Efl-201 Parts

The Housing is an OEM part for Frigidaire washers. It holds the dispenser cup securely in place and ensures proper functioning of the detergent and fabric softener dispensing system.

This housing is specifically designed to fit within your Frigidaire washer, providing stability and support to the dispenser cup. It helps prevent leaks and ensures that the detergent and fabric softener are dispensed accurately during the wash cycle.

A bad housing can be caused by wear and tear, damage, or improper installation. Signs of a faulty lower housing include leaks, loose dispenser cup, or improper dispensing of detergent or fabric softener.

Symptoms of a bad housing include:

• Leaks or drips from the dispenser
• Loose or wobbly dispenser
• Improper dispensing of detergent 

Replace your defective or damaged housing with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Adjustable leveling leg for washers. Securely holds machine in place while allowing height adjustment on uneven floors. Replace if stripped or seized.

Replacement door frame for front-load washers. Installs around the door opening to secure the seal and provide structural support. Order when cracked or damaged.

Fix a washer that won't drain or leaves standing water. This drain pump forces wastewater out during cycles. Test for 120V power before replacing.

Replacement mounting screw that secures panels, brackets or small components in compatible appliances. Installs quickly to replace stripped or missing fasteners and help stop rattling and restore proper alignment. What it does:

• Fastens panels, trim pieces, brackets and other small assemblies to the appliance.
• Replaces stripped, corroded or broken screws that can cause loose parts or vibration noise.
• Helps restore proper alignment of doors, drawers or trim when a missing screw allows movement.
• Small appliance fastener sized for original mounting points—use the OEM screw whenever possible.

• Disconnect power and water before starting any repair.
• Start the screw by hand to avoid cross-threading; use the correct screwdriver or bit.
• Tighten snugly but avoid overtightening to prevent stripped threads or damaged plastic.

Replacement door handle for front-load washers. Installs on the door exterior to provide a secure grip for opening and closing. Order when cracked or broken.

This electronic control manages the oven's user interface, timers and heating functions to restore normal temperature and timing behavior. Use it when the control board fails to respond or the display and timers act erratically. What it does:

• Regulates oven bake/broil cycles and overall temperature control signals
• Powers and displays the clock, timer and front-panel readouts
• Processes inputs from the touchpad/controls to select cooking modes and start/stop cycles
• Common symptoms: blank or flickering display, unresponsive touchpad, incorrect clock/timer, or oven not heating as expected

• Disconnect power at the breaker or unplug the appliance before servicing
• Handle the board by its edges and avoid static discharge; do not touch circuit traces or components
• Match connectors/mounting points to the original control before installation

Fix a washer that won't drain or leaves standing water with this drain pump assembly. Removes wastewater from the tub during the drain cycle.

Adjustable leveling leg threads into washer base to stabilize and level the cabinet. Replace worn, missing, or broken legs to prevent rocking and vibration.

This replacement cup funnels water to the ice maker fill tube and helps ensure proper water delivery for consistent ice production. It restores the fill path and prevents water from pooling where it can cause poor ice formation or leaks. What it does

• Directs water into the ice maker fill tube so molds receive the correct amount
• Helps prevent water from spilling into the ice bin or cabinet area
• Addresses symptoms like slow/weak ice production, water pooling under the ice maker, or visible leaks during a fill cycle
• Works with the ice maker assembly to maintain consistent ice size and formation

• One replacement ice-maker fill cup

• Disconnect power and shut off the water supply before servicing the ice maker
• Remove the ice maker or access panel per your model's service instructions to reach and replace the cup
• Handle plastic parts gently to avoid cracking; ensure a snug fit to prevent leaks
• If symptoms persist after replacement, check the fill valve and ice maker assembly for proper operation

If your washer overfills, underfills, or won't advance cycles, the pressure switch may have failed. This water level sensor uses air pressure sensing.

Fix error codes and non-responsive controls with a new washer control board. This circuit board manages all wash cycles and settings for your machine.

Washer door won't lock or stay closed? This door lock assembly secures your washer door during cycles, preventing accidental opening and ensuring proper operation.

This suspension spring supports the washer tub and helps stabilize the drum during spin cycles to reduce vibration and noise. Replaces a worn or broken tub spring to restore smoother operation. What it does

• Holds and stabilizes the inner tub assembly to limit excessive movement during spins
• Helps reduce vibration and rattling that can occur from a loose or broken spring
• Prevents tub misalignment that can cause rubbing or noise
• Works with the washer's suspension system to maintain proper spin balance

• One suspension (tub) spring as shown

• Disconnect power and water supply before starting any repairs
• Springs are under tension; use caution and proper tools to remove/install
• Inspect other suspension components (shocks/rods, mounts) and replace if worn

Mounting bracket secures components inside your laundry center. Replace if bent, broken, or missing to eliminate rattling and restore stability.

If clothes aren't tumbling properly or bunching up during wash cycles, the drum vane may be damaged. This part lifts and agitates laundry for cleaning.