Lmhm22367bd Parts

Fix erratic display, flickering lights, or no power issues. This power control board restores regulated power and control functions to your microwave.

This is a truss-head tapping screw used to secure trim, panels, and small assemblies on compatible LG appliances. It provides a low-profile, wide-bearing head that helps hold parts flush and resist pull-through. What it does:

• Fastens plastic and sheet-metal components where a self-tapping thread is needed
• Truss head spreads load to prevent damage to soft or thin materials
• Helps secure control panels, brackets, or trim pieces that require a low-profile head
• Common replacement when original mounting screws are missing, stripped, or corroded

• One truss-head tapping screw

• Use the correct screwdriver bit and moderate torque to avoid stripping the screw or workpiece
• Start threading straight and let the screw form threads without forcing at an angle
• Disconnect power and follow appliance-specific service safety procedures before working internally
• Replace any damaged mating threads or clips for a secure fit

Interior light dim or uneven? This clear lens cover protects the bulb and restores even illumination. Simple snap-in installation in minutes.

Fix loud rattling or scraping noises from your microwave with a new cooling fan blade. Prevents overheating by circulating air around internal components.

Microwave won't power on? A blown fuse assembly is often the culprit. This part protects your microwave's circuit from overcurrent and short circuits.

This customized screw fastens specific panels, brackets, or internal components in LG appliances. Replacing a missing or stripped fastener restores a secure fit and helps reduce vibration, rattling, and premature wear. What it does:

• Secures mating parts such as panels, brackets, or mounts per the appliance design
• Restores proper fit when the original screw is lost, damaged, or stripped
• Helps reduce vibration and rattling from loose components
• Maintains alignment to support correct operation of the assembly

• Includes: One screw

• Disconnect power and, if applicable, shut off water and gas supplies before servicing
• Match length and thread to the original; start by hand to avoid cross-threading
• Use the correct driver size and tighten snugly without over-torquing
• Inspect and replace any damaged clips, inserts, or mating threads before reassembly

Complete mounting hardware kit for securing your microwave to cabinets or above the range. Includes all necessary brackets, screws, and fasteners.

This part mounts on the cooktop and supports the small "auxiliary" burner assembly. It channels gas from the orifice to the burner head so the simmer burner lights reliably and produces a steady, even flame.

• Secures and centers the auxiliary burner head/cap on the cooktop
• Directs gas flow from the orifice to the burner head for proper combustion
• Helps position the igniter adjacent to the burner head for reliable lighting
• Common symptoms include hard-to-light or non-igniting small burner, uneven/weak flame, or a burner head that won't sit level due to a damaged base

• Shut off gas supply and disconnect power; allow the surface to cool completely
• Remove grates, burner caps, and burner heads to access the base; remove mounting hardware
• Transfer existing components (such as the orifice holder and igniter) to the new base
• Reassemble, restore gas, and check all connections for leaks before use

Replacement door handle for microwave doors. Restores secure grip when original handle is cracked, loose, broken, or missing. Mounts to door exterior.

This auxiliary burner holder mounts on your gas cooktop or range and supports the smaller auxiliary/simmer burner. It properly positions the flame ports and igniter for reliable lighting and an even, stable flame.

• Supports and locates the auxiliary burner over the gas orifice
• Aligns with the igniter for quick, consistent ignition
• Helps maintain even flame distribution and low-heat control
• Common signs of failure: burner won't light or lights intermittently; uneven/yellow flames; burner cap won't sit level or wobbles

• Turn off gas supply and disconnect power; allow the appliance to cool completely.
• Remove grate, burner cap, and burner head from the affected position.
• Note the holder's orientation; detach the old holder and clean the mounting surface.
• Align the new holder with the gas orifice and igniter, secure with the original screws, reassemble, and test burner operation.

Fix a microwave door that won't close or latch properly. This door latch holder secures the latch assembly for reliable door alignment and operation.

Replaces cracked or broken protective housing cover that shields internal components from debris and moisture. Installs over control wiring area.

If your microwave's ventilation isn't circulating air properly, this circulation motor restores airflow. Direct-fit synchronous motor replacement.

This is a replacement screw used to secure appliance components and panels. It restores proper fastening where a stripped, missing, or damaged screw causes loose parts or rattling. What it does:

• Fastens panels, trim, or internal components to maintain structural fit
• Helps stop vibration-related noise from loose assemblies
• Replaces missing or corroded screws that prevent proper closures
• Restores secure mounting after repairs or disassembly

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug—do not over-torque to prevent thread damage
• Keep small parts away from children and pets
• Disconnect power or water before accessing internal parts

Fix unresponsive controls or erratic microwave operation with this sub controller assembly. Restores proper signal management for secondary functions.