Dwhd64cp/22 Parts

This electrical control switch completes or interrupts the power circuit that runs a specific appliance function, restoring on/off control for responsive operation and safer use. What it does:

• Acts as the user-activated or circuit-activated on/off control for a discrete function
• Restores power flow when the switch is made, allowing the associated component or cycle to run
• Common symptom: appliance function won't start or respond when the control is pressed or activated
• Common symptom: intermittent operation or no power to a given feature

• One switch

• Disconnect power to the appliance before attempting any service to prevent shock
• Access and replacement steps vary by model; follow the appliance service manual or schematic for safe disassembly
• Handle connectors carefully and confirm secure wiring/terminal seating after installation

This spray arm is the rotating water distributor that delivers pressurized spray to clean dishes in compatible Bosch dishwashers. Replacing a damaged or clogged spray arm restores proper water coverage and cleaning performance. What it does:

• Spins and disperses wash water across the lower/middle rack to remove food and soils
• Helps maintain even water distribution for consistent cleaning results
• Can reduce spotting and missed-soil areas when functioning correctly
• Common symptom: noisy operation, poor spray coverage, or visible cracks/blocked jets

• One spray arm

• Turn off power and water supply before starting any repair
• Inspect mounting hub and seals; replace damaged clips or gaskets as needed
• Remove items from dishwasher racks for easier access; follow OEM instructions for removal and reinstallation
• If jets are clogged, clean before reinstalling to prevent reoccurrence

The Tube Dishwasher is an OEM component for Bosch dishwashers. It is responsible for circulating water throughout critical spray arms during different cycles. 

Causes of a bad tube dishwasher can include mineral buildup reducing the tube diameter over time, physical damage from scraping dishware against the pipes, or wear from normal vibration/motion.

Symptoms of a bad tube dishwasher include:

• Incomplete spray coverage in hard-to-reach areas  
• Soft or spotty cleaning performance in certain sections
• Puddles or leaks at the tube installation points
• Dirty or stagnant water unable to circulate properly

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Thread Bolt is an OEM part for Bosch dishwashers. It serves as a fastening component, securing the water inlet in place and ensuring a proper water supply connection.

Causes of a malfunctioning Thread Bolt can include cross-threading or over-tightening during installation, leading to stripping or damage.  

Symptoms of a bad Thread Bolt include:

• Leaks around the water inlet area Loose or rattling water inlet valve 
• Difficulty in accessing or removing the valve assembly 

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

The Funnel is an OEM part for Bosch dishwashers. It helps accurately guide water from the inlet valve onto wash arms and other components inside the dishwasher.

As water flows through the funnel during each cycle, small debris particles can become trapped. Over time, a buildup of mineral deposits or grime occurs inside the funnel.

Causes are normal mineral accumulation from hard water, along with food particles or grit trapped during dishwasher use.

Symptoms of a bad funnel include:

• Reduced or uneven water pressure to spray arms
• Clogs or blockages that hamper water flow
• Mineral deposits visible inside the funnel

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This inner door panel replaces a damaged or worn dishwasher door interior to restore proper door fit and help prevent leaks and rattling. It fits behind the outer door and supports the latch and internal components. What it does

• Forms the interior surface of the dishwasher door and helps keep water inside the tub
• Supports latch, insulation, and any door-mounted components
• Restores proper door alignment and reduces noise from a loose or dented door
• Commonly replaced when the door is dented, cracked, or showing signs of water intrusion

• One inner door panel

• Disconnect power (and water, if applicable) before starting; follow all safety precautions
• Removing the outer door panel and handling any attached wiring or insulation may be required
• Handle edges and any glass with care to avoid cuts or breakage

This replacement tube connects and directs fluid or air between system components to restore proper routing and prevent leaks or malfunctions. It's a direct-fit service part when the original tube is cracked, clogged, or damaged. What it does

• Channels water or airflow between internal components to maintain normal operation.
• Restores proper routing when the original tube is cracked, split, or collapsed.
• Helps stop visible leaks or pooling under the appliance associated with a failed tube.
• Reduces risk of related component damage caused by diverted fluids.

• One replacement tube.

• Disconnect power and turn off the water supply before starting any repair.
• Verify correct orientation and seating; secure with factory clamps or hose clamps as required.
• Inspect adjacent connections and replace any worn seals or clamps to ensure a leak-free installation.
• After installation, restore power/water and run a short cycle to check for leaks.

This sump clamp secures the dishwasher sump/drain assembly to the tub, keeping the seal and pump assembly held in place to prevent leaks and movement. It's a small but essential fastener for a watertight sump connection. What it does:

• Holds the sump/drain housing tightly against the tub to maintain a proper seal
• Prevents the sump assembly from shifting during operation, which can cause leaks or noise
• Helps stop water from leaking under the machine when the pump runs
• Supports proper alignment of the drain/pump components for reliable draining

• One sump clamp

• Disconnect power and water supply before starting any repair
• Access the sump area by removing the lower access panel or toe kick and tilting the machine as needed
• Inspect the sump seal/gasket and replace if cracked or damaged when replacing the clamp
• Tighten clip until secure but avoid forcing or deforming the sump housing; test for leaks after reassembly

This water softener cartridge helps reduce hard-water minerals in dishwasher cycles to limit spotting and buildup for clearer glassware and cleaner dishes. Fits into the dishwasher's water-treatment area to help maintain wash performance. What it does:

• Uses ion-exchange media to reduce hardness that causes spotting and cloudy glass
• Helps prevent mineral deposits on heating elements and interior surfaces
• Improves detergent effectiveness for better cleaning and rinsing
• Common symptom: persistent spots or white film on dishes and glasses

• High-level replacement: disconnect power and water supply before servicing
• Access requires removing the dishwasher's outer tub/top panels per service manual
• Handle cartridge and internal parts carefully to avoid damaging seals or gaskets

This shaft for the float switch is the replacement shaft that secures and guides the dishwasher float to accurately detect water level, helping the appliance fill and shut off properly. Direct-fit design replaces the worn or broken float shaft. What it does

• Guides the float so the level-sensing switch can detect low or high water levels.
• Prevents overfilling by ensuring the float actuates the water-level switch reliably.
• Commonly replaces a cracked, bent or missing shaft that causes inconsistent fill, continuous filling, or water-level errors.

• One replacement float switch shaft.

• Disconnect power to the appliance before starting any repair.
• Remove the access panels and float assembly per your model's service instructions to reach the shaft.
• Inspect the float and switch for damage; replace only the failed components as needed.
• Reassemble carefully and test fill/stop operation before returning the appliance to service.

This temperature sensor (thermistor) measures appliance temperature and sends a signal to the control board so the unit can maintain proper cooling cycles. Replaces a failed or intermittent sensor for more reliable temperature control. What it does:

• Detects internal temperature and provides a changing resistance signal to the control board
• Helps the control board regulate compressor and fan operation for consistent cooling
• Commonly linked to symptoms like incorrect temperatures, frequent cycling, or related error codes
• Works as a direct-replacement sensing element

• One temperature sensor (thermistor) as pictured

• Disconnect power before servicing to avoid shock or damage
• Handle the sensor and wiring gently; avoid kinking or pinching the harness
• Access may require removing interior panels or covers; keep mounting hardware for reinstallation
• Test with a multimeter or follow OEM service instructions before replacement

This holder secures a small appliance component in place to prevent movement and reduce noise and wear. It restores proper fit and helps keep connected lines and parts aligned for reliable operation. What it does

• Secures a hose, wire, or small assembly to the appliance frame to prevent rubbing or sagging
• Keeps components aligned to reduce vibration and rattling noises
• Helps maintain proper routing to avoid strain on connections
• Commonly replaced when loose, broken, or missing and causing movement or noise

• One holder

• Turn off power and, if applicable, water supply before starting work
• Inspect surrounding clips and fasteners; replace if damaged
• Install in the same orientation as the original; use proper fasteners if required

This replacement screw fastens appliance panels and components to keep assemblies secure and stable. It restores proper fit where a missing or stripped screw causes loose panels, rattling, or misaligned parts. What it does

• Secures panels, brackets, or internal components to prevent movement and noise
• Replaces lost, stripped, or corroded fasteners that allow vibration or gaps
• Helps maintain proper alignment of doors, access panels, and mounting brackets
• Small hardware solution used where original mounting screws have failed

• Turn off and unplug the appliance before accessing internal parts
• Use the proper screwdriver or bit to avoid stripping the head
• Do not overtighten; snug to manufacturer torque recommendations if available
• If threads are damaged, replace the mating nut or insert as needed