Fl217901q Parts

Replacement mounting screw for brush cutters, chainsaws, trimmers, and blowers. Replaces lost, stripped, or broken screws during repairs or maintenance.

The crankcase gasket is a standard part found in internal combustion engines. This gasket creates an air-tight seal between the crankcase and the cylinder head. It is exposed to constant vibration, high heat, and pressure, which can cause the gasket to warp, wear, or even break over time and with regular use. Gaskets are typically considered a part of routine maintenance and should be replaced as soon as damage or performance issues are noticed. A faulty gasket could cause air or fluid leaks that result in poor engine performance or an inoperable engine. This genuine OEM gasket is manufactured by Paramount and is compatible with several small engines on lawn and garden equipment. It can be used in machines from Poulan, Weed Eater, Jonsered, Husqvarna, and Paramount. This crankcase gasket is compatible with dozens of models of hedge trimmers, blowers, and edger/trimmer models from these brands. It is made of durable composite material and sold as a single unit. It is advised to replace gaskets whenever performing engine repairs to ensure a secure seal when reassembling the components. It is also a good idea to keep extra gaskets on hand in case of emergency repair needs.

Bearing facilitates smooth rotation in outdoor power equipment. Replace when you notice grinding noise, vibration, or rough operation. Verify fit.

This handle is a genuine Husqvarna part. It is also sometimes called a throttle housing. It is manufactured as a replacement part for weed wackers, trimmers, and line trimmers. It is not uncommon for the handle to become worn over time, especially under heavy or frequent use. It will be visibly worn and uncomfortable to grip.To make this repair, empty the fuel tank, disconnect the spark plug, and let the engine cool completely. The handle is attached by screws. Remove the screws to separate the two halves of the handle. The spring, throttle control trigger, and throttle cable will need to be removed in order to disconnect the other half of the handle and fully replace it.This is a genuine OEM part sourced directly from the manufacturer. It is sold individually so consider whether both sides need to be replaced. It is compatible with machines made by Craftsman, Husqvarna, Poulan, and Weed Eater.

The ignition module, also called an armature magneto or a magneto charger, is an integral part of handheld gasoline lawn and landscape tools like grass trimmers, leaf blowers, power vacuums, hedge trimmers, and edgers. The ignition module provides a high voltage jolt to the spark plug of a handheld tool when a pull cord is yanked. This in turn fires the fuel/air mixture in the carburetor, bringing the engine to life. Typically, the ignition module is durable and can last as long as the effective life of the tool. Sometimes, however, heavy usage can result in the magneto not being able to deliver the necessary voltage to the spark plug. When repeated pulling of the starter rope yields no sign of combustion, often the culprit is a faulty ignition module. Because this part is used on so many different types of equipment, it is impossible to give simple replacement instructions. It should be noted, however, that the part is easily located since one end of the ignition modules is the spark plug cap. Be sure to replace this part with one like this, which is a genuine OEM replacement part, manufactured to replicate the original part exactly. This ignition module is compatible with device sold by Husqvarna, Jonsered, Weed Eater, Paramount, and Poulan.

Carburetor gasket kit creates an airtight seal between carburetor and cylinder. Replace if engine runs rough, leaks fuel, or loses power. Confirm fit.

Designed for use with a wide range of string trimmers, this momentary switch is a genuine OEM replacement part. A momentary switch, also known as a kill switch, is a safety precaution that kills an appliance's engine in a moment, even if the engine is not set to the off position. This helps prevent accidents if the operator begins to lose control of the trimmer. At the touch of a button, the engine cuts and cannot be restarted for a short period (usually about five seconds). Momentary switches are positioned in a way that they don't often sustain damage but, over time, they can wear out. Once a switch stops working, it will need to be replaced to ensure safe operation. This is a fairly straightforward fix that only requires a screwdriver to open the tiller's handle and pliers to safely remove the wiring. This part is designed for string trimmers made by Poulan, Weed Eater, Paramount, and Husqvarna. It ships individually of any other hardware is comes sourced from the original manufacturer.

Prevents air leaks in your carburetor. Replace if your engine runs rough, stalls, or won't start. Includes gaskets and diaphragm. Confirm fit with your model.

String trimmer won't start or rope won't retract? This starter pulley keeps the starter rope aligned for reliable engine starting. Simple DIY fix.

Replacement D-handle nut for brush cutters and trimmers. Secures the D-handle to the shaft assembly. Replace if stripped, cracked, or missing.

String won't feed or trimmer head doesn't spin? This hub connects the trimmer line spool to the drive shaft, enabling proper string deployment and cutting.

This starter spring will put tension on the starter pulley, which will then retract the starter assembly on a range of lawn and garden equipment. It engages the drive cup on the flywheel to start the engine when it is pulled. The starter spring is made from durable metal, but it may need to be replaced if it fails. It could become damaged or corroded, or it may have simply worn down over time and a lot of usage. A problematic starter spring will mean that the starter cord does not recoil properly after being pulled. It can make starting the engine difficult at best, and impossible at worst. In these cases, a replacement becomes necessary. The authentic OEM replacement starter spring is sold individually. It can be used with string trimmers, leaf blowers, and hedge trimmers. It is compatible with Craftsman, Husqvarna, Poulan, Poulan Pro, and Weed Eater brands. Buyers must always make sure they are choosing the correct option for their make and model.

Fix fuel leaks or gas tank cracks in your trimmer with this complete fuel tank assembly. Includes fuel lines and filter. Basic hand tools required.

Wave washer for lawn and garden equipment. Replace when worn or damaged to maintain proper tension and spacing. Verify fit with your model number.