Gdt535pyv6fs Parts

The Wash Pump Kit is an OEM component specifically designed for GE dishwashers. The wash pump works diligently during cycles to circulate water containing detergent throughout the dishwasher, providing optimal cleaning. 

Causes of a bad wash pump can include mineral buildup in pump components due to hard water, worn seals or bearings from continuous use, or damage from foreign objects in dishes obstructing the pump.

Symptoms of a bad Wash Pump Kit include:

• Dishes not getting fully cleaned after cycles  
• Standing water remaining in the bottom of the dishwasher
• Strange noises or vibrations coming from the pump area
• Error messages related to water detection or draining issues

Replace yours today with this genuine OEM GE part for reliable water circulation during each cycle. This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This configured UI control board is the appliance's front console circuit that receives touch/press commands and displays cycle information, restoring responsive controls and accurate status feedback at the console. What it does:

• Converts button presses and touch inputs into signals for the main control
• Drives the console display and indicators so cycle status and options are visible
• Replaces worn or damaged interface electronics that cause unresponsive buttons
• Helps address symptoms such as blank or flickering display, unresponsive controls, or incorrect status lights

• Disconnect power to the appliance before beginning any service to avoid shock
• Handle the board by its edges; avoid touching components and use anti-static precautions
• Some consoles require removing trim or bezels—keep screws and fasteners labeled

This replacement AC wire harness routes power between an appliance's main control and its AC components to restore reliable electrical connections and safe operation. Designed as a direct-fit harness for compatible GE appliances. What it does:

• Provides the factory-style wiring path for AC power and signal connections
• Restores lost or intermittent power caused by damaged or frayed wires
• Replaces burned, corroded, or broken connector ends to improve electrical contact
• Helps stop erratic operation caused by open or shorted harness leads

• One replacement AC wire harness

• Disconnect power to the appliance before starting any repair
• Inspect connectors and routing; replace only if the harness matches OEM connector types
• Secure harness away from sharp edges and moving parts to prevent future damage

The AC Harness Assembly is an OEM part for GE dishwashers. As an integral part of the electrical system, this harness is designed to safely connect and supply power to critical components underneath the tub. 

Causes of failure involve cracked insulation, damaged connectors, or grounding problems developing over extended use.

Symptoms of a faulty harness include:

• Intermittent operation of systems or cycles  
• Error codes related to electrical malfunctions
• Loose, detached, or rubbed wires exposing live circuits

This OEM GE replacement is also compatible with select Hotpoint, RCA and select Kenmore models.

Replacement fill funnel hose that routes incoming water into the appliance's fill system. Restores proper water flow to the fill inlet and helps stop leaks at the funnel connection when the original hose is cracked or worn. What it does:

• Channels incoming water from the inlet to the appliance fill assembly.
• Replaces cracked, split, or collapsed funnel hoses that can cause leaks.
• Common symptoms it can fix: water leaking at the funnel connection, slow or incomplete fill, water pooling beneath the appliance.
• Simple direct-replacement part—matches the original funnel hose routing and connection points.

• Always disconnect power and shut off the water supply before servicing the appliance.
• Inspect mating fittings, clamps, and seals; replace clamps or seals if corroded or damaged.
• Use basic hand tools to remove and secure hose clamps; avoid twisting or kinking the hose during installation.

This bracket support hinge secures the appliance door to the cabinet, providing a stable pivot point for smooth opening and closing. Replaces a worn or broken hinge bracket to help restore proper door alignment and operation. What it does:

• Provides a mounting point for the door hinge to keep the door aligned and secure
• Prevents door sagging, uneven gaps, or misaligned closing caused by a damaged bracket
• Reduces wobble, clicking, or binding at the hinge area during door movement
• Works as the structural support between the door and cabinet to maintain proper sealing/contact

• One bracket support hinge

• Disconnect power and empty the door (shelves/drawers) before starting for safety and easier handling
• Support the door while removing/installing the hinge to prevent dropping or damage
• Use basic hand tools; follow OEM torque and alignment guidance when tightening fasteners

This insulation toe kick is a replacement panel that fits the refrigerator base to help block drafts and protect internal components under the cabinet. It restores the factory barrier that supports temperature stability and efficient operation. What it does

• Replaces damaged or missing toe-kick insulation that lets cold air escape beneath the appliance
• Helps reduce drafts and minimize warm air intrusion into the refrigerator cavity
• Protects wiring and components located in the toe-kick area from dust and debris
• Can help prevent uneven cooling or frost buildup that results from compromised base insulation

• One insulation toe kick panel

• Disconnect power to the appliance before starting any service
• Remove the existing toe kick/board and fasteners, then position the replacement so mounting tabs align with factory slots
• Avoid compressing or tearing the insulation; maintain original fit for proper performance

The Third Rack Tray is an OEM part for GE dishwashers. It provides an additional level of loading space for smaller dishes and utensils above the lower racks. 

Causes of a bad third rack tray can include deformations from overloading or use of improper loading patterns. Repeated impact from loading or unloading can also cause damage over time. 

Symptoms of a bad third rack tray include:

• Difficulty sliding racks in/out or level rack operation
• Warping, bending, or blocking the functionality of upper spray arms  
• Dishes not receiving adequate wash coverage due to spacing issues
• Rattling noises or loose movement during wash cycles

This OEM GE part is compatible with Hotpoint, RCA, Asko, and some Kenmore models. 

This replacement vent restores proper air flow for non-fan appliance models, helping exhaust heat and cooking odors while protecting internal components from debris. A direct-fit OEM-style vent for units that do not use a powered blower. What it does:

• Channels exhaust air and heat away from the appliance to maintain safe operating temperatures
• Helps prevent buildup of debris and grease in the vent opening
• Can reduce intermittent overheating and cooking odors caused by a damaged or missing vent
• Restores proper fit and appearance at the appliance vent outlet

• One replacement vent

• Disconnect power to the appliance before beginning any service
• Access may require removing the lower kick panel or outer cover
• Use basic hand tools; align clips or screw holes and avoid forcing the part into place

This bracket support hinge helps secure and guide the appliance hinge assembly, restoring proper door alignment and reliable movement. It replaces a worn or damaged hinge support to improve fit and operation. What it does:

• Supports the hinge assembly to maintain correct door alignment
• Reduces door sag, binding, or uneven closing caused by a damaged bracket
• Restores smooth hinge movement and helps prevent further wear to hinge components
• Commonly used when the door feels loose or the hinge appears bent or broken

• One bracket support hinge

• Turn off and unplug the appliance before starting any repair
• Remove surrounding panels or trim as needed to access the hinge per your model's service instructions
• Use appropriate tools and keep fasteners organized for reassembly
• Inspect and replace additional components as needed

The Upper Rack Roller and Stud Assembly is an OEM replacement part for GE dishwashers. Located inside the upper dish rack, this assembly utilizes precision-engineered plastic rollers and support studs to guide rack movement. Reliable rollers and stable rack positioning are key to smooth operation and effective washing. 

Causes of a faulty assembly include worn or cracked rollers, broken or missing support studs, or loss of lubrication after extended use.

Symptoms of a problematic roller and stud assembly include:

• Noisy or grinding sounds were heard from the upper rack area
• Rack that does not glide smoothly or gets stuck during opening/closing  
• Potential damage to rack or componentry from an unsupported rack
• Difficulty loading or positioning dishes securely 

This GE replacement part is compatible with Hotpoint, RCA, and Kenmore models.

This console bracket secures the appliance control panel to the cabinet so the console stays aligned and stable during use. Replacing a worn or damaged bracket restores a snug, rattle-free control panel and proper button alignment. What it does:

• Anchors the console/control panel to the appliance cabinet to prevent movement and sagging
• Keeps switches, buttons and displays properly aligned for reliable operation
• Stops rattling, vibration noise or loose-feeling controls caused by a broken or bent bracket
• Helps maintain safe fitment so controls and wiring stay secure

• One console bracket

• Disconnect power (unplug or turn off breaker) before starting work to avoid shock
• Handle the control assembly and any attached wiring carefully to avoid damage
• Basic hand tools are typically required; keep all mounting screws and clips for reuse unless damaged

The Button is an OEM replacement part for GE dishwashers. It is a simple yet essential component responsible for allowing users to select wash cycles and activate various dishwasher functions. The button interfaces directly with the electronic control board to initiate commands.

Causes of a bad button include normal wear and tear through frequent use over time as well as possible malfunctions in the electrical switching components.

Symptoms of a bad button include:

• Failure to activate the intended function when pressed
• Unresponsive or non-functional buttons 
• Difficulty selecting desired wash cycles
• Cracked, faded, or illegible button labeling

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The handle asm is an OEM replacement part for stainless steel GE dishwashers. This handle assembly is responsible for allowing users to easily open and close the dishwasher door. 

Causes of a bad handle asm can include wear and tear from repeated use, damage from accidental impacts, or loose or broken mounting components. Over time, normal everyday use can cause handles to become loose, cracked, or nonfunctional. 

Symptoms of a bad handle asm include:

• The handle being loose, wobbly, or detached from the door 
• Cracking or splitting of the handle material
• Difficulty opening or closing the dishwasher door
• Inability to securely latch the door closed

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This rail and end cap assembly replaces a worn or broken rack rail so the appliance rack glides smoothly and stays secured. It restores proper support and reduces catching, slipping, or noisy movement during use. What it does:

• Supports the appliance rack and provides a smooth sliding track.
• Replaces damaged or cracked rails and end caps that cause the rack to catch or bind.
• Helps prevent the rack from slipping off the track or dropping when extended.
• Reduces grinding, scraping, or other abnormal noises tied to worn rail components.

• Turn off power to the appliance (unplug or shut off the breaker) before starting.
• Remove the rack and align the rail with the track; snap or slide the end cap into place per the appliance's service instructions.
• Use basic hand tools if needed; avoid excessive force to prevent breakage.

This rubber grommet provides a protective seal where hoses, wires or components pass through openings, helping prevent chafing and moisture intrusion. Use it to restore a tight fit and reduce wear at the penetration point. What it does:

• Seals and cushions openings to help prevent water leaks and air gaps.
• Protects wiring and hoses from rubbing on sharp metal edges that can cause wear or shorts.
• Reduces vibration and rattling by holding parts securely in place.
• Common symptoms of failure: visible cracking, missing or torn grommet, water dripping near the opening, or rubbing noises.

• Disconnect power to the appliance and turn off water supply before beginning any repair.
• Remove the access panel or boot as needed to reach the opening; press the grommet into the hole until fully seated.
• Inspect surrounding seals, hoses and wiring; replace any damaged components to prevent repeat issues.