Ghws3605f0 Parts

Secures the washer gasket in its groove to maintain a watertight seal during operation. Replace if worn or damaged to prevent leaks from a loose gasket.

This knob retainer secures a control knob to its switch/timer shaft, keeping your selections engaged and the knob firmly in place. Replace a worn or missing retainer to restore a solid feel and dependable operation.

• Holds the control knob securely on the switch/timer shaft
• Restores positive engagement when turning the knob
• Common fix for a loose, slipping, wobbly, or falling-off knob
• Helps resolve intermittent selection when the knob doesn't grip the shaft

• Disconnect power before servicing
• Pull off the knob to access the retainer
• Align the new retainer with the shaft and press firmly until fully seated
• Reinstall the dial/knob and verify proper engagement

Fix a washer door that won't stay closed or rattles during operation. This door striker restores reliable latch engagement for proper sealing.

This machine screw secures panels, brackets, and internal components in compatible washers. Replacing a missing or stripped fastener restores a tight fit to help reduce vibration and keep parts properly aligned.

• 10-32 thread; 5/8-inch length; Torx T25 drive
• Fastens components and panels to resist loosening from vibration
• Replaces lost, corroded, or stripped screws
• Helps address loose or rattling panels, misalignment, or hardware that won't tighten

• Unplug the appliance and turn off water supply before servicing
• Use a T25 Torx driver; start threads by hand to avoid cross-threading
• Tighten snugly; do not overtighten
• Repair or replace the bracket/panel for a secure hold

If your washer vibrates excessively or makes loud banging noises during spin, a worn suspension spring may be the cause. Supports the tub and dampens movement.

If water leaks around your washer's drain area or won't drain properly, you may need a new pump filter assembly. Traps debris and lint from the pump.

Replacement door glass panel for front-load washers. Installs in the door frame to provide a viewing window. Order if your glass is cracked or broken.

If your washer's detergent drawer pulls out too far or won't stay in place, the dispenser drawer retainer may be broken. Simple snap-in fix.

10-18 hex washer screw for securing panels, trim, brackets, and components in appliances. Replaces lost, stripped, or corroded fasteners.

This leveling leg assembly supports and stabilizes your washer by allowing you to adjust its height for a level installation. Keeping the appliance level helps reduce vibration, noise, and movement during operation.

• Adjusts the washer's stance to ensure it sits level on the floor
• Helps prevent excessive vibration, walking, and rattling noises
• Supports proper spin performance by improving machine stability
• Common fix when a foot is worn, damaged, or will not hold adjustment

• Unplug the washer and turn off water supply before servicing
• Tip the appliance carefully to access the leveling point
• Thread the new leg into the base and adjust until level; lock if applicable
• Verify all legs contact the floor firmly and recheck level after test run

Long shipping bolt secures washer tub during transport. Replace missing or damaged bolts to safely immobilize drum before moving your appliance.

This hex-head screw secures dishwasher panels, brackets, and internal hardware so parts stay tight and rattle-free. Replace missing or stripped fasteners to restore a secure fit and reliable operation.

• Fastens panels, brackets, and other dishwasher components to the tub or frame
• Replaces a missing, stripped, or corroded screw that no longer holds securely
• Helps eliminate vibration and rattling caused by loose hardware
• Maintains proper alignment and secure mounting of parts during operation

• Disconnect power and shut off water supply before servicing
• Keep track of fastener locations and orientation for correct reassembly
• Start threads by hand; use an appropriate nut driver or socket to tighten
• Tighten snugly—do not overtighten, especially when threading into plastic

Fix leaking water connections with this 4-foot rubber inlet hose set. Replaces worn lines that cause water pooling behind your washer. Easy DIY fix.

The Pin Damper is an OEM component specifically designed for GE washing machines. Located within the transmission housing, it provides a cushioning effect between the drive motor and gearing assemblies. 

Causes of a bad pin damper involve cracked rubber, sheared pins, or lack of lubrication from extended operational use over time.

Symptoms of a bad pin damper include:

• Grinding or vibration felt from transmission housing  
• Excessive noise emitted during gear-shifting changes
• Premature wear observed on drive shaft bushings/bearings

This OEM GE replacement pin damper helps reduce noise, protects components from impact shocks, and promotes smooth operation. Compatible with some Hotpoint, RCA, and Kenmore models as well, installation maintains optimized drivetrain performance. 

Replace a cracked or leaking dispenser drawer body housing in your washer. This molded housing securely holds the dispenser assembly components.

This hex washer-head screw is used in dishwashers to secure panels, brackets, and other hardware. Replacing a missing or corroded fastener restores a tight, stable installation and helps stop looseness or vibration during cycles.

• Fastens dishwasher panels, brackets, trim, or mounts to the cabinet/frame
• Replaces lost or stripped hardware after service or installation
• Helps address loose or rattling panels and minor misalignment
• Stainless steel construction per OEM spec for moisture-prone environments

• Disconnect power and water supply before servicing the dishwasher
• Wear gloves; sheet metal edges can be sharp
• Start threads by hand to avoid cross-threading; tighten with an appropriate driver
• Do not overtighten, especially when threading into plastic