744441 Parts

Secures the burner tube assembly to your range frame. Replace this bracket if it's bent, broken, or missing to properly mount and stabilize the burner tube.

Upper drain hose with elbow fitting for washers. Replaces cracked, leaking, or damaged drain hoses that cause water drainage issues during wash cycles.

Decorative trim panel that covers the base of your range. Replace this toe plate if it's cracked, scratched, or missing to restore a finished look.

This hinge pin spacer helps position the refrigerator door hinge pin for proper door alignment and smooth operation. It replaces a worn or missing spacer to restore correct hinge spacing and reduce door binding. What it does:

• Holds the hinge pin at the correct height and offset for the upper or lower door hinge
• Helps prevent door sag, misalignment, and uneven sealing
• Reduces metal-on-metal contact and rubbing that can cause noise or wear
• Works at either the upper or lower hinge location as specified for your model

• One hinge pin spacer

• Disconnect power to the appliance or unplug the refrigerator before starting any repair
• Support the door while removing hinge hardware to prevent the door from falling
• Reuse existing hinge pin and hardware unless damaged; replace any worn fasteners

Mounting plate that secures the temperature probe inside your oven cavity. Replace if the original plate is cracked, broken, or missing to properly support the probe.

Slide bracket that supports and guides oven racks smoothly in and out. Replace if cracked, bent, or missing to restore proper rack movement in your range.

Burner tube for cooktop gas burners. Connects gas valve to burner head. Replace if cracked, corroded, or damaged to restore proper gas flow and fit.

Replace a cracked, corroded, or damaged oven burner tube that routes gas from the manifold to the burner ports. Restores proper gas flow and even heat.

Burner tube for gas ranges. Delivers gas from the valve to the burner head. Replace if cracked, corroded, or damaged to restore proper gas flow.

This burner tube connects the gas valve to the burner on your range. Replace if tube is cracked, corroded, blocked, or shows signs of wear or damage.

Endcap for electric ranges. Covers and protects the end of a trim or component. Replace if cracked, broken, or missing to restore appearance.

This refrigerator/freezer door gasket creates an airtight seal around the door to help maintain proper temperature and reduce energy use. It replaces a worn or damaged seal to improve cooling and reduce frost buildup. What it does:

• Seals the cabinet to keep cold air in and warm air out
• Helps prevent excess frost and moisture inside the compartment
• Reduces compressor run-time caused by air leaks
• Restores proper door alignment and consistent cooling

• Disconnect power and remove food from affected compartment before starting
• Remove the old gasket and thoroughly clean and dry the gasket channel before installing
• Press the new gasket into the channel evenly, starting at a corner and working around the door
• Check the seal by closing the door; adjust or reseat as needed for a uniform contact

Rubber or plastic bushing that cushions and supports the oven door. Replace if cracked, worn, missing, or causing door misalignment or rattling.

Insulates and cushions the oven cabinet interior. Replace if cracked, damaged, or missing to restore thermal separation and reduce condensation.

Rubber grommet plug that seals the light switch opening in your range control panel. Replace if cracked, torn, missing, or no longer providing a tight seal.