Ngm8056uc Parts

The Knob Set is an OEM part for Bosch cooktops. This set includes four burner knobs designed to control the heat settings of your cooktop burners. The knobs allow you to easily identify and adjust the desired heat level for each burner.

A bad burner knob can occur due to accidental damage, wear and tear over time, or improper handling. Signs of a faulty knob include cracks, loose or wobbly fit, or difficulty in turning the knob smoothly.

Symptoms of a bad knob include:

• Cracks or visible damage 
• Loose or wobbly fit 
• Difficulty in turning the knob 

Replace your worn-out or damaged knobs with this genuine OEM Bosch part to restore your cooktop. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Cooktop Bracket Kit is an OEM part for Bosch cooktops. This bracket and hardware kit serves to securely fasten the cooktop surface to the underlying countertop.

Causes of a bad bracket can include wear and deformation from heavy cooktop use over time, or damage to fastening screws from accidental impacts.

Symptoms of a bad bracket and fastening kit include:

• The cooktop surface becoming loose, wobbly, or unstable during use
• Gaps appearing between the cooktop and countertop edges
• Reduced heat containment and risk of burns from loose surfaces

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This gas pressure regulator reduces and stabilizes the incoming supply to your appliance's manifold, helping ensure consistent burner and oven performance. Replacing a failing regulator can correct weak, fluttering, or uneven flames that affect multiple burners. What it does:

• Regulates inlet gas to a steady, appliance-safe manifold pressure
• Helps maintain consistent flame height and heat across burners and in the oven
• Can address symptoms like all burners running low, surging flames, or poor overall heating
• If only one burner is affected, the regulator is unlikely the cause; check that burner/valve first

• 1 gas pressure regulator

• Disconnect electrical power and shut off the gas supply before servicing
• Install with the flow arrow oriented toward the appliance; support piping and use approved thread sealant on threaded connections
• After installation, restore gas and check all joints for leaks using an approved leak-detection solution

This grate foot assembly installs on the underside of a gas cooktop or range grate to cushion and stabilize it. Replacing worn or missing feet helps protect the surface and keeps cookware level while you cook.

• Cushions contact between the grate and cooktop surface
• Helps keep the grate from sliding and reduces rattling
• Maintains proper grate height for stable, level cookware
• Common symptoms: wobbling/rocking grate, missing or hardened feet, scratches on the surface

• Allow the cooktop and grates to cool completely before servicing
• Remove the grate, pull off the old foot, and clean the mounting area
• Press the new foot firmly into place; if your model uses an adhesive or retainer, follow the manufacturer's cure time before using the burners
• For best results, replace all feet on a grate at the same time and it sits flat

The Burner is an OEM part for Bosch cooktops and ranges. This part provides reliable and consistent heat for cooking. This burner is specifically engineered to distribute flame evenly, ensuring optimal cooking performance. 

Causes of a bad Burner can include clogging from food spills or debris, which blocks gas flow and affects flame quality and consistency.  

Symptoms of a bad Burner include:

• Uneven flame or low flame output, which can lead to poorly cooked food
• Difficulty lighting the burner, indicating potential blockages or issues with the gas supply
• Excessive sooting or yellow flame, which suggests incomplete combustion typically caused by clogs or improper gas-air mixture
• Noticeable rust or physical damage that can prevent proper seating or alignment of the burner

This genuine OEM Bosch part is also compatible with Thermador, Gaggenau and select Kenmore models.

This valve is a water-flow control assembly that opens and closes to direct water where the appliance needs it. Replacing a worn valve restores proper water delivery and helps stop intermittent filling or leaks. What it does:

• Opens and closes to control water flow into the appliance
• Enables timed or sequence-based filling during cycles
• A faulty valve can cause no-fill, overfill, or continuous filling symptoms
• Prevents unintended water flow when functioning correctly

• One valve assembly

• Disconnect power and shut off the water supply before starting
• Handle electrical connections and seals carefully; replace any damaged gaskets
• Test for leaks and correct operation before returning the appliance to service

This replacement surface burner head restores even gas distribution and reliable ignition on your cooktop. Replacing a worn or clogged burner helps the flame light quickly, burn evenly, and bring back dependable everyday performance. What it does:

• Channels gas from the orifice through flame ports to create an even, stable flame
• Interfaces with the igniter electrode for consistent, quick lighting
• May resolve delayed ignition, clicking without lighting, weak or uneven flames, or flames that go out
• Replaces corroded, damaged, or persistently clogged burner components

• 1 surface burner head

• Shut off gas supply and power; allow the cooktop to cool completely
• Remove grate and burner cap, then lift off the old burner head
• Clean the orifice area and ensure flame ports are free of debris
• Align the new head with the orifice and igniter, seat fully, reinstall cap and grate, then test operation

The Holder is an OEM part for Bosch cooktops that provides a reliable and efficient ignition process for your cooktop burners. The burner igniter is responsible for generating the spark necessary to ignite the gas coming from the orifice holder. The orifice holder controls the flow of gas from the gas supply to the burner, while the tube connects the orifice holder to the burner head.

A bad holder can lead to issues with burner ignition, such as failure to light or inconsistent sparking. Possible causes of a bad assembly include worn-out igniter electrodes, clogged orifice holders, or damaged tubes.

Symptoms of a bad holder may include:

• Difficulty in igniting the burner
• Inconsistent sparking or weak spark
• Gas smell from the orifice holder 

Replace your faulty holder with this genuine OEM Bosch part to restore your cooktop burners. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

The Repair-Set is an OEM part for Bosch cooktops. This set includes precision-engineered nozzles that are crucial for the correct mixing of air and gas before combustion, which ensures efficient and even heating. The Venturi nozzles are key components in maintaining the performance and safety of gas cooktops, facilitating the proper flame size and consistency necessary for various cooking needs.

Causes of a bad burner Venturi nozzle can include clogging due to food spills or cleaning products, natural wear and tear, or improper initial installation.  

Symptoms of a malfunctioning Venturi nozzle include:

• Irregular flame size or color
• Weak or uneven heating
• Excessive soot or yellow flames indicating incomplete combustion

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This small replacement sealing ring restores a watertight connection in the appliance's fluid or valve fittings, helping prevent leaks and maintain proper operation. Replace worn or damaged rings to stop drips and avoid water-related damage. What it does:

• Forms a seal at pump, valve or hose connections to prevent water leakage.
• Commonly replaced when the ring becomes cracked, brittle, flattened or deformed.
• Symptoms that indicate replacement: visible leaks, pooling under the appliance, or intermittent water flow issues.
• Protects internal components by maintaining a reliable seal and preventing water intrusion.

• Disconnect power and shut off the water supply before starting any repair.
• Inspect mating surfaces and clean away debris or old sealant before installing the new ring.
• Fit the ring evenly without twisting; avoid overstretching or using metal tools that can nick the ring.
• If the original used lubricant, use only manufacturer-recommended lubricants; otherwise install dry.

This set of jets replaces worn or clogged dishwasher spray nozzles to restore proper water distribution and improve cleaning performance. Simple replacement of the nozzles helps maintain even spray coverage across racks. What it does

• Directs water from the spray arm through individual nozzles to reach dishes and remove food soil
• Replaces cracked, clogged, or damaged nozzles that cause poor cleaning or uneven spray patterns
• Helps reduce spotting and leftover residue by restoring designed spray flow
• Compatible with applicable Bosch dishwasher spray arm assemblies

• One set of jets as shown

• Disconnect power to the appliance before servicing; shut off water supply if required
• Remove the spray arm per your model's instructions to access the nozzles
• Use gentle pressure or the recommended tool to remove/install jets to avoid damaging the spray arm
• Run a short test cycle after installation to ensure proper spray operation and check for leaks

The Nut is an OEM component specifically designed for select Bosch gas cooktops. As a fastening mechanism, it firmly holds valves and brackets without loosening.  

Zinc plating resists corrosion ensuring dependable seating even under pot handles and continuous thermal expansion/contraction. Precision threading aligns without galling or binding that could jeopardize safe regulator positioning.

Causes requiring nut replacement commonly relate to wear through threads no longer maintaining clamping pressure on brass regulators over decades of use. Physical damage or over-tightening during assembly/service could also crack or distort housings.

Symptoms signaling the need for new nuts include:

• Gas leaks detected around valve connections or mounting points
• Loosened assemblies enabling unwanted vibrations from frequent cooking  
• Difficulty reaching proper tightening torques without hardware damage

This OEM Bosch replacement nut is also compatible with Thermador, Gaggenau, and some Kenmore ranges.
 

The Pressure Regulator is an OEM replacement part for Bosch gas cooktops. It maintains consistent burner flame levels for precise meal preparation, maximizing fuel efficiency. Even pressure safeguards safety through controlled gas flow.

Causes of a bad pressure regulator can include deteriorating diaphragm seals or valve shafts due to repetitive operations over the appliance's lifespan. Mineral scales from sediment in gas lines threaten integrity.

Symptoms of a bad pressure regulator include:

• Flames lift or flare away from burner heads unpredictably   
• Burners cannot maintain set heat levels, constantly cycling 
• Difficulty achieving desired flame height or cooktop shuts off
• Potential safety hazards like uncontrolled gas leakage

This OEM Bosch part is also compatible with Thermador, Gaggenau, and some Kenmore models.

This replacement holder is the mounting bracket used to secure a component inside the appliance, restoring proper alignment and support so parts stay in place during normal use. It helps reduce noise and wear caused by loose or misaligned components. What it does:

• Provides a secure mounting point for the associated component to prevent movement and vibration
• Restores proper spacing and alignment so connected parts operate smoothly
• Helps eliminate rattling or knocking caused by a missing or damaged bracket
• Durable replacement designed to match the OEM fit and function

• One holder as pictured

• Compare the part to the original before installation to ensure fit and orientation
• Turn off power and unplug the appliance before beginning any repair
• Use basic hand tools; avoid overtightening fasteners to prevent damage

This push-on retainer clip holds a 6mm shaft securely in place on compatible appliance components, restoring proper axial restraint and preventing parts from sliding off during operation. Simple, low-profile fastening for shaft retainment. What it does:

• Secures shafts and spindles with a 6mm outer diameter to prevent axial movement
• Keeps knobs, pulleys, or rotating components positioned correctly during use
• Commonly used where a quick, tool-free clip is required for retention
• Can resolve symptoms like loose or detached knobs, wobbling pulleys, or parts sliding along the shaft

• One push-on retainer clip sized for 6mm shaft mounting

• Push the clip onto the shaft groove until it snaps into place; ensure full engagement before operating
• Use snap-ring pliers or appropriate tools if removal is required to avoid damage
• Wear eye protection when installing or removing clips to guard against sudden release

This holder is a small mounting bracket designed to secure internal components in place inside the appliance, helping prevent movement and vibration for reliable operation. It's a direct-replacement component that restores proper fit and stability. What it does:

• Secures and supports designated internal parts to maintain correct alignment
• Reduces rattling or movement that can occur when fasteners or supports fail
• Keeps wiring, tubes, or assemblies positioned to prevent wear or interference
• Restores original mounting points to allow reassembly after repair

• One holder (mounting bracket) as shown

• Disconnect power (and water if applicable) before beginning any repair
• Inspect surrounding fasteners and clips; replace any that are damaged
• Use the OEM fasteners and align the holder to original mounting points