Fggh3047vfb Parts

The Door Lock Motor and Switch Assembly is an OEM component specifically designed for Frigidaire ranges. This locking system safely secures oven doors during cleaning or self-clean cycles through the electromagnetic operation. 

Symptoms of a defective assembly include: 

• Failure to engage or release the door lock function
• Loud buzzing or grinding noises from internal mechanisms  
• Error codes related to door lock detection problems

Causes relate to wear from continual operation of locking solenoids over extended use. Exposure to cooking residues and cleaning chemicals can deteriorate switches. 

This OEM Frigidaire part is also compatible with some Kenmore and GE appliance brands. Replacing worn components restores reliable door locking to automatically secure during high-heat cycles. Timely maintenance preserves safety functionality.
 

This electric surface burner replaces a worn or broken cooktop heating element to restore even heating for pots and pans. It's a direct-replacement heating element commonly used on many Frigidaire electric ranges and cooktops. What it does:

• Heats cookware by converting electrical energy into heat for stovetop cooking
• Replaces cracked, unresponsive, or unevenly heating elements
• Helps stop sparks, intermittent heating, or a burner that won't warm
• Works with compatible receptacles and cooktop wiring to complete the circuit

• One electric surface burner element

• Disconnect power to the range at the breaker or unplug before servicing
• Remove the cooktop grate and any retaining clips to lift out the old element; reinstall in reverse order
• Inspect terminal connections and receptacle for damage; replace receptacle if corroded or loose

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This replacement burner is the cooktop surface heating element that provides consistent heat for pots and pans. It restores stovetop cooking performance and is sized to match the original heating location. What it does:

• Heats cookware on the stove top for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven heating and hotspots caused by a failing burner
• Designed to mate with the original cooktop terminals for proper electrical connection

• Disconnect power at the breaker before starting any repair to avoid shock
• Allow the cooktop to cool fully and handle the element carefully to avoid glass/ceramic damage
• Secure all connections

This replacement control panel restores the front console on compatible Frigidaire cooktop/oven units, providing a clean surface for the selector buttons and display so controls are easy to read and use. What it does

• Replaces a cracked, scratched, or faded console surface to restore appearance and button accessibility.
• Houses and protects the touchpads/buttons and display area from spills and debris.
• Can resolve issues where damaged panel surfaces interfere with button operation or visibility.
• Matches OEM trim and mounting points for a direct fit when the correct model is specified.

• One control panel (console trim) as shown.

• Disconnect power to the appliance before beginning any work to avoid shock or injury.
• Remove screws and retainers securing the console; save all fasteners for reinstallation.
• Handle the panel carefully to avoid scratching; align mounting tabs and connectors before tightening.

This baffle is an air deflector used to direct airflow inside the appliance, helping maintain even temperatures and proper ventilation. It replaces a worn or damaged baffle to restore intended airflow paths and performance. What it does:

• Redirects internal air to help even out temperatures and airflow distribution
• Helps prevent localized hot or cold spots that can affect performance
• Can reduce abnormal airflow noise caused by loose or damaged deflectors
• Restores correct airflow routing after impact or cracking

• High-level swap; usually secures with clips or screws—inspect mounting points before installing
• Disconnect power (or unplug) and remove any shelving or panels that block access
• Handle carefully to avoid cracking thin plastic fins or tabs
• Replace hardware before completing installation

This water inlet valve controls water flow to the refrigerator's dispenser and ice maker so you get a steady supply when needed and stop unwanted leaks. Replaces a worn or faulty valve to restore proper fill and dispensing. What it does

• Opens and closes to allow water into the ice maker and dispenser when requested
• Stops water flow to prevent overfilling or continuous running
• Commonly replaced when dispenser or ice maker won't fill, has weak flow, or leaks
• Works with the refrigerator's water line and solenoid actuators to meter supply

• One water inlet valve (single unit as shown)

• Disconnect power and shut off the household water supply before starting
• Drain lines and remove front or rear access panels to reach the valve
• Inspect and replace any damaged water lines or fittings; tighten connections and check for leaks after installation

This replacement control panel restores the user interface that houses the oven/range controls and display, letting you regain a clean, readable console and reliable button access. It's a direct-fit exterior panel designed for factory appearance. What it does:

• Replaces a cracked, scratched, or cosmetic-damaged control surface
• Restores button/keypad access and supports the display/indicator openings
• Helps eliminate issues caused by damaged or warped front panel parts
• Matches factory fit and finish to maintain appliance appearance

• Disconnect power to the appliance before attempting any service
• Handle carefully to avoid scratching the finished surface or damaging clips/tabs
• Use basic hand tools; support the console to prevent stress on wiring and brackets
• Refer to your appliance's service manual or manufacturer instructions for step-by-step removal and reassembly

This ignitor orifice assembly replaces the gas feed and ignition interface on compatible gas ovens and ranges, restoring reliable spark and proper gas delivery for burner ignition. Use it when ignition or burner performance is inconsistent. What it does:

• Directs gas flow to the igniter/burner and provides the correct orifice opening for safe ignition
• Allows the igniter to light the burner reliably for even cooking heat
• Commonly used when burners won't light, take too long to ignite, or flame is weak/uneven
• Matches OEM mounting and gas-port alignment for straightforward replacement

• One ignitor orifice assembly

• Turn off gas supply and electrical power before beginning work
• Follow manufacturer instructions and local codes for testing for leaks after installation

This replacement cooktop grate restores a stable surface for pots and pans on a gas range, helping even heating and safe cookware support. It matches the original shape to maintain proper burner clearance and cookware stability. What it does:

• Supports cookware over the burner for steady, even heating and safer cooking
• Aligns with burner locations to prevent tipping and enable proper flame clearance
• Replaces worn, chipped, or misshapen grates that can affect burner performance
• Preserves cooktop appearance when replacing damaged or rusted grates

• Designed for drop-in replacement; lift out the old grate and set the new grate into place
• Ensure burners are completely cool and gas is turned off before handling
• Clean the cooktop surface before installing to ensure a flush, stable fit
• If grate alignment or burner performance issues persist, inspect burner caps and heads for proper seating

This replacement refrigerator cabinet liner restores the appliance's interior surface, helping contain spills and support shelves/drawers for reliable storage. Fits specific Frigidaire models; use the part number on your unit. What it does:

• Replaces cracked, warped or damaged interior surface that can allow moisture, odors, and debris to collect
• Provides the finished interior surface that supports shelf and bin mounting points
• Helps maintain a clean, easy-to-wipe interior and prevents insulation exposure
• Reduces the risk of leaks by restoring the proper fit and seals where the liner meets doors and gaskets

• One refrigerator cabinet liner as shown

• Disconnect power and empty the refrigerator before starting; follow manufacturer safety guidance
• Installation generally requires removing shelves, drawers and trim; small fasteners or clips may secure the liner
• Avoid sharp tools to prevent damage; inspect surrounding seals and hardware while replacing the liner