Ldss2612tdo Parts

The Dishwasher Installation Bracket Kit is an OEM part for LG dishwashers. This kit includes brackets that secure the dishwasher to the countertop, cabinetry, or floor, ensuring it remains stable during operation. Proper installation of these brackets is essential for preventing excessive movement and vibration during the dishwashing cycle.

Over time, installation brackets can become loose or damaged due to constant vibrations, improper installation, or accidental impacts. If the brackets are compromised, the dishwasher may not be securely anchored, leading to various operational issues.

Symptoms of a bad installation bracket kit include:

• The dishwasher moving or shifting during operation
• Increased noise and vibration levels
• Difficulty in keeping the dishwasher level
• The dishwasher door not closing properly

This OEM LG part is also compatible with Sears/Kenmore.

The Sump and Motor Assembly is an OEM replacement part for LG dishwashers. As a functional pumping component, it circulates water and removes debris during dish cycles.

Symptoms of a bad sump and motor assembly can include:

• Inability to properly fill or drain water from the dishwasher
• Leaks or excessive pooling of water inside the unit 
• Loud knocking or grinding noises from the motor area

Causes of failure may involve a clogged or cracked sump housing impairing flow, or wear of the motor bearings degrading power output over time.

This genuine OEM LG part is also compatible with some select Kenmore brand models.

This dishwasher sensor assembly contains the thermistor that monitors wash-water temperature and sends readings to the control. Replacing a faulty sensor restores accurate heating and cycle timing for consistent cleaning and to prevent temperature-related interruptions. What it does:

• Measures wash-water temperature via an NTC thermistor
• Sends a resistance signal to the control to manage heater operation and cycle timing
• Helps maintain target temperatures for proper cleaning performance
• Common failure symptoms include no heat or overheating, long/short cycles, temperature-related errors, or poor cleaning/drying

• Disconnect power at the breaker and shut off water before servicing
• Access the sump area from the bottom; you may need to pull the dishwasher forward for clearance
• Expect some residual water—protect the area with towels
• Seat the sensor fully in the sump opening, reconnect the harness, and run a test cycle to check for leaks and proper heating

This check valve is a one-way valve used in the refrigerator's water line. It prevents backflow to maintain pressure for the dispenser and ice maker, helping reduce drips and ensuring consistent water delivery.

• Allows water to flow in one direction only to prevent backflow
• Helps maintain line pressure for steady dispensing and proper ice fills
• May reduce post-dispense dripping at the water outlet
• Failure symptoms can include slow/sputtering dispense, dripping, or inconsistent ice fills

• Unplug the appliance and shut off the household water supply before servicing
• Dispense water to relieve pressure; place a towel to catch residual water
• Note the valve's orientation/flow direction and tubing routing before removal
• Fully seat tubing and secure connections; restore water and check for leaks

This inlet hose routes fresh water into the dishwasher during the fill cycle. Replace a cracked, kinked, or leaking hose to restore proper water flow and help prevent puddles or water damage beneath the unit.

• Routes water into the dishwasher during fill
• Maintains a sealed path to help prevent leaks
• Common fix for leaks under the unit, visible cracks/kinks, or slow/no fill
• Replaces aged, brittle, swollen, or punctured tubing

• Disconnect power and shut off the water supply before servicing
• Place a towel or shallow pan to catch residual water when removing the old hose
• Note the original routing; transfer and secure existing clamps/fittings as needed
• Restore water and run a short cycle while checking all connections for leaks

This drain hose channels wastewater from the appliance to your home drain. Replace a cracked, kinked, or clogged hose to stop leaks and ensure water exits the unit properly during operation.

• Routes water from the appliance to the household drain or drip pan
• Maintains a clear drainage path to prevent backups and leaks
• Damage, kinks, or blockages can restrict flow and cause draining issues
• Typical symptoms: standing water, slow or no drain, leaks, or drain-related error codes

• Disconnect power and shut off the water supply before servicing
• Keep a towel or shallow pan handy to catch residual water
• Note routing and orientation; transfer any existing clamps or seals from the old hose
• Secure connections fully and run a brief test to check for leaks

This cam switch is the cycle-selector cam that engages the washer's internal switches to control cycle sequencing and functions. Replacing a worn cam restores proper mechanical engagement for reliable cycle selection. What it does:

• Rotates with the timer to actuate internal selector switches and sequence wash functions
• Ensures correct engagement for fill, agitate, spin and drain commands
• Common symptom: machine won't advance through cycles or behaves inconsistently during select cycles
• Helps stop skipping or incorrect cycle selections caused by a cracked or worn cam

• Disconnect power before service to avoid shock or injury
• Access may require removing control console or top panel; follow the manufacturer service manual
• Handle plastic cam surfaces carefully to avoid damage; confirm correct orientation before reassembly

This impeller screw secures the pump impeller so the washer's drain system operates correctly. It's a small but critical fastener that keeps the impeller mounted and aligned for reliable water removal. What it does:

• Holds the pump impeller to the motor or pump shaft to maintain proper rotation
• Prevents the impeller from coming loose or wobbling during operation
• Can help stop grinding or unusual pump noises caused by a loose impeller
• Supports proper draining by keeping the impeller engaged with the pump assembly

• Disconnect power and water before accessing the pump or impeller assembly
• Small part — keep track of screws and use appropriate tools to avoid stripping
• Inspect mating threads and the impeller for wear; replace damaged components as needed

This nozzle assembly directs water from the dispenser to the cup and replaces a cracked, clogged or damaged outlet. Restores clean dispensing and helps stop leaks or uneven flow from the dispenser area. What it does:

• Channels dispensed water through the refrigerator dispenser outlet for controlled flow
• Replaces broken, cracked, or worn nozzles that cause leaks or drips
• Helps clear flow issues caused by damaged or misaligned dispenser outlets
• Designed to mate with the dispenser housing and sealing features to prevent leaks

• One nozzle assembly as described

• Disconnect power and shut off the water supply before servicing
• Remove the dispenser trim/housing per your model's service instructions to access the nozzle
• Inspect and replace any damaged seals or gaskets during reassembly to ensure a watertight fit

This display power control board assembly replaces a failed control board for the fridge's user interface and power distribution to the display. Restores display illumination and button response when the original board is faulty. What it does

• Supplies power and control signals to the front display and touch/push buttons.
• Can cause a blank or dim display when the board fails.
• Resolves unresponsive control buttons, intermittent or garbled display readouts.
• Works with the main control system to manage front-panel functions.

• One display power control board assembly.

• Disconnect power to the appliance before beginning any work.
• Handle the board carefully to avoid static discharge and damaged connectors.
• Verify connector orientation and seating; do not force wiring harnesses.

This holder is a small mounting bracket that secures internal components in place, helping reduce movement and noise while keeping parts aligned for reliable operation. It's a direct-fit replacement when the original holder is broken or missing. What it does

• Secures and supports nearby components or assemblies to prevent shifting during operation
• Helps reduce vibration and rattling caused by loose parts
• Maintains proper alignment for connected parts to ensure consistent performance
• Commonly replaced when cracked, warped, or missing after impact or wear

• One holder

• Disconnect power (and water supply if appliance uses water) before servicing
• Inspect surrounding clips and screws; replace any that are damaged
• Typically installs with existing fasteners; keep orientation the same as the original