Lsgl6335d Parts

This gas valve assembly controls gas flow to the oven and burners so the range heats properly and maintains safe operation. Replace a failed valve to restore ignition and regulated gas delivery. What it does:

• Regulates gas flow to the oven/burner when the appliance calls for heat
• Enables proper ignition and sustained burner/oven flame
• Common symptom: oven or burners won't heat or light even when controls are set
• Can cause clicking or continuous ignition attempts when valve sticks or fails

• Turn off gas supply and unplug the appliance before starting repairs
• Check all fittings for leaks after installation using a soap solution or approved leak detector
• Do not force connections; replace any damaged seals or tubing to ensure safe operation

This gas valve assembly controls the flow of natural gas to the oven/range burners so the appliance can heat correctly. Replaces a failed valve to restore regulated gas delivery and safe ignition control. What it does:

• Regulates gas flow to the oven/range burner(s) during ignition and operation
• Works with the igniter and safety sensors to allow reliable burner lighting
• Common symptom: oven or burner fails to heat or maintain temperature
• Common symptom: appliance won't ignite or cycles without producing heat

• Turn off gas supply and disconnect power before starting any service
• Inspect and replace any worn gaskets or seals; check fittings for proper torque
• After installation, test for proper operation and check all connections for leaks with a soap solution or approved leak detector

A replacement rotary selector switch that restores user control over cycle selection and settings. Replaces a worn or non-responsive control switch so the appliance accepts knob input and changes functions as expected. What it does:

• Serves as the user-facing control that rotates to select cycles, temperatures, or functions
• Restores electrical contact so the appliance registers knob positions and starts chosen cycles
• Commonly used when the knob spins freely, feels loose, or selected settings do not engage
• Matches the original switch's mounting and shaft orientation for a direct fit

• Disconnect power before starting any repair to avoid shock or damage
• Access may require removing the control panel—keep fasteners and small parts organized
• Handle with care to avoid bending the shaft or damaging terminals

This tapping screw secures appliance panels, brackets, and trim. Replace a missing or stripped fastener to restore a tight, rattle-free fit and keep components properly aligned.

• Cuts its own threads as it drives (self-tapping) to fasten metal or plastic components securely
• Helps eliminate looseness and vibration noises when an original screw is missing or damaged
• Typical signs you need this part: loose or rattling panels, gaps/misalignment, or covers that won't stay secured
• Direct replacement for the original fastener in the same location

• Disconnect power; turn off water or gas supplies before service
• Start the screw by hand to avoid cross-threading, then tighten with the correct driver
• Align parts fully before tightening and avoid overtightening, especially into plastic
• Reuse any original washers or clips that were installed with the screw

The Burner Cap is an OEM component specifically designed for LG gas ranges. This cap sits atop each burner element and functions to safely contain the burner flame during cooking. 

The burner cap regulates burner temperature and optimizes heat conduction. It distributes the flame evenly across the bottom of the cookware for rapid, consistent cooking results. 

Symptoms of a bad burner cap include: 

• Warping, cracks, or holes that allow flame to escape 
• Discoloration or material fatigue affecting flame quality
• Loose fit that impacts flame control or introduces safety issues

Causes may include normal wear over time exposed to heat, burns, or bending from heavy pots/pans.

Replacing this OEM LG burner cap will restore your range's heating performance, avoid potential safety hazards, and maintain proper cooking temperatures.

This customized screw secures appliance components where a standard fastener won't fit, helping keep panels, brackets and small assemblies stable. It's a direct-fit replacement when the original specialized screw is missing or damaged. What it does:

• Fastens and holds appliance panels, brackets or small parts in place
• Prevents rattling, loose trim or misaligned components caused by a missing or stripped screw
• Matches the OEM fit and thread pattern for proper engagement and alignment
• Used in locations that require a non-standard or customized fastener

• Disconnect power and water before servicing the appliance
• Use the correct screwdriver or driver bit to avoid stripping the head
• Tighten securely but do not overtighten; overtightening can strip threads or crack parts
• Keep removed hardware organized so you can reinstall in the original location

This halogen oven lamp provides interior lighting so you can check food without opening the door. It restores clear, bright illumination for safer, easier cooking and monitoring in compatible ovens. What it does:

• Replaces a burned or flickering oven interior lamp to restore normal lighting
• Lets you view cooking progress without opening the oven door
• Helps reduce the need for extra kitchen lights when checking food
• Fits into the oven lamp socket and functions as the appliance's interior light source

• One halogen oven lamp

• Disconnect power to the appliance before servicing to avoid shock
• Allow the oven to cool fully before replacing the lamp to avoid burns
• Handle the bulb by the base or use gloves/tissue to keep oils off the glass
• Make sure the bulb is seated securely in the lamp socket before restoring power

A replacement motor bracket that secures the motor to the appliance chassis for stable operation and reduced vibration. Restores proper motor alignment to help maintain smooth, quieter cycles and protect drivetrain components. What it does:

• Holds the motor firmly in place to prevent movement during operation
• Maintains correct motor-to-transmission/gear alignment for reliable power transfer
• Reduces vibration and rattling that can occur when mounts fail
• Helps prevent premature wear of motor and connected components
• Addresses symptoms such as excessive noise, shaking, or motor misalignment

• Disconnect power to the appliance before servicing; follow lockout/tagout best practices
• Turn off water supply and relieve any residual pressure for washer models before disassembly
• Basic mechanical skills and common hand tools required; bracket removal may require loosening motor fasteners and supports
• Reuse OEM fasteners if undamaged and torque to manufacturer specs; inspect surrounding mounts and hardware for wear

This is a replacement customized screw designed to secure appliance panels and components. It restores proper fit and fastening where the original screw is lost or worn, helping maintain safe, stable operation. What it does

• Replaces missing or damaged mounting screw used on appliance panels and internal components
• Restores secure fastening to reduce vibration and rattling during operation
• Matches the original OEM fit and thread form for correct engagement when verified for your model
• Helps prevent loose parts that can cause noise or interfere with moving components

• Disconnect power and water before servicing the appliance
• Verify screw size, thread direction, and length match the original before installation
• Use the correct screwdriver or bit to avoid stripping the head
• Tighten securely but avoid overtightening to prevent stripping or damaging mating threads

This truss head tapping screw secures interior panels and small components on compatible appliances, restoring proper fit and stopping rattles or loose trim. It's a direct hardware replacement for a single mounting point. What it does:

• Fastens panels, brackets, and trim where a low-profile truss head is required
• Replaces missing or stripped screws that cause rattling or loose parts
• Provides a secure hold by forming threads in sheet metal during installation
• Useful for repairing cosmetic or functional panel alignment issues

• Disconnect power before working on any appliance to avoid shock or injury
• Use the correct sized Phillips or Torx driver to prevent cam-out or screw damage
• Start straight and thread slowly; do not overtighten to avoid stripping sheet metal
• Replace only with the exact part number for best fit and performance

The Bracket Assembly is an OEM component specifically designed for LG electric ranges utilizing rear-mount control panels. This integral assembly securely attaches the command console within the unit cabinetry.

Causes of a bad bracket can include loosening or stripped screws no longer maintaining a tight interface, impacts warping the steel base compromising flush mounting, or corrosion where dissimilar metals contact deteriorating securing points.

Symptoms of a bad bracket assembly include: 

• Loose panel unable to be properly reinstalled  
• Scratches or abrasions from rattling components
• Drooping controls suffering misaligned activation zones  
• Detached splash guard failing to fully protect surfaces

Replace yours today with this genuine OEM LG assembly to restore a robust interface. Backed mounting flanges deliver long-term stability and compatibility when replacing Samsung, Frigidaire, or GE electric ranges requiring rear console mounting as well. 

This hinge assembly secures and guides a refrigerator/freezer door, restoring proper alignment and smooth opening/closing for a tight seal and reliable operation. Use when door sags, binds, or fails to close fully. What it does:

• Supports the door and keeps it aligned on its track for even sealing
• Allows smooth pivoting so the door opens and closes properly
• Reduces sagging or misalignment that can cause gaps or rubbing
• Helps stop door noise caused by worn or damaged hinge components

• Disconnect power to the appliance before servicing and work with the door supported to prevent injury or damage
• Handle the hinge and door carefully; use appropriate tools and get assistance if the door is heavy
• Confirm hinge orientation (left/right/top/bottom) and fastener types before installation
• Replace missing or worn mounting hardware or shims with OEM-specified parts for proper fit

This slider is a replacement glide piece that helps a drawer or sliding compartment move smoothly and stay aligned. Replacing a worn slider restores quiet, consistent travel and prevents wear on the surrounding trim. What it does:

• Guides and supports a drawer or sliding compartment for even movement
• Reduces sticking, scraping, and noisy operation from worn glides
• Keeps the drawer aligned to prevent rubbing or binding against the cabinet
• Helps extend life of associated rails and trim by restoring proper tracking

• One slider glide piece

• Disconnect power to the appliance and remove any contents before servicing
• Remove the drawer or access panel per your appliance instructions to reach the slider
• Inspect mating rail and fasteners; replace any damaged clips or screws for a secure fit

This AC synchronous motor assembly replaces the appliance's internal synchronous motor to restore smooth, reliable rotation of the designated component. It delivers direct-drive motion for components that require precise, consistent speed control. What it does:

• Spins the appliance's designated rotating component (for example a fan, blower or other driven mechanism) using a synchronous AC motor design
• Restores proper rotational motion when the original motor fails to start or maintain speed
• Helps eliminate symptoms such as no rotation, slow or intermittent movement, humming or stalled operation
• Operates at steady speed synchronized to the AC supply for consistent performance

• One motor assembly (AC synchronous), as shown

• Disconnect power before beginning any service to avoid electrical shock
• Handle the motor carefully; support the shaft and wiring during removal and installation
• Secure all fasteners and wire connections
• Test the appliance on a short cycle after installation to confirm correct operation

This replacement screw is a factory-style fastener used to secure components in place and restore proper fit and function. It's a direct-fit hardware piece sized and finished to match the original installation. What it does:

• Secures panels, brackets, or assemblies to prevent rattling or misalignment
• Restores original mounting strength where a stripped or missing screw causes loose parts
• Helps maintain proper panel gaps and component positioning for reliable operation
• Appropriate where the appliance requires the OEM-style screw head and thread form

• Screw

• Use the correct screwdriver or bit to avoid stripping the head
• Tighten until snug; avoid over-torquing which can strip threads or damage plastic parts
• Replace any damaged or corroded mating hardware for best results
• Disconnect power to the appliance and follow manufacturer safety instructions before servicing