Efl-201 Parts

Replace cracked or warped washer control panel trim. Restores finished appearance and protects internal switch assembly. Straightforward installation.

Secures the front panel to your washer frame. Replace this clip if your panel is loose, rattling, or won't stay in place due to a broken or missing clip.

Replace your washer's cracked or damaged control console to restore button function and front panel appearance. Moderate DIY repair in 30-60 minutes.

Washer won't power on or turn on? A faulty power cord with frayed wires or damaged plug may be the cause. Direct electrical connection replacement.

The Knob Assembly is an OEM part for Frigidaire washers. It consists of both the control board and knob for the user interface. 

A bad board and knob assembly can be caused by electrical issues, component failure, or physical damage. When the assembly becomes faulty, it can result in issues such as the washer not starting, improper cycle selection, or unresponsive controls.

Symptoms of a bad board and knob assembly include:

• Washer not turning on or responding to controls
• Inability to select or change wash cycles
• Error codes on the control panel

Replace your faulty board and knob assembly with this genuine OEM Frigidaire part to restore your washer. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

Fix a washer that won't start, cycle, or respond to controls with this main control board. Restores electronic operation and display function.

Secures interior trim and components in your laundry center to prevent rattling and shifting. Replace when worn or broken to restore a snug fit. Verify compatibility with your model number.

Mounting screw for washer cabinet and component assembly. Replace if screw is stripped, missing, or damaged during disassembly. Essential hardware piece.

Replacement mounting nut that secures panels, trim, and internal components. Needed when original nut is stripped, corroded, missing, or lost during repair.

This bushing protects the appliance service cord where it passes through the cabinet, reducing wear and preventing chafing that can expose wiring. It's a simple replacement that restores a safe cord entry point. What it does:

• Cushions and centers the service cord at the cabinet opening to prevent abrasion
• Helps keep the cord from rubbing on sharp metal edges that can cause insulation damage
• Reduces risk of shorting, sparking, or intermittent power caused by a worn cord
• Commonly replaced when the existing bushing is cracked, missing, or deformed

• One service cord bushing

• Disconnect power (unplug or switch off breaker) before servicing
• Inspect the cord and surrounding insulation; replace the cord if damage is found
• Push the bushing into the cabinet opening, then route the cord through the bushing until seated
• Reuse only if undamaged; do not force a damaged bushing into place

Secures and organizes wires inside your appliance. Replace if broken, loose, or missing to prevent wire damage. Verify fit with your model number.

The Bracket is an OEM part for Frigidaire washing machines. This bracket provides the necessary support and pivot point for the washer door to open and close smoothly. 

Causes of a bad bracket can include mechanical stress from constant use, accidental impacts that can bend or break the bracket, or corrosion due to exposure to moisture and detergent residues.

Symptoms of a bad bracket include:

• Difficulty opening or closing the washer door
• A door that hangs unevenly or seems loose
• Squeaking or other noises when the door is moved
• Visible wear or damage to the bracket

This OEM Frigidaire part is also compatible with Electrolux, Gibson, Kelvinator and some Kenmore models.

Control knob assembly for laundry center washers. Replacement needed when knob is cracked, broken, loose, or missing from repeated use or damage.

The washer front panel forms the outer cabinet exterior, housing the control panel and door. Replace if cracked, dented, warped, or damaged from impact.

This metal top panel replaces the upper rear control housing on compatible Frigidaire ranges and stoves, restoring a secure mounting surface for controls and improving cabinet fit and appearance. Ideal for repairing bent, rusted, or damaged panels. What it does

• Replaces the upper rear housing that supports control knobs, switches and the backguard area
• Restores proper alignment and spacing between the cooktop and rear controls
• Stops light leaks and relieves stress from warped or bent panels
• Commonly used when the panel is dented, rusted, cracked, or has broken mounting tabs

• One top panel

• Disconnect power (and gas, if applicable) before starting any work
• Handle sharp sheet-metal edges with gloves; panel edges can be sharp
• Remove control knobs, backguard, or trim as required and save screws for reinstallation
• Align mounting tabs and secure with original hardware; test controls after reassembly

If your washer won't start, displays error codes, or cycles won't advance, the main control board may have failed. This repair requires intermediate skills.