Fcrg3083ada Parts

This inner oven door glass panel replaces a cracked, chipped or cloudy oven door surface to restore visibility and help maintain proper heat containment. It fits behind the outer door glass and is designed for direct replacement. What it does:

• Replaces damaged or shattered inner oven door glass to restore safe operation and clear viewing
• Helps maintain the oven cavity seal when installed correctly
• Reduces heat loss through the door compared with a broken or missing panel
• Addresses symptoms like visible cracks, broken glass fragments, or reduced visibility into the oven

• Disconnect power to the appliance before starting and allow the oven to cool completely
• Handle the glass carefully; wear cut-resistant gloves and eye protection
• Installation typically requires door removal and partial disassembly—follow the manufacturer's service instructions
• If glass is broken, remove shards safely and dispose per local regulations

This replacement tube routes water to the ice maker or dispenser so your appliance can fill ice trays and dispense water reliably. It restores a sealed water path to prevent leaks and ensure proper filling. What it does

• Carries water from the supply or valve to the ice maker or dispenser
• Restores proper ice maker fill and water dispensing when a cracked or clogged tube is causing underfilling
• Helps stop leaks by replacing brittle, split, or deteriorated tubing
• Works with the appliance's existing fittings and clamps to maintain a sealed connection

• One replacement water tube

• Turn off the water supply and unplug the appliance before starting work
• Inspect fittings and clamps; reuse if undamaged or replace with equivalent clamps for a secure seal
• Confirm tube routing matches the original to avoid kinking or interference with moving parts

This hot surface igniter is the heated element that lights the bake burner in gas ovens. It provides a reliable glow to ignite gas so the oven can reach and maintain baking temperatures. What it does

• Heats and glows to ignite the oven's bake burner when the control calls for heat.
• Restores normal oven heating when a failed igniter prevents the burner from lighting.
• Common symptoms: oven won't heat, long preheat times, or bake burner not lighting.
• Works with compatible gas oven systems that use a hot surface ignition method.

• One hot surface igniter assembly (single igniter).

• Turn off power and shut off gas supply before beginning any repair.
• Handle the igniter carefully; the element is brittle and can crack if touched or dropped.
• Verify fit and wiring match your appliance before installation.

This replacement cover protects and finishes the dispenser housing, restoring a clean appearance and helping keep internal dispenser components shielded from spills and debris. It's a direct-fit exterior trim piece for the dispenser area. What it does:

• Covers and protects the dispenser housing and internal components from spills and debris
• Restores a finished appearance to the dispenser area after damage or wear
• Helps the dispenser door/actuator operate without interference from broken trim
• Commonly used when the dispenser trim is cracked, warped, or missing

• One dispenser housing cover

• Disconnect power to the appliance before beginning any work
• Remove dispenser trim screws or clips, note fastener locations for reassembly
• Handle plastic trim carefully to avoid cracking; align tabs and snap or screw cover into place
• Test dispenser functions after reinstalling power; do not force misaligned parts

This electronic control board replaces the main console control that manages oven functions and display, restoring reliable control and timed operations. It provides the user interface and sends signals to heating and safety systems. What it does:

• Receives inputs from front-panel buttons/knobs and controls oven bake/ broil cycles
• Manages timed functions, clock, and display readouts
• Sends on/off and mode signals to heating elements and relays
• Can resolve symptoms like unresponsive controls, blank or erratic display, or failure to start cooking cycles

• One electronic control board

• Disconnect power before starting — work only with the appliance unplugged or breaker off
• Handle the board by edges and avoid touching components; use anti-static precautions when possible
• Reconnect wiring exactly as removed and verify connector seating; label wires if needed before disconnecting

This is a replacement mounting nut used to secure components on compatible Frigidaire appliances. It provides a simple, reliable fastener to replace a missing, damaged, or corroded nut and restore proper part retention. What it does

• Secures panels, brackets, or hardware so parts stay in position during use
• Replaces stripped, rusted, or missing nuts that cause rattling or loose components
• Helps restore proper alignment and safe operation of the affected assembly
• Small fastener used wherever the OEM diagram specifies part 561231207

• One mounting nut (part number 561231207)

• Disconnect power or unplug the appliance before starting any repair
• Use the correct-size wrench or socket to avoid rounding the nut
• Tighten snugly but do not overtighten to prevent thread damage
• If the original nut was corroded, inspect mating threads and replace the bolt/stud if needed

This hex flange nut secures components where a broader bearing surface is needed to resist loosening and distribute load. It fits 10-32 threaded studs and is used on fastened assemblies in appliances. What it does:

• Provides a secure threaded connection for 10-32 screws and studs
• Flange spreads clamping force to reduce panel or bracket damage
• Hex shape allows tightening with a wrench for a reliable hold
• Commonly replaces worn or missing nuts that cause loose panels or rattling

• One hex flange nut

• Use the correct 10-32 screw or stud and hand-start threads to avoid cross-threading
• Tighten with an appropriately sized wrench; do not overtighten to prevent thread or part damage
• Disconnect power and follow appliance safety instructions before servicing
• Replace only like-for-like; confirm size and thread match your application

This replacement screw secures appliance panels and small components to keep assemblies stable and aligned. Use it when a mounting fastener is missing, stripped, or damaged to restore proper fit and reduce vibration. What it does

• Fastens trim, panels, brackets, or internal components depending on application
• Helps eliminate loose parts, rattling, or misaligned panels
• Restores secure mounting after corrosion, wear, or a lost screw
• Matches OEM fit and thread form for compatible attachment points

• Turn off power to the appliance and unplug before servicing electrical appliances
• Use the correct driver size to avoid stripping the screw head
• Replace only like-for-like fasteners; if screw length or thread engagement is uncertain, confirm with the service manual or parts diagram
• Tighten until secure but avoid over-torquing which can strip threads or damage components

This lamp assembly replaces a refrigerator interior light to restore safe, visible illumination for food storage areas. It provides a direct-fit housing and socket that mounts where the original interior lamp was installed. What it does:

• Houses and secures the refrigerator interior light so the compartment stays illuminated.
• Provides the electrical connection and socket for the interior lamp bulb.
• Common fix for lights that flicker, fail to turn on, or have a loose or damaged housing.
• Helps restore normal visibility for loading, unloading, and inspecting contents.

• Disconnect power to the appliance before starting any work to avoid shock.
• Handle the lens and bulb carefully to avoid breakage; replace the bulb if damaged.
• Use basic hand tools; avoid forcing fasteners—align tabs and clips to seat the assembly.

This genuine replacement screw secures appliance panels and components to restore proper fit and stop loose parts. It's a simple hardware fix that helps eliminate rattles and ensures safe, reliable assembly. What it does:

• Secures trim, panels, brackets, or control assemblies to prevent movement and noise
• Replaces missing, stripped, or worn screws that cause loose or misaligned parts
• Restores proper fastening where a loose screw allowed vibration or rattling
• Helps maintain safe component position to reduce risk of damage

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; do not overtighten to prevent thread or part damage
• If threads are damaged, replace with the exact OEM part to ensure proper fit

This replacement cover protects internal components and restores your appliance's finished appearance. It fits the factory location to keep parts shielded from debris and accidental contact. What it does

• Replaces a cracked, broken or missing cover to stop exposed components and reduce risk of damage
• Helps prevent debris and moisture from entering internal areas that can cause malfunctions
• Eliminates rattles or vibration caused by a loose or damaged housing piece
• Restores a clean, finished look to the appliance exterior

• Disconnect power to the appliance before starting any repair
• Basic hand tools such as a screwdriver may be required; keep fasteners from the original part for reuse if in good condition
• Handle part carefully to avoid scratching the finished surface during installation

The LP Conversion Kit with Instructions is an OEM replacement part for Frigidaire gas appliances. This kit is designed to convert a natural gas appliance to operate with liquid propane (LP) fuel. It includes all necessary components and instructions for a safe and effective conversion, ensuring optimal performance with propane.

Causes for needing an LP conversion kit typically include a change in the type of gas supply, such as moving to an area where propane is the primary fuel source. Proper installation is crucial to maintain safety and efficiency during operation.

Symptoms indicating the need for this kit include:

• The appliance is not functioning due to an incompatible gas type
• Incorrect or inconsistent burner flames
• Relocation to an area with propane-only gas service

This OEM replacement is also compatible with Electrolux, Gibson, Kelvinator, and Kenmore models.

This stainless 30-inch door handle restores a secure, comfortable grip and a clean, factory look to the door. Use it when the original handle is loose, cracked, missing, or cosmetically damaged.

• Replaces a damaged, wobbly, or missing door handle to restore normal opening and closing
• Addresses symptoms like a loose or rattling handle, flexing under pull, or visible wear
• Stainless finish matches the original appearance on compatible units
• Sized to the manufacturer's 30-inch configuration for proper fit

• Disconnect power and allow hot surfaces to cool before servicing
• Support the door; on some models, removing the door provides better access to handle screws
• Transfer any trim/end caps and reuse existing mounting screws per your model's instructions
• Tighten screws evenly; do not overtighten to avoid damaging the door skin or glass

This medium crown burner sits on the gas cooktop/range burner to shape and distribute the flame for even heating. Replacing a worn or damaged crown restores reliable ignition and a consistent flame pattern on the medium-output burner.

• Distributes gas evenly around the burner for steady, uniform heat
• Works with the igniter for reliable lighting when properly seated
• Helps protect burner ports from spills and debris
• Helps with uneven or yellow flames, delayed ignition, inconsistent lighting, or visible cracks/warping

• Disconnect power and shut off gas; allow the surface to cool completely
• Remove the old crown and clean the mating surfaces
• Align the new crown with any locator pins/notches and seat it flat; if screws are present on your model, tighten gently and evenly
• Restore gas/power and test for proper ignition and flame pattern