Pp175g42 Parts

Deck spindle assembly that houses the blade mounting shaft on riding mowers. Bolts to the mower deck. Replace if housing is cracked, worn, or damaged.

Axle spacer for riding mowers and lawn tractors. Maintains proper wheel alignment and spacing on the axle assembly. Replace if worn or missing.

Fix a riding mower that won't start or has no electrical power with this protective fuse. Simple 5-minute replacement prevents electrical damage.

This OEM part is a battery box for lawnmowers. The battery box is the protective plastic cover that goes over a lawnmower battery. Over time, a battery box can become cracked or damaged. If the battery box is no longer fully covering the battery or has deteriorated to the point where it is no longer performing its intended function, it will need to be replaced. Luckily, replacing a battery box is a simple process.To replace the battery box, start by making sure the mower ignition is in the off position. Once off, remove the positive and negative terminals using a bolt wrench. Once the connectors have been removed, lift the battery out of its position. Once it's been removed, remove the old battery box cover and set the battery inside the new box cover. Once fully covered, place the battery back in its place and resecure the positive and negative terminals.This genuine replacement part is sold individually and compatible with Husqvarna brand lawnmowers.

This is a bellcrank ground drive intended for use with riding mowers, tractors, and trimmers. The bellcrank ground drive employs the idler pulleys when the pedal brake control shaft assembly is pressed. A new bellcrank may be needed if the original was faulty, or if it becomes significantly worn through general operation of the machinery. However, installation of a new bellcrank is relatively simple. Only a few tools will be required when replacing this item, including: a socket set, a set of pliers and a hex wrench. The removal of the mower deck will also be required. The user should refer to their owner's manual for guidance regarding their specific model.This is an OEM part sourced directly from the manufacturer. It is sold individually. The bellcrank ground drive is designed for use in Husqvarna, Poulan, Weed Eater, and Jonsered models.

Steering plate connects to steering rods on riding mowers and lawn tractors. Replace if cracked, bent, or worn to restore proper steering linkage.

Steering bushing for lawn tractors and riding mowers. Mounts in the steering assembly to reduce friction and ensure smooth operation. Replace if worn or cracked.

This right hand lever assembly is a genuine Husqvarna part, sold individually. This right hand lever assembly can be used as a replacement part for a lawn mower or a lawn tractor. The purpose of the right hand lever is to manage the self-propel feature of the appliance so the appliance can be easily operated by the user.If the right hand lever is punctured, scraped, or eroded to the point that it cannot be engaged in order to use the self-propel feature, the component should be removed and replaced by this genuine OEM replacement part. Remember to always wear gloves when handling, repairing, and operating outdoor equipment. This is an OEM part sourced directly from the manufacturer. It is sold individually. This right hand lever assembly is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, and Poulan.

Torsion spring for lawn tractor brake system. Installs on brake assembly to provide tension. Replace if broken, stretched, or missing for proper brake operation.

Spacer retainer for lawn tractors and riding mowers. Maintains proper spacing between components. Replace if cracked, broken, or missing during maintenance.

This washer is used in the steering column of lawn mowers and lawn tractors. It is silver with smooth edges, and it fits bolt shoulders crafted by Husqvarna. Washers are flat pieces of steel used to prevent stripping of bolts and screws.This part is intended to be used in conjunction with a bolt shoulder and bracket deck suspension. Place the washer against the bracket deck suspension and screw the bolt shoulder through the hole in the washer. This keeps the washer in place and creates a buffer between the bolt and the bracket. Failure to use a washer will prevent the bolts from tightening appropriately and negatively impact load suspension. These washers are expertly crafted. Still, washers may need to be replaced due to rusting or corrosion. These issues, combined with regular wear and tear, can cause the washers to fail or break over time.This washer is compatible with numerous mower models and personal use tractors, including Husqvarna, Poulan, Ariens, and Craftsman. This piece fits any model produced by Husqvarna that requires part #532199162. Sold individually. This part is guaranteed, genuine Husqvarna. This is an OEM replacement part sourced directly from the manufacturer.

Engine pulley guides drive belt rotation in riding mowers. Replace if worn, cracked, or causing belt slippage. Confirm fit with your model number.

This key, chain, and blister pack features two keys along with a keychain with important safety tips. Keys are needed to start and operate lawn tractors and riding mowers. As with keys for other vehicles, it goes into the ignition and turns to get the engine started. Without a key, it is impossible to get the machine started to mow the lawn. Of course, keys can become lost and damaged over time. If the key is lost or does not work, owners need to get new keys that will fit their machine. Although these are generic keys, it does not mean that they will work with all makes and models of riding mower. Buyers need to be certain they are checking the makes and models that will work with these keys. These keys are genuine OEM parts. The pack includes two keys and a keychain. Having two keys ensures a spare is available in case one is lost. These keys are compatible with a range of brands including Husqvarna, Poulan, Weed Eater, Jonsered, Craftsman, and Dixon. Buyers should always double-check not just the brand, but their model to ensure the keys will work properly.

Stabilizes idler arm placement for proper belt tension on lawn tractors. Replace if bracket is bent, cracked, or causing belt misalignment. Verify fit.

This screw is a genuine Husqvarna part, sold individually. This screw can be used as a replacement part in a lawn mower or a snowblower. The purpose of the screw in a lawn mower or a snowblower is to serve as a fastening component.The screw in a lawn mower or a snowblower might need to be replaced if the screw is chipped away, eroded, dented, punctured, or scraped at some point within the typical lifespan of the appliance. The screw can also be lost or misplaced during the operation of the appliance, in which case the screw should be replaced by this genuine OEM replacement part.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This screw is compatible with the following outdoor appliance brands: Husqvarna, Craftsman, Weed Eater, Poulan, Murray, Ariens, and Dixon.

Fastening screw for lawn tractors and riding mowers. Secures internal components in place. Replace if stripped, missing, or corroded during repairs.