Prg366wh Parts

Fix overheating or loud fan noise in your gas range with this cooling fan motor. Protects electronics by circulating air to cool internal components.

This LP main jet regulates propane flow to a surface burner to maintain a clean, stable flame. Replace a clogged or incorrect jet to restore proper burner performance, especially when converting a cooktop or range from natural gas to LP.

• Meters LP gas to the burner head for correct flame size and combustion
• Direct replacement for a damaged, clogged, or incorrect jet during service or LP conversion
• May help with yellow/sooty flames, weak or overly high flames, uneven heating, or delayed ignition

• Shut off gas and power; allow the appliance to cool completely
• Remove grates, caps, and burner head to access the orifice holder
• Start the jet by hand, then tighten gently with the correct tool—do not overtighten
• After installation or any LP conversion, leak-test connections and verify a steady blue flame; other jets and the regulator may also require LP settings per the model's instructions

Stabilizing leveling foot for gas ranges. Provides balance and proper elevation. Replace if worn, broken, or missing to restore stability and positioning.

Fix an oven light that won't turn on or a self-clean cycle that won't start. This door switch monitors door position for safety and lighting.

Oven or burner won't adjust temperature correctly? This range potentiometer restores variable control. DIY-friendly repair, takes about 20 minutes.

This Jet is the small spray nozzle that directs a focused stream of water inside the dishwasher's wash system. Replacing a clogged or damaged jet helps restore proper spray coverage, wash pressure, and overall cleaning performance.

• Directs and meters water flow within the wash system
• Helps maintain spray arm/wash zone pressure and coverage
• Replace if clogged with mineral deposits or physically damaged
• Symptoms include poor cleaning, weak spray, unusual wash noise, or leaks near the nozzle

• Disconnect power and shut off the water supply before servicing
• Access the nozzle location and note its orientation and any seals/clips
• Clean mating surfaces; transfer any reusable seal/clip if present
• Seat and lock the jet fully; run a test cycle and check for leaks

Protective cap that covers openings or fasteners on your gas range. Replace when cracked, broken, or missing to restore a clean, finished appearance.

This is a replacement appliance tube that routes water or air inside compatible Bosch appliances to maintain proper operation and prevent leaks. Durable plastic construction restores the original pathway for fluids or airflow. What it does:

• Replaces a worn, cracked, or damaged internal tube to stop leaks or seepage
• Restores proper routing of water or air so the appliance can operate as designed
• Helps eliminate symptoms like visible leaking, pooling, or unusual odors from trapped moisture
• Works as a direct-fit replacement where the original tube has failed or deteriorated

• One replacement tube

• Disconnect power and turn off the water supply before beginning any repairs
• Compare the new tube to the original for length, fittings, and orientation before installing
• Use proper clamps or retainers as required by the appliance; secure connections to prevent leaks

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

The Repair Set is an OEM part designed specifically for Bosch range ovens that includes the necessary parts to repair your oven door hinges. It is responsible for maintaining the proper alignment and stability of the door, allowing for the smooth opening and closing of your oven door.

A bad oven door hinge can occur due to wear and tear, accidental damage, or improper handling. Signs of faulty hinges include a loose or wobbly oven door, difficulty in opening or closing, or the door not staying securely in place during operation.

Symptoms of bad oven door hinges include:

• A loose door that does not close properly
• Difficulty in opening or closing the door smoothly
• The door not staying securely in place when in use

Replace your worn-out or damaged oven door hinges with this genuine OEM Bosch part to restore your oven door. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Replacement oven rack for gas ranges. Heavy-duty metal construction with powder-coated finish. Needed when original rack is warped, damaged, or missing.

Control knob for gas ranges. Mounts on the control panel to adjust burner temperature and oven settings. Replace if cracked, broken, or missing.

Oven light not working or flickering? This low-voltage transformer powers your range's interior lights. Restores proper oven lighting function.

Tube component for gas ranges. Installs in the burner assembly or manifold area. Replace if cracked, damaged, or leaking to restore proper operation.

Fix blank screens, unresponsive controls, or error codes with this display control interface. Restores visible feedback and menu settings for your cooktop.

If your gas range burners won't light or ignite intermittently, a worn ignition cable may be preventing spark delivery. Restores reliable ignition.