Ajem12dcf Parts

Fix weak airflow or no cooling in your room air conditioner with a new axial flow fan. This part circulates air across the evaporator coils. DIY-friendly.

Is your air conditioner not cooling properly or overheating? The condenser assembly releases heat from refrigerant. Moderate repair, 1-2 hours.

Air conditioner not cooling or making unusual noise? This fan motor powers airflow in your room AC unit. Moderate DIY repair with basic tools.

This flat washer provides a secure, even load distribution for a fastener on the appliance, helping maintain proper assembly and reduce loosening or wear. Use it to replace a damaged or missing washer during repairs. What it does:

• Sits under a nut or bolt to spread load and protect the appliance surface
• Helps prevent fasteners from loosening due to vibration
• Restores proper spacing and alignment for connected parts
• Commonly replaced when you see corrosion, cracking, or a loose connection

• One flat washer

• Disconnect power and turn off water supply before starting any repair
• Tighten fasteners to a snug fit—avoid over-tightening which can crush the washer
• If adjacent parts show damage or corrosion, inspect and replace as needed

This nut with attached washer is a small securing fastener used to clamp appliance parts and prevent loosening. It provides a low-profile, integrated washer bearing surface for a reliable hold. What it does:

• Secures panels, brackets, or components to prevent movement and rattling
• Maintains clamping force where an integrated washer is needed
• Helps keep electrical and mechanical connections stable
• Common symptom: loose or vibrating parts, squeaks, or components that shift during use

• One nut with attached washer

• Disconnect power and water before servicing
• Use the correct socket or wrench to avoid rounding the nut
• Tighten to snug fit — avoid overtightening which can strip threads or damage parts
• If replacing a rusted or damaged fastener, inspect mating threads and replace as needed

This spring washer provides resilient tension to help keep screws and bolts from loosening on appliance assemblies. It's a simple replacement part that restores proper fastener tension and helps maintain secure connections. What it does:

• Applies spring force around a fastener to resist vibration-related loosening
• Commonly used on panels, brackets, and components that see movement or vibration
• Can reduce rattling and intermittent connection issues caused by loose hardware
• Works with 6 mm-diameter fasteners where a small lock-style washer is required

• Disconnect power and unplug the appliance before servicing
• Use the correct 6 mm fastener and proper orientation when reinstalling
• Tighten hardware to the OEM's recommended torque if available; avoid overtightening
• If other fasteners or parts are damaged, replace them to ensure a secure repair

This louver link connects and moves the louver/damper assembly to direct air flow. It restores proper louver movement so vents open and close smoothly for consistent airflow or exhaust performance. What it does

• Transfers motion from the actuator/motor to the louver/damper for opening and closing
• Helps restore normal venting when louvers stick, bind, or fail to move
• Prevents uneven airflow caused by a broken or disconnected link
• Works as the mechanical connection in louver/damper assemblies on compatible units

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle plastic tabs and pivots gently to avoid breakage during removal/installation
• Basic hand tools may be required;

This louver holder secures a refrigerator/freezer vent louver, keeping the air grille aligned for proper airflow and a finished appearance. It replaces a broken or missing retainer so the vent stays in place and the louver operates smoothly. What it does

• Holds the vent/louver in the appliance cabinet or grille so it doesn't fall out or rattle
• Restores proper alignment of the vent for unobstructed airflow
• Stops noise caused by a loose or broken louver mount
• Helps maintain the appliance's finished look by securing trim and grille pieces

• One louver holder (single mounting retainer) as shown

• Remove power to the appliance before any service when working near electrical components
• Usually installs by snapping or fastening into the louver/grille area; inspect for broken clips or fasteners
• If screws or clips are corroded or missing, replace them with OEM-specified hardware

A compressor mounting gasket that creates a sealed, vibration-damping interface between the compressor and the refrigerator chassis. Replaces a worn gasket to help maintain proper compressor seating and reduce vibration transfer. What it does:

• Cushions and isolates the compressor to reduce noise and vibration
• Seals the compressor base to limit oil migration and debris entry
• Helps maintain alignment and stable mounting after compressor service
• Commonly replaced when removing or installing a compressor

• Disconnect power to the appliance before service; follow all safety procedures
• Inspect mounting surfaces for damage or debris; replace gasket if compressed, torn, or hardened
• Ensure proper compressor alignment and secure fasteners to OEM torque specs

This capacitor clamp is a small metal bracket that secures a refrigerator or appliance capacitor to the cabinet, helping keep the capacitor stable and preventing movement or vibration during operation. It preserves reliable electrical connections and reduces noise from loose components. What it does

• Holds the capacitor firmly in place to prevent shifting and rattling
• Helps maintain stable capacitor connections to avoid intermittent motor or control issues
• Reduces vibration-related noise from the capacitor area
• Protects the capacitor from contact with other components that could cause wear or damage

• One capacitor clamp/mounting bracket

• Disconnect power before accessing electrical components
• Inspect the clamp for cracks, corrosion, or missing fasteners and replace if damaged
• Retain original mounting hardware when possible; use compatible screws or bolts if replacements are needed