Fcrg306lafd Parts

This hot surface igniter is the heated element that lights the bake burner in gas ovens. It provides a reliable glow to ignite gas so the oven can reach and maintain baking temperatures. What it does

• Heats and glows to ignite the oven's bake burner when the control calls for heat.
• Restores normal oven heating when a failed igniter prevents the burner from lighting.
• Common symptoms: oven won't heat, long preheat times, or bake burner not lighting.
• Works with compatible gas oven systems that use a hot surface ignition method.

• One hot surface igniter assembly (single igniter).

• Turn off power and shut off gas supply before beginning any repair.
• Handle the igniter carefully; the element is brittle and can crack if touched or dropped.
• Verify fit and wiring match your appliance before installation.

This replacement cover protects and finishes the dispenser housing, restoring a clean appearance and helping keep internal dispenser components shielded from spills and debris. It's a direct-fit exterior trim piece for the dispenser area. What it does:

• Covers and protects the dispenser housing and internal components from spills and debris
• Restores a finished appearance to the dispenser area after damage or wear
• Helps the dispenser door/actuator operate without interference from broken trim
• Commonly used when the dispenser trim is cracked, warped, or missing

• One dispenser housing cover

• Disconnect power to the appliance before beginning any work
• Remove dispenser trim screws or clips, note fastener locations for reassembly
• Handle plastic trim carefully to avoid cracking; align tabs and snap or screw cover into place
• Test dispenser functions after reinstalling power; do not force misaligned parts

This electronic control board replaces the main console control that manages oven functions and display, restoring reliable control and timed operations. It provides the user interface and sends signals to heating and safety systems. What it does:

• Receives inputs from front-panel buttons/knobs and controls oven bake/ broil cycles
• Manages timed functions, clock, and display readouts
• Sends on/off and mode signals to heating elements and relays
• Can resolve symptoms like unresponsive controls, blank or erratic display, or failure to start cooking cycles

• One electronic control board

• Disconnect power before starting — work only with the appliance unplugged or breaker off
• Handle the board by edges and avoid touching components; use anti-static precautions when possible
• Reconnect wiring exactly as removed and verify connector seating; label wires if needed before disconnecting

This is a replacement mounting nut used to secure components on compatible Frigidaire appliances. It provides a simple, reliable fastener to replace a missing, damaged, or corroded nut and restore proper part retention. What it does

• Secures panels, brackets, or hardware so parts stay in position during use
• Replaces stripped, rusted, or missing nuts that cause rattling or loose components
• Helps restore proper alignment and safe operation of the affected assembly
• Small fastener used wherever the OEM diagram specifies part 561231207

• One mounting nut (part number 561231207)

• Disconnect power or unplug the appliance before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten snugly but do not overtighten to prevent thread damage
• If the original nut was corroded, inspect mating threads and replace the bolt/stud if needed

This is a replacement mounting screw used to secure the dual safety valve assembly on compatible gas ranges and ovens. It restores proper fastening so the valve stays firmly in place during operation. What it does

• Secures the safety/dual gas valve to the appliance chassis or manifold
• Prevents valve movement that can interfere with burner operation or alignment
• Commonly replaced when original screw is missing, stripped, or damaged
• Matches OEM thread size and length for correct fit and retention

• One (1) screw, size 10-16 x 0.486

• Disconnect power and shut off gas supply before starting work; follow all safety procedures
• Thread carefully to avoid cross-threading; do not overtighten — snug to OEM torque specification
• Inspect surrounding mounting holes and hardware; replace any stripped or damaged parts for a secure fit

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This oven light button is the user-facing push button used to operate the oven light. It restores a damaged or missing control button so the light can be turned on and off easily. What it does:

• Acts as the push button for the oven light control assembly.
• Replaces cracked, worn, or missing oven light buttons that are hard to press or no longer stay in place.
• Helps restore normal user control of the oven interior light without replacing the entire switch assembly.
• Fits into the existing control panel opening and interfaces with the factory light switch mechanism.

• Turn off power to the appliance before attempting any repair to avoid shock—unplug or switch off the breaker.
• Remove control panel trim or bezel as required to access the button; retain all fasteners for reassembly.
• Inspect the underlying switch and wiring; replace the switch if the button does not resolve the issue.

This replacement screw secures appliance panels and small components to keep assemblies stable and aligned. Use it when a mounting fastener is missing, stripped, or damaged to restore proper fit and reduce vibration. What it does

• Fastens trim, panels, brackets, or internal components depending on application
• Helps eliminate loose parts, rattling, or misaligned panels
• Restores secure mounting after corrosion, wear, or a lost screw
• Matches OEM fit and thread form for compatible attachment points

• Turn off power to the appliance and unplug before servicing electrical appliances
• Use the correct driver size to avoid stripping the screw head
• Replace only like-for-like fasteners; if screw length or thread engagement is uncertain, confirm with the service manual or parts diagram
• Tighten until secure but avoid over-torquing which can strip threads or damage components

This replacement cabinet frame restores the appliance's front trim for a clean, finished appearance and proper panel alignment. It helps keep edges covered and maintains the door/cabinet fit. What it does:

• Provides the front trim/frame that supports and aligns the appliance cabinet or door panels
• Covers exposed edges for a finished look and helps reduce drafts or light gaps
• Helps eliminate rattling or misalignment caused by a damaged or warped frame
• Matches OEM fit to replace a cracked, bent, or cosmetically damaged frame

• Disconnect power (and water for appliances with water) before beginning any work
• Basic hand tools typically needed; retain all fasteners from the original part for reassembly
• Handle carefully to avoid scratching the finish; check fit before tightening fasteners

This lamp assembly replaces a refrigerator interior light to restore safe, visible illumination for food storage areas. It provides a direct-fit housing and socket that mounts where the original interior lamp was installed. What it does:

• Houses and secures the refrigerator interior light so the compartment stays illuminated.
• Provides the electrical connection and socket for the interior lamp bulb.
• Common fix for lights that flicker, fail to turn on, or have a loose or damaged housing.
• Helps restore normal visibility for loading, unloading, and inspecting contents.

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the lens and bulb carefully to avoid breakage; replace the bulb if damaged.
• Use basic hand tools; avoid forcing fasteners—align tabs and clips to seat the assembly.

This oven temperature sensor probe reads internal oven temperature so the range can maintain accurate cooking heat. Replaces a failed or inconsistent probe to restore proper temperature sensing and bake/ roast results. What it does

• Detects oven cavity temperature and sends the reading to the control board for temperature regulation
• Helps resolve symptoms like inaccurate oven temperature, burners cycling too often, or oven running hotter/colder than set
• Works as the control's feedback sensor; a faulty sensor can cause baking or broiling problems
• Passive probe design—no separate power source; relies on resistance changes with temperature

• One oven temperature sensor probe

• Turn off power to the appliance at the breaker before servicing to avoid electric shock
• Handle the probe and its wiring gently; avoid kinking the sensor element or nicking insulation
• Verify connector fit and routing before reassembly; secure sensor away from direct flame or heavy contact

This genuine replacement screw secures appliance panels and components to restore proper fit and stop loose parts. It's a simple hardware fix that helps eliminate rattles and ensures safe, reliable assembly. What it does:

• Secures trim, panels, brackets, or control assemblies to prevent movement and noise
• Replaces missing, stripped, or worn screws that cause loose or misaligned parts
• Restores proper fastening where a loose screw allowed vibration or rattling
• Helps maintain safe component position to reduce risk of damage

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• If threads are damaged, replace with the exact OEM part to ensure proper fit

This replacement cover protects internal components and restores your appliance's finished appearance. It fits the factory location to keep parts shielded from debris and accidental contact. What it does

• Replaces a cracked, broken or missing cover to stop exposed components and reduce risk of damage
• Helps prevent debris and moisture from entering internal areas that can cause malfunctions
• Eliminates rattles or vibration caused by a loose or damaged housing piece
• Restores a clean, finished look to the appliance exterior

• Disconnect power to the appliance before starting any repair
• Basic hand tools such as a screwdriver may be required; keep fasteners from the original part for reuse if in good condition
• Handle part carefully to avoid scratching the finished surface during installation