Dwhd64cp/22 Parts

This adjuster socket is the replacement socket used with a cabinet/appliance leveling foot to adjust and stabilize the unit. It lets you raise or lower the appliance for a level installation and steadier operation. What it does:

• Engages the appliance leveling foot so you can turn and set the height
• Restores proper leveling to reduce rocking, uneven doors, and drainage issues
• Provides a secure interface between the leg and adjustment tool or nut
• Durable replacement for worn or damaged socket components

• One adjuster socket

• Turn power off and unplug the appliance before accessing leveling components
• Access may require tipping or partially removing the front grill or toe panel per your model's service manual
• Verify correct socket orientation and thread engagement before lowering appliance back to floor

This plunger is a small push-style actuator that transfers motion between linked components, restoring proper mechanical engagement for the related mechanism. It's a direct-fit replacement designed to return a lever or latch to its resting position. What it does:

• Acts as the push/pull actuator in a latch, dispenser or control assembly to transmit motion
• Helps the related mechanism engage, release, or return smoothly when working correctly
• Common symptom: lever or latch fails to engage, stick, or does not return to home position
• Prevents intermittent operation caused by a worn or broken push rod

• One plunger

• Disconnect power before beginning any repair to avoid electrical or mechanical hazards
• Access may require removal of trim or housing panels; keep small parts organized
• Inspect mating pivot points and bushings for wear; replace if excessively worn

This M6 x 26 screw secures the dishwasher door tension/adjusting assembly so the door opens and closes smoothly. Replacement helps restore proper door alignment and reduces sagging, rattling, or uneven closing. What it does:

• Fastens the door tension/adjusting mechanism to the door assembly
• Maintains correct tension so the door stays level during use
• Helps stop door sag, uneven closing, or vibration noises related to a loose fastener

• Disconnect power and water supply before beginning any repair
• Use the correct M6 driver/socket and avoid stripping the head
• Thread the screw in straight and tighten until secure; do not overtighten

This insulating part is a small thermal insulator used to reduce heat transfer and protect nearby components in the appliance. It helps maintain proper internal temperatures and limits heat-related wear on surrounding parts. What it does

• Provides thermal separation between hot components and adjacent panels or wiring
• Helps reduce heat-related failure of nearby parts by slowing heat transfer
• Can reduce localized hot spots that cause odor or premature component wear
• Can help dampen minor vibration noise when fitted correctly

• Disconnect power to the appliance before accessing internal panels
• Remove outer panels or components as needed to reach the old insulating piece
• Handle gently; insulation materials can be fragile or have adhesive backing
• Reassemble panels securely and verify normal operation after installation

This cotton insulation piece provides noise- and heat-damping for the appliance cabinet area, helping reduce operating sound and limiting heat transfer around the tub. Designed to replace worn or damaged insulation for a snug fit and quieter operation. What it does:

• Reduces operating noise by adding a sound-dampening layer around the tub area
• Helps limit heat transfer from the heater/tub to surrounding panels
• Provides a protective barrier to reduce vibration-related noise
• Restores the original insulation barrier when the old material is compressed or torn

• One cotton insulation panel, white, 46 dB variant

• Disconnect power and water supply before beginning any service
• Handle the insulation gently to avoid tearing; wear gloves and a dust mask if needed
• Remove access panels and old insulation, then position and secure the new piece in the same orientation
• Reinstall panels and restore power; test for proper operation and reduced noise

This installation set provides the mounting hardware needed to secure and finish appliance installation, helping ensure a stable fit and clean appearance. Ideal for use during initial installation or when replacing damaged fasteners. What it does:

• Provides necessary mounting hardware and brackets to secure the appliance in its cabinet or enclosure
• Helps maintain proper alignment and prevents movement or vibration during operation
• Supports safe routing and attachment of panels or trim for a finished look
• Addresses loose or missing mounting components that can cause rattle or poor fit

• Follow the appliance installation instructions and local codes; turn off power and water before beginning
• Use proper tools and fasteners for your cabinet and countertop material
• Tighten hardware snugly but avoid over-torquing which can strip threads or damage parts

This shaped handle cap covers and finishes the end of a compatible appliance handle, restoring a clean appearance and helping protect the handle edge from wear. Fits as a direct replacement for a worn, cracked, or missing end cap. What it does:

• Covers the exposed end of the handle for a finished, factory look
• Protects the handle end from chips, scratches, and snagging
• Helps keep the handle grip comfortable and secure
• Restores cosmetic appearance after impact or wear

• Installer tip: this cap typically snaps or slides into place; remove any broken pieces before installing
• Use a plastic trim tool or gloved hand to avoid scratching surrounding surfaces
• Do not force excessively; if the cap does not seat easily, inspect the handle for damage or mounting clips

A shaped handle cap that restores a finished look and covers exposed fasteners on the appliance handle. Keeps the handle trim looking clean and prevents dirt buildup in the screw area. What it does:

• Covers and protects handle mounting hardware for a neater appearance
• Helps keep dirt and grime out of the handle screw area
• Replaces missing, cracked, or worn decorative end caps
• Fits over the handle end and snaps into place for a finished look

• Typically snaps or slides onto the handle end; align before pressing fully into place
• No special tools usually required; a small flat tool can help with removal if stuck
• Inspect surrounding trim for damage before installing replacement
• Disconnect power to the appliance or follow manufacturer safety guidance when working near electrical components

This spindle is the rotating shaft that transfers motion between the motor/gearbox and the appliance's moving components, restoring proper rotation and alignment for reliable operation. Fits as a direct replacement when the original spindle is worn or broken. What it does:

• Connects and transmits rotational force from the drive assembly to the appliance's moving part
• Maintains alignment and smooth rotation for consistent performance
• Can stop wobble or intermittent movement caused by a bent or damaged shaft
• Helps restore normal operation if the original spindle is cracked, worn, or seized

• Intended for users comfortable with appliance repair; unplug appliance and shut off water before starting
• Inspect related seals, bearings, and mounting hardware; replace if damaged
• Use correct tools and torque per manufacturer guidance; avoid forcing components to prevent damage

This trim strip finishes and protects the exposed edge of the appliance where it installs, helping secure adjacent panels and giving a clean, finished look. Replacing a damaged strip can improve fit and appearance.

• Provides a finished edge and helps secure panels or covers in place
• Helps prevent gaps that can collect debris
• Common fix when the existing strip is cracked, bent, loose, or missing
• Reduce rattles or vibrations caused by an ill-fitting trim piece

• Disconnect power and shut off any utilities before servicing
• Note orientation/position of the old strip before removal
• Press or fasten the new strip into the same mounting points; do not force
• After installation, recheck clearances and panel alignment