Gdt535pyv6fs Parts

The Filter Ball is an OEM replacement part for GE dishwashers. As a key internal filtration component, it helps trap and remove food soils and other residue from washing water to maintain hygienic cleanliness standards. 

Causes of a bad filter ball can include worn filter mesh that no longer adequately strains soils or substances that pass through more readily over time. 

Symptoms of a bad filter ball include:

• Dirty wash water that fails to fully sanitize dishes
• Cloudy rinse water that leaves behind streaks and residue 
• Excess food debris collecting in drainage areas 

This GE replacement filter ball is also compatible with some Hotpoint, RCA, and Kenmore dishwashers.

The Set Screw is an OEM part for GE refrigerators. The set screw fits into the handle assembly, ensuring a tight and stable connection to the refrigerator door. This set screw is essential for preventing the door handle from becoming loose or coming off, which can affect the ease of opening and closing the refrigerator door. 

Causes of a malfunctioning Set Screw can vary. Normal wear and tear is a common issue, causing the screw to strip or loosen over time. Incorrect installation is another factor.  

Symptoms of a bad Set Screw include:

• A loose refrigerator door handle, which may wobble or detach partially from the door.
• Difficulty in opening or closing the refrigerator door due to a lack of secure grip.
• The need to frequently retighten the door handle.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The screw is an OEM replacement component for GE dishwashers. It is used to securely fasten parts inside the dishwasher tub assembly.

Causes of a damaged or defective screw usually involve wear from continuous mechanical stresses and vibration during dishwasher usage. Loose parts affect machine balance and performance.

Symptoms of a compromised screw placement include:

• Noises or abnormal sounds coming from inside the tub  
• Intermittent error codes related to moving components
• Detached or misaligned spray arms or filters
• Insecure tub fixtures that can be jarred with normal operation 

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 

The Countertop Screw & Buttonplug is an OEM part for GE dishwashers. This assembly includes screws and button plugs designed to securely fasten the dishwasher to the underside of kitchen countertops. 

Causes of a bad Countertop Screw & Buttonplug can include stripped threads from over-tightening, corrosion due to exposure to moisture, or general wear and tear that diminishes the screws' and plugs' ability to maintain a secure hold. 

Symptoms of a bad Countertop Screw & Buttonplug include:

• Dishwasher tilting forward when the door is opened
• Visible gaps between the dishwasher and countertop
• Loose feeling or movement of the dishwasher when pushed
• Screws failing to hold or remain in place

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Spring is an OEM part for GE dishwashers. This component is designed to provide the necessary tension to the dishwasher door, allowing it to open and close smoothly while ensuring it stays securely in place when shut.

Causes of a bad door spring can include wear and tear from regular use, overstretching due to excessive force, or corrosion from exposure to moisture over time. A compromised door spring can lead to issues with the door's balance and functionality.

Symptoms of a bad door spring include:

• Difficulty in opening or closing the dishwasher door
• The door not staying securely closed or dropping open suddenly
• Unusual noises when operating the door

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Door Harness Assembly is an OEM replacement part for GE dishwashers. It is an integral wiring component that connects modules on the dishwasher door to the main control board. These include interactive elements like the latch, temperature probe, and door switch.

Causes of failure can include cracked insulation, loose or severed connections, and pinched/chafed wires from repeated bending.

Symptoms of a bad door harness include:

• The dishwasher not starting or completing cycles
• Error codes related to door issues
• Sensors failing to register open/closed positions
• Lights/functions not activating as doors open

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Toe Kick Plate is an OEM component compatible with GE dishwashers. It is an exterior part that covers the bottom front portion of the dishwasher, protecting the unit from impact and preserving its aesthetic by continuing the clean lines up front.

Over time, through repeated impact from cabinetry and foot traffic, the plate's material integrity can deteriorate. 

Causes of a bad toe kick plate are generally normal wear and tear from use in a busy kitchen environment. Exposure to moisture or cleaning chemicals may also affect its appearance or functionality.

Some signs a replacement is needed are:

• Dents, dings, or cracks in the material
• Loose or improperly fitting attachment to the dishwasher
• Ripped or missing sections of the plate

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models. A new plate upgrades the look of the dishwasher and shields it from future damage.
 

The Door Hinge Pulley is an OEM part for GE dishwashers. This part works with the door springs and cables to provide smooth and balanced movement. This pulley ensures that the door operates efficiently, making it easy to load and unload dishes.

Causes of a bad door hinge pulley can include wear and tear from regular use, accumulation of debris or grease, or damage from accidental impacts.  

Symptoms of a bad door hinge pulley include:

• The dishwasher door not staying open or closed properly
• Difficulty in opening or closing the door
• Unusual noises during door operation, such as squeaking or grinding
• The door feeling loose or unbalanced

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Console Cover and Graphics Assembly is an OEM part for GE dishwashers. As the decorative front panel, it protects internal electronics from splashes and impacts while adding unique aesthetic appeal. 

Causes of a bad console cover include cracks or chips sustained over time from everyday use and cleaning. Prolonged exposure to heat and steam in the kitchen environment can also lead to the wear of printed graphics.

Symptoms of a failed console cover assembly are:

• Loss of a crisp, polished exterior appearance  
• Potential leaks or moisture intrusion affecting internal components
• Missing or damaged graphic labels obscuring control functions

This genuine OEM GE part is compatible with some Hotpoint, RCA, and Kenmore dishwasher models as well.

The Detergent Module is an OEM component specifically designed for GE dishwashers. Located inside the detergent dispenser assembly, this module plays an important role in properly releasing detergent at the selected time during wash cycles. The detergent module uses an electronic actuating motor to open detergent ports based on cycle settings.

Causes of a faulty detergent module can include mineral buildup obstructing detergent channels or a malfunctioning electronic motor.

Symptoms of a defective detergent module include:  

• Improper or incomplete dispensing of detergent during cycles
• Dishes not receiving sufficient cleaning from detergent  
• Leaks or residue left in the dispenser area
• Audible grinding sounds from the detergent dispenser

Regular maintenance helps flush out mineral deposits. Replace yours today with this genuine GE module to restore full functionality to the dispenser system.  

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This dishwasher door spring counterbalances the door so it opens smoothly and doesn't drop. Replacing a fatigued or broken spring restores proper door action, prevents sudden slamming, and reduces stress on the hinges and link components.

• Provides the tension that counterbalances the door's weight during opening and closing
• Helps prevent the door from dropping quickly or feeling unusually heavy
• Supports smooth, even movement within the door hinge/counterbalance system
• Common signs of failure: door falls open, won't stay partially open, or binds/squeaks while moving

• Disconnect power and shut off water before servicing; wear gloves and eye protection
• Remove the toe-kick to access the spring and hinge area
• Support the door; carefully relieve spring tension and transfer the spring to the same anchor points as the original
• Test door balance and motion before reinstalling the toe panel

This right-hand roller cover is the small retainer that locks a dishwasher rack roller onto its mount. Replacing a cracked or missing cover restores smooth, stable rack movement and helps prevent the roller from working loose during use.

• Secures the right-hand rack roller to its axle/mount
• Helps the rack slide smoothly and stay level
• Replaces covers that are cracked, worn, or missing
• Symptoms include: rack binding on one side, tilting/dropping, rattling, or a roller that pops off

• Disconnect power and shut off water before servicing
• Pull the rack forward and remove if needed to access the roller area
• Release the old cover's locking tabs; align and snap the new cover into place on the right-hand side
• Ensure the rack rolls smoothly and sits level; right- and left-hand pieces are not interchangeable

This dishwasher hose clamp secures a hose to its fitting to maintain a tight, watertight connection. Replacing a fatigued clamp helps stop leaks and keeps water moving reliably during fill and drain cycles. What it does:

• Secures hose-to-fitting connections at the pump, sump, or inlet/outlet
• Maintains a tight seal to help prevent drips and leaks
• Replaces a clamp that has lost tension, corroded, or broken

• 1 hose clamp

• Disconnect power and turn off the water supply before servicing
• Access point varies by model; remove the toe-kick and/or pull the unit forward as needed; place a towel to catch residual water
• Relieve/loosen the old clamp, fully seat the hose on the fitting, position the clamp behind the fitting barb, and secure
• Use the appropriate tool for your clamp style and run a short test to check for leaks

This 10-32 x 9/16 machine screw secures dishwasher components and panels. Replacing a missing or stripped fastener restores a tight fit, reduces vibration/rattles, and keeps assemblies properly aligned for reliable operation.

• Secures panels, brackets, or internal assemblies using a 10-32 machine thread
• Replaces lost, corroded, or stripped screws
• Can help resolve looseness or rattling from a loose mounting point
• Correct 9/16-inch length helps maintain proper spacing and alignment

• Disconnect power at the breaker before servicing
• Use the appropriate driver for the screw head; start threads by hand to avoid cross-threading
• Tighten snugly but do not overtighten to prevent stripping threads or damaging mating parts
• Compare to the original fastener to matching thread and length

• Thread size: 10-32
• Length: 9/16 inch

The Valve Check is an OEM replacement part for GE dishwashers. It is responsible for controlling the water flow within the dishwasher, preventing the backflow of water into the dishwasher's drain system. It makes sure that water flows in the correct direction during the dishwashing cycle. It helps maintain the integrity of the drain system and prevents any potential contamination or damage.

Symptoms of a faulty valve check include:

• Insufficient water filling or draining
• Water leaks around the valve area
• Inconsistent or erratic water flow

A bad valve check can occur due to wear and tear over time, clogging from debris or mineral deposits, or physical damage. If you notice issues such as improper water filling, inadequate water draining, or leaks around the valve, it may be time to replace the old or damaged valve check with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Dishwasher Configured Service Machine Control Board is an OEM replacement part for GE dishwashers. It serves as the central control unit, managing and regulating various operations and functions of the dishwasher.

Symptoms of a failing dishwasher service machine control board include:

• The dishwasher not powering on or responding to any input commands
• Incomplete or interrupted wash cycles
• Indicator lights or displays malfunctioning or displaying error codes
• Specific components like the water inlet valve or drain pump not functioning properly

Causes of a bad service machine control board can include electrical malfunctions, power surges or electrical spikes, physical damage from impact or moisture intrusion, or simply wear and tear over extended use.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore dishwasher models.