Fggh3047vdb Parts

Note: ONE screw only, order as needed.

This Door Trim Kit replaces the perimeter trim on the appliance door, restoring a clean, factory-finished look and secure fit of the door frame components. Use when the original trim is cracked, warped, missing, or discolored.

• Frames and protects the outer edge of the door while concealing fasteners for a finished appearance
• Helps maintain proper placement of door panels/liners where designed
• Common symptoms: cracked or missing trim, loose/rattling trim, visible gaps, or discoloration
• Replace when trim no longer stays attached or is damaged

• Disconnect power to the appliance before servicing; allow all surfaces to cool
• Open the door and note trim orientation; take a photo for reference
• Use non-marring tools and protective gloves to avoid scratching finishes or injury
• After installation, verify the door opens/closes smoothly and does not rub or bind

This small replacement spacer positions and secures appliance components to maintain correct alignment and fit. Installing the spacer restores proper panel spacing and reduces vibration where a worn or missing spacer causes looseness or rubbing. What it does:

• Maintains the correct gap between panels, trim, or assemblies to ensure parts fit flush
• Keeps components aligned to prevent rubbing, binding, or uneven wear
• Helps reduce vibration and rattling caused by a missing or damaged spacer
• Preserves original part spacing for reliable operation of the surrounding components

• Disconnect power to the appliance before any service to avoid shock or injury
• Remove any trim or fasteners that block access; keep track of screws and small parts
• Match the new spacer's orientation to the original; do not force parts into place

This cabinet insulation helps reduce heat transfer inside the refrigerator, supporting stable temperatures and efficient cooling. Replacing damaged or missing insulation can improve temperature control and reduce frost buildup. What it does:

• Fills gaps between the cabinet and liner to slow heat transfer and maintain internal cold
• Helps the appliance reach and hold set temperatures more consistently
• Reduces condensation and excess frost on interior surfaces
• Can improve compressor run-time and overall energy efficiency when intact

• Disconnect power before starting
• Remove food and shelving from the compartment before accessing the insulation
• Handle insulation carefully to avoid tearing; secure per manufacturer routing and adhesive points
• Dispose of old insulation per local regulations

This replacement control knob fits stove and oven front panels and restores reliable control of temperature and burner settings. It provides a secure, slip-resistant grip so you can turn settings with confidence. What it does

• Replaces a cracked, stripped, or missing control knob to restore user control
• Slides onto the control shaft for simple push-on operation
• Helps prevent accidental setting changes with a snug fit
• Visible index marker lets you clearly see selected settings

• One control knob

• Typically installs by pulling the old knob straight off the valve or shaft and pushing the new knob into place
• Disconnect power to the appliance or turn controls off before servicing for safety
• If the knob does not seat properly, do not force it—inspect the shaft for damage or debris

Size: 8-18ab x 0.5 inch.

The Control Panel is an OEM part for Frigidaire gas ranges. It is the area that allows you to control and adjust the various functions of your gas range.

A bad control panel can be caused by electrical issues, component failure, or physical damage. Signs of a faulty control panel include unresponsive buttons, malfunctioning knobs, or the inability to adjust the temperature or burner settings.

Symptoms of a bad control panel include:

• Unresponsive buttons or knobs on the control panel
• Inability to adjust temperature or burner settings
• Scratches, dents or other damage 

Replace your faulty or damaged control panel with this genuine OEM part to restore your gas range. This Frigidaire part can also be used on Electrolux, Frigidaire, Gibson, Kelvinator, Westinghouse, and Sears/Kenmore.
 

This baffle is an air deflector used to direct airflow inside the appliance, helping maintain even temperatures and proper ventilation. It replaces a worn or damaged baffle to restore intended airflow paths and performance. What it does:

• Redirects internal air to help even out temperatures and airflow distribution
• Helps prevent localized hot or cold spots that can affect performance
• Can reduce abnormal airflow noise caused by loose or damaged deflectors
• Restores correct airflow routing after impact or cracking

• High-level swap; usually secures with clips or screws—inspect mounting points before installing
• Disconnect power (or unplug) and remove any shelving or panels that block access
• Handle carefully to avoid cracking thin plastic fins or tabs
• Replace hardware before completing installation

A replacement protective cover that shields internal components from heat, debris and accidental contact to help maintain safe, reliable operation. Simple, direct replacement when the original shield is damaged or missing. What it does:

• Covers and protects wiring, terminals or nearby components from heat and debris
• Helps prevent direct contact that can cause shorting, charring or other damage
• Reduces risk of noise from loose or rattling components when intact
• Restores the intended physical barrier for safe appliance operation

• Disconnect power to the appliance before inspecting or replacing this part.
• Handle edges carefully; the metal can be sharp. Use gloves and basic hand tools.

This metal shield protects internal components from heat, debris, and wear, helping the appliance run safely and reliably. It replaces damaged or missing shields to restore proper protection around sensitive parts. What it does:

• Shields wiring and components from heat and debris to prevent damage
• Helps reduce risk of shorting or component exposure caused by a damaged panel
• Common symptom: visibly bent, warped, or corroded shield
• Common symptom: unusual odors or hot spots near the area the shield covers

• One replacement shield/trim panel as shown

• Disconnect power (and gas supply if applicable) before starting any repair
• Wear gloves to protect against sharp sheet-metal edges
• Retain and reuse original fasteners when possible; replace any stripped screws
• If accessing the shield requires removing other panels, keep track of hardware and order of removal

This refrigerator cabinet insulation panel helps keep cold in and heat out to improve cooling consistency and efficiency. It replaces damaged or missing insulation to reduce frost, hot spots, and excess compressor run time. What it does:

• Provides thermal barrier between the cabinet and outer shell to retain cold air
• Helps reduce frost buildup and condensation inside the cabinet
• Can improve cooling performance and reduce excessive compressor cycling
• Dampens vibration and reduces operating noise

• Disconnect power and empty the appliance before beginning any repair
• Remove interior panels or shelves as needed to access the insulation; follow model-specific service instructions
• Handle insulation carefully to avoid tearing; use gloves and eye protection when trimming or repositioning
• If adhesive or clips are damaged, replace with OEM fasteners