Dacor Ecps2305 Double Oven Parts

This temperature sensor kit replaces a failed refrigerator temperature sensor to restore accurate temperature monitoring and help the control board maintain proper cooling. It's designed for service replacement and OEM fit. What it does:

• Monitors internal compartment temperature so the refrigerator control can regulate cooling cycles.
• Helps prevent overcooling or warming caused by a faulty or open sensor.
• Common symptom fix: refrigerator/freezer running too warm or too cold, or erratic cycling.
• Clears temperature-related error codes when installed in place of a defective sensor.

• Disconnect power to the appliance before starting any repair.
• Handle sensor tip and wiring gently; avoid sharp bends or pinching the harness.
• Route and secure the sensor wiring per OEM locations to ensure correct readings.

This convection element kit replaces the oven's convection heating element to restore even heat for baking and roasting. Use it when the convection system no longer produces consistent hot air or the oven bakes unevenly. What it does:

• Heats air for the oven's convection cooking mode so the fan can circulate consistent temperature.
• Restores even browning and predictable bake/roast results when the convection element has failed.
• Common symptom indicator: uneven baking or roasting, or visible damage to the element.
• Can be part of repairs when the oven does not reach expected results in convection mode.

• Disconnect power at the breaker before starting any repair — electric shock hazard.
• Access typically requires removing the oven cavity back panel or inner rear panel; use proper tools and follow OEM instructions.
• Inspect wiring terminals and insulation; replace connectors that are corroded or damaged.

This thermal cut-off switch is a high-temperature safety device that interrupts power if the appliance overheats. Replacing a failed cutout restores proper overheat protection and can help address no-heat or shutdown issues caused by an open safety circuit.

• Monitors temperature at its mounting location and opens the circuit if temperatures exceed a safe limit
• A failed/open cutout can cause no heat, intermittent heating, or the unit shutting off during use
• Helps protect components from damage due to overheating
• Location varies by model; typically mounted to a bracket or surface near a heat source

• Disconnect power at the breaker or unplug the appliance before servicing
• Note wire orientation and transfer leads one at a time to the new switch
• Mount in the original position with firm, flush contact for accurate temperature sensing
• After replacement, inspect airflow/venting and nearby fans/filters to address any underlying overheating causes

This convection oven motor drives the oven's convection fan to circulate hot air for even cooking. Designed as a direct replacement service motor to restore proper airflow and heating performance in compatible Samsung ovens. What it does:

• Spins the convection fan to circulate hot air for more even baking and roasting
• Helps maintain consistent oven temperature by improving air circulation
• Can address symptoms like uneven cooking, hot spots, or a noisy/non-spinning convection fan
• Matches OEM form and mounting for a straightforward replacement when compatible

• One convection oven service motor

• Disconnect power to the appliance before starting any repair
• Handle with care; verify connector and mounting orientation before final assembly
• Wear gloves and eye protection; avoid contact with sharp sheet metal and heating elements

This broil element heats the top of the oven for broiling and browning, restoring high-heat performance for searing and finishing dishes. Designed to replace a failed or damaged upper heating element. What it does

• Heats from the top of the oven to brown, sear, and broil foods
• Replaces a visibly burnt, broken, or non-heating upper oven element
• Helps fix symptoms such as no broil heat, uneven browning, or visible arcing/sparking
• Works with standard terminal connections used on compatible Samsung ranges

• One broil element (upper oven)

• Disconnect power to the appliance before attempting any service
• Handle element carefully to avoid bending or damaging the tubular element
• Verify terminal connections match your oven and tighten hardware securely

This replacement oven rack restores a stable cooking surface for slide-in and built-in ranges, letting cookware sit level for even baking and broiling. Durable wire construction resists warping under normal oven temperatures. What it does:

• Replaces a bent, warped or missing oven rack to restore safe, even cooking
• Provides a stable platform for pans, baking sheets and cookware
• Slides in and out on factory rack supports for easy access to food
• Resists heat exposure and typical wear from regular use

• No special tools required; rack slides into existing oven supports
• Ensure oven is completely cool before installing or handling
• If rack does not seat properly, support rails are undamaged and aligned
• Follow oven manufacturer's safety warnings and disconnect power if servicing nearby components

This service bushing protects and cushions appliance wiring where it passes through metal panels, helping prevent chafing and shorts. It's a simple replacement that restores proper routing and insulation for harness wires. What it does:

• Cushions wiring at panel openings to reduce abrasion and wear
• Keeps wiring properly routed to prevent pinching or intermittent connections
• Helps stop rattling or vibration where wires contact metal edges
• Addresses symptoms like exposed or frayed insulation, burning smell, or intermittent power related to damaged panel wiring

• One service bushing

• Disconnect power before starting any repair
• Remove the access panel or trim to reach the damaged bushing location
• Press the bushing into the panel hole until fully seated; replace wiring through the bushing as routed originally
• Inspect surrounding wiring and replace any frayed or heat-damaged sections; reassemble panels securely

The Gas Line Trimmer Cover Plate Light is essential for maintaining the functionality and appearance of your gas line trimmer. This genuine OEM part ensures a perfect fit, seamlessly integrating with your trimmer to provide reliable protection and illumination. Crafted from durable materials, the cover plate light safeguards critical components from dust and debris while enhancing visibility during operation. Installing the Gas Line Trimmer Cover Plate Light is straightforward, allowing you to quickly restore your trimmer to optimal performance. This genuine OEM part is specifically designed for Samsung gas line trimmers, ensuring compatibility and longevity. By choosing this cover plate light, you guarantee that your appliance operates efficiently and safely. Whether you need to replace a damaged cover or upgrade your existing setup, the Gas Line Trimmer Cover Plate Light is the perfect solution to enhance your trimmerGÇÖs durability and functionality.

The Thermocord Windowpack for Lawn & Garden Engines is an essential replacement part designed to maintain the efficiency and performance of your engine. Crafted as a genuine OEM part, this windowpack ensures a perfect fit and reliable functionality for your Samsung lawn and garden equipment. Its high-quality materials provide durable protection against wear and tear, helping to extend the life of your engine components. Installing the Thermocord Windowpack is straightforward, allowing you to quickly restore your equipment to optimal working condition without the need for professional assistance. By choosing this genuine OEM part, you can be confident in the compatibility and performance, ensuring your lawn and garden engine operates smoothly and efficiently. Whether you're repairing a damaged windowpack or upgrading your existing setup, the Thermocord Windowpack offers the quality and dependability you need for a seamless repair experience. Enhance your engine's reliability and maintain its peak performance with this trusted replacement part.

The Upright Vacuum Self-Clean Indicator Nameplate is essential for maintaining the optimal performance of your Samsung upright vacuum. This genuine OEM part ensures that the self-clean indicator functions accurately, allowing you to monitor when your vacuum requires maintenance. Designed specifically for Samsung upright vacuum models, it offers seamless compatibility and easy installation, helping you keep your appliance running smoothly without any hassle. The durable construction of the Self-Clean Indicator Nameplate guarantees long-lasting performance, providing reliable feedback on your vacuumGÇÖs self-cleaning status. By replacing a damaged or malfunctioning nameplate with this genuine OEM part, you enhance the reliability of your vacuum and extend its lifespan. Whether your original indicator is cracked, missing, or no longer responsive, the Upright Vacuum Self-Clean Indicator Nameplate is the perfect solution to restore your vacuumGÇÖs seamless operation. Enjoy a consistent and efficient cleaning experience by choosing this high-quality, genuine OEM part for your Samsung upright vacuum.