Lfcs27596s/01 Parts

Replacement handle cap that covers and secures the end of a refrigerator or freezer door handle for a finished appearance and to protect exposed hardware. Restores a clean look and hides fasteners. What it does:

• Covers the exposed end of a door handle to conceal screws and mounting holes.
• Protects handle hardware from dirt and wear.
• Improves the appliance's appearance when an original cap is cracked, broken, or missing.
• Helps prevent snagging on a damaged or loose handle end.

• High-level snap-on or screw-on installation; handle removal may be required for access.
• Use basic hand tools as needed and avoid forcing parts to prevent damage.
• Confirm fit and finish before final installation.

This button holder secures a control panel push button in place so button presses register reliably and the panel stays finished. It restores proper button positioning and prevents the button from falling out or sticking. What it does:

• Holds a control panel push button in the correct position for reliable operation
• Keeps the button aligned so presses engage the switch or membrane consistently
• Prevents the button from popping out or becoming loose during normal use
• Helps maintain the appliance's finished appearance around the control area

• One button holder

• Turn power to the appliance off before attempting any service to avoid shock or injury
• Remove the control panel or bezel per the manufacturer's instructions to access the holder
• Inspect surrounding buttons and switches for wear; replace damaged components as needed

The Water Valve is an OEM part for LG refrigerators. This valve controls the flow of water to the refrigerator's ice maker and water dispenser, ensuring a steady and regulated supply.

Causes of a bad water valve can include wear and tear over time, mineral deposits from hard water clogging the valve, electrical issues, or physical damage from mishandling. These problems can result in the valve failing to open or close properly.

Symptoms of a bad water valve include:

• No water dispensing from the refrigerator
• The ice maker not producing ice
• Leaks around the valve area
• Unusual noises when the valve is operating
• Low water pressure or flow

This OEM LG part is also compatible with Sears/Kenmore models.

Restore a tight seal on your freezer by replacing a worn gasket. A fresh, pliable gasket keeps cold air in, limits frost and moisture around the door, and helps your freezer maintain stable, food-safe temperatures.

• Creates the air-tight seal between the freezer door and cabinet frame
• Helps maintain correct freezer temperature and energy efficiency
• Reduces frost/ice buildup and condensation near the door opening
• Symptoms include tears, warping, gaps, excessive frost, or the door not closing flush

• Disconnect power before servicing
• Warm the gasket in hot tap water or with low heat to improve flexibility
• Clean and dry the door channel; press the gasket fully into the retainer, starting at the corners
• Close the door and check the seal all around; adjust as needed and allow time for the gasket to conform

This adjustable leveling leg assembly supports and stabilizes your appliance by threading into the base frame. Replacing a worn or missing leg helps you level the unit for smoother, quieter operation on uneven floors.

• Provides height adjustment to level the appliance and distribute weight evenly
• Helps prevent rocking, wobbling, and excess vibration or rattling
• Can improve door alignment and smooth opening/closing when the cabinet is properly leveled
• Useful when a leg is missing, damaged, or threads are stripped

• Disconnect power; if applicable, shut off the water supply
• Use a helper to safely brace or tip the unit; protect flooring when accessing the leg
• Unthread the old leg and hand-thread the new one; tighten as needed
• Adjust front-to-back and side-to-side until stable; all legs bear weight evenly

This sensor PCB assembly detects and relays sensor signals to the appliance control system, restoring accurate sensor feedback and communication when the original sensor board fails or malfunctions. Designed as a direct replacement board. What it does:

• Reads sensor inputs and converts them to signals the main control board can interpret.
• Replaces a failed or intermittent sensor board that causes incorrect readings or sensor-related error codes.
• Can resolve symptoms such as unexpected sensor faults, control errors, or appliances not responding to sensor changes.
• Matches the OEM board function; verify model compatibility before ordering.

• Always disconnect power before servicing to avoid shock or shorting the board.
• Use ESD precautions and handle the PCB by its edges to prevent static damage.
• Ensure all connectors are fully seated and the board is mounted in the original orientation.

This TV cover assembly is the interior rear airflow cover in the refrigerator compartment. It encloses the ducting and helps distribute cold air evenly while protecting internal fan and components from damage.

• Directs chilled air from the evaporator throughout the fresh food compartment for consistent cooling
• Shields fan and duct components from impacts and debris
• Replace if cracked, warped, or missing tabs that cause rattling or airflow restriction
• Common symptoms include uneven temperatures, frost or ice on the back wall, and noise from fan contact

• Disconnect power and remove shelves/bins to access the rear interior panel
• Remove mounting screws and gently release locking tabs; watch for any attached harnesses or sensors
• Transfer any reusable components from the original cover as needed, then seat and secure the new cover evenly
• Restore power and confirm the fan spins freely with unobstructed airflow from vents

This factory rail guide assembly supports and aligns a sliding refrigerator drawer. Replacing a worn or damaged guide restores smooth, level drawer travel and helps prevent binding, scraping, or the drawer dropping on one side.

• Supports and guides the drawer as it opens and closes
• Helps keep the drawer level and properly aligned
• Restores smooth operation when the original rail is bent, cracked, or worn
• Typical symptoms include hard-to-open drawer, uneven movement, grinding/scraping, or visible rail damage

• Disconnect power and remove food from the affected drawer before starting
• Remove the drawer/basket from the slides; note hardware orientation and position
• Swap in the new rail guide assembly, transferring reusable hardware from the original as needed
• Reinstall the drawer and verify smooth, level travel; match left/right orientation to the original part