79641582 Parts

The Stator Assembly is an OEM replacement part for LG washing machines. It is an electrical component inside the motor that converts rotational motion to electrical energy to power spinning motions.  Note: For the RPS or Hall Sensor, order part number AP7015078.

Symptoms of a faulty stator include:

• Slow or inefficient spinning, rubbing noises  
• The machine failing to fully drain or spin clothes
• Repeated blowouts or failure of related motor components

Causes can be wear and tear over extended use. Environmental factors like dust and moisture exposure may degrade insulation integrity. 

This OEM stator is also compatible with some Kenmore front-load washer models.

The Air Chamber is an OEM part for LG washing machines. This part connects to the pressure switch and ensures the washer machine fills with the correct amount of water for the selected cycle. 

Causes of a bad  Air Chamber can include clogging due to detergent residue or debris, cracks or perforations that lead to air leaks, and aging of the material, which might compromise its integrity and function.

Symptoms of a faulty Air Chamber include:

• Inaccurate water level readings leading to overfilling or insufficient water during cycles
• Unusual noises during the fill cycle, indicating air escaping
• The washing machine failing to start the wash cycle due to improper water level detection
• Error codes displayed on the machine that relate to water level issues

This OEM LG part is also compatible with some Kenmore models.

Includes sensor probe

Restore stable, level support with this replacement leg assembly. The adjustable foot steadies the unit on uneven floors, reducing vibration and rattling while allowing precise leveling for proper alignment and smooth, reliable operation.

• Provides adjustable support at the base of the unit
• Helps keep the appliance level on uneven or sloped floors
• Reduces wobble, vibration, and rattling noises
• Promotes proper door alignment and closure
• Replaces stripped, cracked, or missing leg assemblies

• Disconnect power; shut off water supply if applicable
• Carefully tilt and support the appliance to access the leg area
• Unthread the old leg; hand-thread the new assembly to avoid cross-threading, then fine-adjust with a wrench
• Level front-to-back and side-to-side; confirm stability before use

The Dispenser Assembly is an OEM part for LG washing machines. It is responsible for housing and dispensing the detergent, fabric softener, or other laundry additives at the appropriate times during the wash cycles.

Causes of a faulty dispenser assembly can include clogging or blockages in the dispenser mechanism, damage to the dispenser drawer, latch, or electronic components controlling the dispensing process.

Symptoms of a bad dispenser assembly include:

• Detergent or fabric softener not being dispensed properly
• Leaks or drips from the dispenser area
• The dispenser drawer, door, or compartments not opening or closing correctly

This OEM LG part is also compatible with some Kenmore models.

This water level pressure switch senses the washer tub's water level and signals the control to start or stop filling. It restores accurate fill detection for proper wash cycles and helps prevent overfilling or improper operation. What it does:

• Detects water level via a vacuum hose and tells the control board when to stop filling
• Helps prevent overfill, underfill, and related cycle interruptions
• Can resolve symptoms like washer not filling, overfilling, or stopping mid-cycle
• Works as the sensing interface between the tub and the control system

• One water level pressure switch assembly

• Disconnect power and shut off water supply before replacing the part
• Note the vacuum hose routing and electrical connector locations before removal
• Handle the small vacuum hose and plastic fittings gently to avoid damage or air leaks

This outer tub cover protects the washer's drum assembly and helps keep water and components contained during operation. It replaces a worn or damaged cover to restore proper sealing and prevent leaks or debris intrusion. What it does:

• Covers and protects the washer tub and internal components from water, lint, and foreign objects.
• Helps maintain proper alignment and sealing of the tub during wash cycles.
• Commonly replaced for visible damage, cracks, or when leaks appear around the tub area.
• Supports stable drum operation by keeping internal components enclosed.

• Disconnect power and turn off water supply before starting any repairs.
• Installation may require removing the cabinet or drum assembly; follow the service manual for step-by-step guidance.
• Handle the cover carefully to avoid scratching or bending mounting tabs.

The Inlet Hose is an OEM part for LG washing machines. It connects the water supply to the dispenser drawer, enabling the precise delivery of water to distribute detergent, fabric softener, and bleach during the wash cycle. This hose plays a key role in ensuring that cleaning agents are effectively mixed with incoming water, optimizing wash performance.

Causes of a bad Inlet Hose can include blockages due to sediment build-up, wear and tear from regular use, or damage during installation or maintenance, leading to improper functioning.

Symptoms of a bad Inlet Hose include:

• Inconsistent water flow to the dispenser
• Leaks during the fill stage of the wash cycle
• Detergent residue left in the dispenser drawer
• Issues with the washing machine's ability to start the wash cycle properly

This OEM LG part is also compatible with Sears/Kenmore.

This is a replacement multi-connector wiring harness that restores factory electrical connections between appliance components, helping return proper control and motor function when the original harness is damaged or faulty. What it does:

• Carries power and signals between control board, sensors, and motors
• Replaces damaged, frayed, or corroded wiring that can cause intermittent or no operation
• Helps resolve symptoms like controls not responding, motors not running, or erratic behavior caused by wiring faults
• Maintains correct connector fit and routing to preserve OEM electrical connections

• Disconnect power to the appliance before starting any repair
• Compare the new harness to the old one to confirm connector types and routing before disconnecting components
• Route and secure the harness per the OEM layout; avoid pinching or sharp bends

This tub clamp secures the washer tub assembly or related hoses to keep components aligned and reduce movement during operation. It helps restore proper fitment so the tub stays stable and functions quietly. What it does:

• Holds the tub or tub-related components in place to prevent shifting during cycles
• Helps reduce vibration and noise caused by loose tub mounting
• Maintains correct alignment of hoses and seals to reduce leak risk
• Used when a worn or broken clamp allows excessive tub movement

• One tub clamp

• Turn off power and water supply before beginning any repair
• Inspect surrounding components (hose, seal, mounting points) and replace if damaged
• Use common hand tools; secure clamp evenly to avoid twisting the tub or hoses

This cabinet assembly is the main outer housing that supports and protects the appliance's internal components while restoring appearance and structural integrity. Replacing a damaged cabinet helps stop drafts, reduce noise, and keep parts properly aligned. What it does

• Replaces the appliance's outer cabinet to restore proper fit and finish
• Protects internal components from dust, moisture, and physical damage
• Helps correct misalignment that can cause noise, rattles, or door fit issues
• Restores factory appearance for cosmetic damage, dents, or corrosion

• One cabinet assembly as shown

• Installation may require panel removal and reassembly of internal components
• Disconnect power and any water supply before starting work to avoid electrical shock or leaks
• Keep fasteners and trim organized during disassembly to ensure correct reinstallation
• Inspect gaskets, clips, and related fasteners and replace if worn or damaged

This cover assembly replaces the tub cover that protects internal components and helps seal the wash compartment for proper operation. It restores the cabinet appearance and keeps water and debris away from the tub area. What it does:

• Forms the protective top/face of the tub area to prevent water spray and debris from reaching internal components.
• Helps maintain a proper seal and support for the tub and adjacent components.
• Commonly replaced when cracked, warped, or damaged by impact or excessive wear.
• Can reduce leaking and rattling caused by a broken or loose tub cover.

• Refer to the washer's service manual for step-by-step removal and reassembly instructions.
• Disconnect power and water supply before starting any repair.
• Handle the cover carefully to avoid scratching or bending mounting tabs.
• If fasteners, clips, or trim are damaged, replace them.