Cye22tp2mbs1 Parts

Right-hand bracket slide that secures and guides the freezer drawer assembly. Replace if broken, cracked, or worn to restore proper drawer alignment.

Refrigerator not cooling or compressor overheating? This compressor discharge tube jumper connects refrigerant lines. Moderate DIY repair for most models.

This 8-18 x 3/4 machine screw fastens appliance panels and small brackets to keep components secure and stable. It's a direct-fit replacement screw used where the original hardware has stripped, broken, or gone missing. What it does:

• Secures access panels, mounting brackets, and small assemblies
• Restores proper alignment and reduces rattling or vibration
• Replaces stripped or damaged fasteners
• Keeps wiring and components held in place for safe operation

• Unplug the appliance or disconnect power before starting work
• Use the correct driver and size to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to parts
• Replace corroded or damaged fasteners for best results

Reduces refrigerator vibration noise by damping component and panel contact. Replace deteriorated mastic to eliminate rattles and buzzing. Confirm fit.

Rubber grommet that cushions and protects refrigerant or water tubing where it passes through sheet metal. Replace if cracked, worn, or missing.

This center track guides and supports the fresh-food door drawer, helping the drawer slide smoothly and stay aligned for reliable access and seal. Replaces a worn or damaged center track to restore normal movement and alignment. What it does:

• Provides a stable sliding surface for the fresh-food drawer/door
• Restores smooth opening and closing when original track is worn or cracked
• Helps maintain proper door alignment to reduce gaps that can affect cooling
• Common symptom: drawer sticks, jams, or tilts during operation

• One center track for the fresh-food drawer/door

• Turn off power to the appliance before beginning any service
• Access usually requires removing the drawer/door assembly and fasteners; keep hardware organized
• Inspect companion tracks and rollers; replace any worn pieces to ensure smooth operation

Secures the right freezer shelf slide so drawers glide smoothly. Replace if cracked, broken, or missing to restore proper support. Confirm fit with model.

Fix refrigerator not cooling or freezing issues with this freezer evaporator coil assembly. Includes defrost heater. Moderate DIY repair, 1-2 hours.

This screw hinge center adjuster is a replacement hinge screw that helps align and secure the appliance door for smooth opening and a proper seal. Designed to restore correct door positioning and prevent sagging or uneven gaps. What it does:

• Replaces the center hinge screw/adjuster used in the door hinge assembly
• Helps realign the door to correct sagging, uneven gaps, or misalignment
• Secures hinge parts to maintain stable door movement and a tight seal
• Compatible with common symptom: door rubbing, dragging, or not closing evenly

• One screw hinge center adjuster

• Basic hand tools required; support the door during removal and installation
• Follow manufacturer service manual steps for hinge removal and door alignment
• Keep fasteners snug but avoid over-tightening to prevent stripping
• Turn off power to powered doors/controls and work with care around edges

This is a replacement 8-18 x 1/2" flat-head slotted screw commonly used to secure appliance panels and components. It restores proper fastening and helps eliminate rattles, loose trim, or misaligned parts. What it does:

• Secures panels, brackets, and trim to restore proper fit
• Stops vibration-related noise caused by loose fasteners
• Replaces missing or stripped screws to prevent parts from shifting
• Works where a flat-head, slotted-drive #8 screw with 1/2" length is required

• One 8-18 x 1/2" flat-head slotted screw

• Use the correct size slotted screwdriver to avoid cam-out or head damage
• Tighten until snug; avoid over-torquing which can strip threads or deform panels
• Replace any stripped mating hardware for secure fastening
• Disconnect power before doing repairs on appliances where required for safety

This wheel overmold assembly replaces a worn front wheel to restore smooth drum rotation and reduce noise. It mounts to the dryer front support to help the drum roll evenly and prevent metal-on-metal wear. What it does:

• Provides a cushioned wheel surface that supports the dryer drum and improves rotation
• Reduces squeaking, scraping and grinding caused by a worn or damaged front wheel
• Helps maintain proper drum alignment for even tumbling and reduced wear on seals
• Extends the life of the front support by preventing direct metal contact

• Disconnect power before beginning repair to avoid electrical hazard
• Access the front support assembly per your dryer's service instructions; inspect adjacent rollers and glides for wear
• Fit the overmold onto the wheel hub and secure per OEM guidance; verify smooth drum rotation before reassembly
• If other support components show wear, replace them to prevent premature failure

This is a replacement Café hot water display assembly that restores the dispenser/control panel display for hot water settings, keeping the dispenser readable and functional. Fits white slate trim and matches original appearance. What it does:

• Shows hot water settings and status on the dispenser/control panel
• Restores display clarity when numbers or icons are dim, missing, or unresponsive
• Replaces cracked, faded, or cosmetically damaged display lens
• Helps the dispenser communicate ready/temperature indications used during dispensing

• 1 hot water display assembly (white slate)

• High-level replacement only; verify power is disconnected before starting
• Handle the display carefully to avoid scratching the lens or damaging connectors
• May require removing the dispenser/control housing; keep track of screws and fasteners

Blank screen or unresponsive controls? This LCD display board restores your refrigerator's touchscreen and settings panel. Moderate DIY repair.

The Door Light Switch is an OEM part for GE refrigerators. It is designed to control the interior light of the refrigerator, turning it on when the door is opened and off when the door is closed.

Causes of a bad door light switch can include wear and tear over time, electrical malfunctions, or physical damage from regular use. A faulty switch can lead to improper functioning of the refrigerator light, impacting visibility inside the unit.

Symptoms of a bad Door Light Switch include:

• Refrigerator light not turning on or off correctly
• Light flickering or remaining dim
• Light staying on even when the door is closed

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Cover Latch is an OEM part for GE refrigerators. This part serves as a cover for the latch handle, ensuring a seamless look for the appliance while protecting the latch handle from damage and wear.

Causes of a bad Cover Latch can include wear and tear over time, impact or mishandling that leads to cracks or breaks, or general deterioration due to prolonged use.  

Symptoms of a bad Cover Latch include:

• Visible cracks or breaks
• The latch handle not being properly covered
• Difficulty in operating the latch handle
• Loose or missing cover latch

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Fix a broken or missing freezer drawer basket. Includes glide rails for smooth sliding. Easy DIY installation—just slide into place. Fits GE models.