worn or damaged switch assembly to regain proper control and appliance usability. What it does:

• Acts as the electrical switching component for the appliance control circuit
• Enables user input to be registered (on/off or selection) and sent to the control system
• Common symptom: appliance won't respond when a control is pressed or switched
• Common symptom: intermittent or non-working control operation, no clicking or circuit continuity when activated

• Disconnect power before accessing or replacing the switch to avoid shock
• Access panel or control bezel removal may be required
• Handle wiring connections carefully; match terminals and secure connectors