Ldt5545st Parts

Small sleeve bushing that supports pivoting or rotating joints in your dishwasher. Replace when worn, cracked, or causing excess friction between moving parts.

This guide assembly is the sliding rail that supports and aligns the freezer drawer. When worn or damaged, it can cause sticking, sagging, or poor sealing; replacing it restores smooth operation and proper drawer closure.

• Supports the freezer drawer and lets it glide smoothly in and out
• Keeps the drawer square and aligned with the front panel
• Helps the drawer close fully to maintain a proper seal
• Common symptoms: drawer hard to open/close, crooked or sagging drawer, grinding/squeaking, frost from incomplete closure, visible rail damage

• Disconnect power before servicing; empty the freezer drawer
• Pull the drawer out, remove the front panel and basket as needed
• Remove mounting screws and the old guide; reuse existing hardware if applicable
• Install the new guide, then verify both sides move evenly and the drawer seals properly

The WATER LEVEL SENSOR ASSEMBLY is an OEM component specifically designed for LG dishwashers. It is an electronic sensor responsible for monitoring and detecting the water level inside the dishwasher tub during each cycle. Precise water level detection allows the dishwasher to optimize water usage and ensure all cycles run as intended. 

Causes of a bad sensor assembly can include the buildup of sediment or minerals on the sensor contacts over time, leading to improper readings. Physical damage from impact could also affect sensor function.

Symptoms of a bad water level sensor assembly include:

• Incomplete or failed wash cycles 
• Error codes related to water issues
• Inability to fill or drain properly
• Flooding or leaks from the dishwasher 

Replace yours today with this genuine OEM LG part to maintain proper dishwasher operation. This OEM LG part is also compatible with Sears/Kenmore.

The Rack Assembly is an OEM part for LG dishwashers. It is the rack that holds dishes, glassware, utensils, and cookware during the wash cycle. 

Causes of a bad rack assembly can include normal wear and tear from years of use, such as bending or warping from heavy crockery loads. 

Symptoms of a bad dishwasher rack assembly include:

• Racks that no longer lay flat or slide smoothly 
• Difficulty loading large plates and pans
• Dishes falling over during the wash due to slanted racks
• Loose rocks that shift or don't remain secure inside the cavity

This OEM LG part is also compatible with Sears/Kenmore dishwashers. 

The Blower Motor Casing Assembly is an OEM part for LG dishwashers. This part houses the blower motor which generates airflow through the wash arms and drying vent. The casing is precision-engineered to fit securely within the dishwasher's structure.

Causes of a bad blower motor casing assembly can include cracked or warped plastic from repeated heating and cooling cycles. The seals around the motor connection points may also deteriorate over time.

Symptoms include:

• Incomplete or overly long drying cycle times
• Water pooling in the bottom of the dishwasher after cycles
• Sloshing or excess moisture noise heard coming from inside
• Irregular or strange smells emanating from within the unit

This LG part is also compatible with some Kenmore models.

The Micro Switch is an OEM part for LG dishwashers. It plays a crucial role in detecting when the door is securely closed prior to starting a cycle. This important safety feature prevents accidental exposure to hot water, detergent, and chemicals. 

Causes of a bad micro switch include degradation from years of repeated use, debris interfering with mechanisms, or damage from attempts to force or slam the dishwasher door closed.

Symptoms of a bad micro switch include:

• Cycles failing to start despite a closed door
• Hot water or steam visible escaping when running 
• The dishwasher not detecting the closed door position
• Error codes displayed related to door position sensors

This OEM LG part is also compatible with Sears/Kenmore. Replacing only when truly faulty helps ensure safe and reliable dishwasher function.
 

The Tine Row Holder is an OEM part for LG dishwashers. It is a molded plastic bracket located inside the dishwasher that firmly holds the horizontal tine rows of the upper spray arm assembly in place. Subject to vibrations during the wash cycle, the tine row holder must securely grip this assembly.

Symptoms of a bad tine row holder include:

• Loosened or detached upper spray arm that causes insufficient washing 
• Rattling noises from loose components inside the tub 
• Potential leaks if the plastic material cracks fully over time

Causes of failure can include cracking of the holder plastic from solvent exposure and mineral buildup over thousands of wash cycles. Replace with this OEM LG part to ensure balanced water distribution to all areas of dishes. It is also compatible with Sears/Kenmore dishwasher models.

This hose connector links two components in the appliance's water path to create a flexible, leak-resistant connection. Replacing a worn or cracked connector helps stop leaks and restore proper water flow and performance.

• Joins fittings or assemblies within the internal water system
• Maintains a watertight seal under normal operating pressure
• Helps resolve leaks, pooling, or related error codes/performance issues
• Common failure signs: visible cracks, swelling, brittleness, or a loose fit at the connection points

• Disconnect power and shut off the water supply before servicing
• Note hose routing and orientation; take a photo for reference
• Transfer and correctly position any clamps; tighten securely without over-tightening
• After installation, run a test and inspect all joints for leaks

Replace broken or missing tines in your dishwasher's dish rack. This component supports and secures dishes during wash cycles. Easy replacement part.

Fix spray arms not rotating or dishes not getting clean. This water distribution shaft assembly directs water to spray arms during wash cycles.

The Leg is an OEM part for LG dishwashers. It serves as a critical base component that elevates the dishwasher body above the floor for proper drainage. Legs are constructed with durable corrosion-resistant materials and adjustable height features to accommodate most flooring types. 

Symptoms of a bad leg can include:

• The dishwasher wobbles or is uneven during operation
• Standing water or improper draining of wash water  
• Visible damage like cracks, bending, or rust affecting stability

Causes of leg failure typically arise from normal wear over extended use of hard flooring. Replacing deteriorated legs restores the appliance's security and balance for optimum performance.

This affordable OEM LG part ensures the dishwasher stays firmly in place during cycles while conveniently adjusting to most installation situations. It provides customers with many more trouble-free years of use. This replacement leg is also compatible with KitchenAid models.

Check valve that prevents water backflow in the appliance's supply line, helping restore proper water flow to the ice maker or dispenser. Replaces a failed valve to address leaking, slow fills, or no-fill conditions. What it does:

• Stops reverse flow in the water line so water only moves toward the dispenser or ice maker
• Helps prevent water leaks and cross-contamination of the supply line
• Common symptom fixes: intermittent or no water to ice maker/dispenser, weak fills, or water pooling
• Fits inline with existing water tubing and works with the appliance's fill system

• Shut off water supply and unplug the appliance before replacing the valve
• Confirm tubing size and orientation before installation; install with correct flow direction
• Tighten fittings to prevent leaks but avoid overtightening plastic fittings

This door boot gasket seals the opening between the door and tub on front-load washers, keeping wash water contained. Replacing a worn boot restores a tight seal to prevent leaks and ensure proper door closure.

• Creates a watertight seal between the washer door and front tub
• Helps prevent leaks, drips, and moisture at the front of the machine
• Common signs of failure: visible tears/cracks, persistent mildew, clothes snagging, or the door not sealing flush
• Restores correct door sealing to maintain efficient wash performance

• Unplug the washer and turn off water supplies before servicing
• Remove the outer and inner spring/clamp rings; note orientation of the gasket and drain port
• Lightly soap the lip to ease installation and align the drain/weep holes at the 6 o'clock position
• Reinstall clamps securely and run a short cycle to check for leaks

This locker lock is the replacement latch mechanism that secures the appliance door during operation, restoring proper door closure and helping the unit run safely and reliably. Use when a door won't stay closed or the machine won't start. What it does:

• Replaces a worn or broken door latch to restore secure door closure
• Helps ensure the appliance detects a closed door and can start cycles
• Commonly used when the door is loose, won't latch, or causes door-sensor errors
• Fits into the door strike area and engages the cabinet catch for a firm hold

• Locker lock (single replacement latch)

• Disconnect power and water supply before servicing to avoid shock or injury
• Remove the outer door panel or access cover as needed to reach the latch area
• Verify alignment of the latch and striker when reinstalling to ensure proper engagement

Fix a dishwasher with non-responsive buttons, malfunctioning display, or won't start issues. This control panel assembly restores touchpad operation.

Fix a dishwasher that won't start, stops mid-cycle, or has no power with this main control board. Controls all wash cycles and functions.