Kdtm604kps Parts

Leaking under your dishwasher or water pooling after cycles? The sump assembly houses the motor and pump. Requires disassembly; check hoses first.

This factory fastener replaces a worn, stripped, or missing screw to securely hold appliance components in place, restoring proper fit and reducing vibration, noise, and loosening issues. It helps maintain alignment and safe operation of the affected assembly. What it does:

• Secures panels, brackets, or internal components as designed for the appliance
• Maintains assembly alignment for reliable performance
• Helps prevent rattling or vibration from loose hardware
• Replace when the original screw is missing, corroded, stripped, or damaged

• 1 screw

• Disconnect power; for gas- or water-connected appliances, shut off supply before servicing
• Match the screw to its original location and retain any spacers or clips used with the original
• Start threads by hand to avoid cross-threading; use the correct driver size
• Tighten until snug; do not overtighten to avoid stripping threads

Traps food particles and debris to prevent drain clogs and maintain optimal water circulation. Replace when cleaning no longer restores performance. Confirm fit with your model number.

Retainer pin secures the top spray arm underneath the dishwasher's interior roof panel. Replace if cracked, broken, deformed, or missing from wear.

Secures the sliding dishwasher rack at the rear of the tub. Replace if your clip is cracked, broken, or missing to keep the rack properly positioned.

Metal toe panel for dishwashers. Covers the bottom front edge of the unit. Replace if cracked, dented, scratched, or missing to restore appearance.

Replacement mounting screw for dishwashers and ranges. Secures panels, brackets, and internal components when original hardware is stripped, missing, or corroded.

This genuine replacement door handle restores a solid, comfortable grip for opening and closing your appliance's door. Replace a cracked, loose, or missing handle to keep daily use safe and the appliance looking factory-clean. What it does:

• Provides the handhold needed to open and close the door
• Transfers pull force to the door without stressing the latch
• Helps ensure the door can be operated safely and consistently
• Common symptoms: handle cracked, broken, loose, spinning, or missing

• 1 door handle

• Disconnect power before servicing; allow hot surfaces to cool
• Protect surrounding surfaces; support the door if required by your model
• Access the mounting screws as directed by your service manual; note screw locations and any spacers
• Tighten screws evenly without overtightening; wear cut-resistant gloves

The Insulation is an OEM part for GE dishwashers. It is located inside the dishwasher tub and helps maintain optimal temperatures during the wash cycle. The insulation forms a barrier that minimizes heat transfer between the tub interior and exterior cabinet walls.  

Causes of bad insulation can include cracks or compression damage over time. Excess moisture during washing may also cause premature breakdown.

Symptoms of a bad insulation include:

• Inability to efficiently heat or maintain water temperatures  
• Extended cycle times and higher energy usage
• Temperature fluctuation issues can trigger error codes
• Condensation or moisture inside the cabinet walls

This genuine OEM GE insulation restores the tub's optimal thermal properties. It is also compatible with some Hotpoint, Profile, and select Kenmore models manufactured for Sears. Replace yours now to optimize energy efficiency and washing performance.
 

Replacement dishwasher mounting screw secures panels, brackets, and internal components. Needed when original fasteners are missing, stripped, or damaged.

This factory screw secures components in your appliance to keep them properly mounted and stable during operation. Replacing a missing or damaged screw restores a tight fit and helps prevent vibration, noise, or loosening parts.

• Fastens panels, brackets, or trim to maintain correct alignment
• Can address rattling, vibration, or loose/misaligned parts where this screw is used
• Helps prevent wear from movement caused by missing or stripped hardware

• Unplug power and shut off utilities before service
• Note original screw location and orientation; replace like-for-like
• Do not overtighten—start by hand to avoid cross-threading
• Address threads before installing the new screw

Dishwasher motor hums but won't start? This capacitor provides the phase shift needed for your circulation motor to run. Easy 15-minute repair.

Replace cracked or worn dishwasher dishrack wheels that guide the upper rack in and out smoothly. Single wheel for convenient loading and unloading.

The Inlet Hose is an OEM part for Whirlpool built-in dishwasher models. This hose delivers fresh water from the household supply to the appliance spray arms and pumps. 

Symptoms of a faulty inlet hose include:

• Leaks or drips around hose connections  
• Kinks or cracks in the supply line tubing
• Restricted or no water flow to critical systems
• Improper water levels causing wash performance issues

Causes can be deformation from tight bends over time. Mineral buildup inside the hose is also common with extended use. Accidental damage during plumbing work presents another potential cause.

This authentic Whirlpool replacement is compatible with some Maytag, Jenn-Air and Amana dishwasher brands as well.

Replacement silverware basket for dishwasher lower rack. Organizes and secures utensils during wash cycles. Needed when original is cracked or missing.

Replacement water supply hose for dishwashers. Connects household water line to the dishwasher inlet. Replace if cracked, leaking, or damaged.