Prgpropane Parts

If one burner won't spark but others work, the igniter switch may have failed. This part sends the spark signal to ignite gas burners reliably.

Fix an oven light that won't turn on or a self-clean cycle that won't start. This door switch monitors door position for safety and lighting.

Internal support bracket that secures and aligns components inside your gas range. Replace if cracked, broken, or missing to restore stability and fit.

Oven or burner won't adjust temperature correctly? This range potentiometer restores variable control. DIY-friendly repair, takes about 20 minutes.

This Jet is the small spray nozzle that directs a focused stream of water inside the dishwasher's wash system. Replacing a clogged or damaged jet helps restore proper spray coverage, wash pressure, and overall cleaning performance.

• Directs and meters water flow within the wash system
• Helps maintain spray arm/wash zone pressure and coverage
• Replace if clogged with mineral deposits or physically damaged
• Symptoms include poor cleaning, weak spray, unusual wash noise, or leaks near the nozzle

• Disconnect power and shut off the water supply before servicing
• Access the nozzle location and note its orientation and any seals/clips
• Clean mating surfaces; transfer any reusable seal/clip if present
• Seat and lock the jet fully; run a test cycle and check for leaks

This glass shelf replaces a damaged or missing refrigerator shelf to restore usable storage space and keep items level and organized. Easy to clean and slides into existing shelf supports for a simple refresh. What it does:

• Provides a flat, stable surface for food containers and stored items.
• Replaces cracked, chipped or missing shelves that cause items to tip or fall.
• Allows quick cleaning and spill containment compared with wire shelving.
• Fits into existing shelf brackets or supports to restore original configuration.

• Remove food and items from the area before removing the old shelf.
• Support the shelf when removing or installing to avoid dropping or chipping the glass.
• Slide into existing shelf supports; do not force—check supports for damage first.
• Handle with care and dispose of broken glass safely; wear gloves and eye protection if shelf is damaged.

Protective cap that covers openings or fasteners on your gas range. Replace when cracked, broken, or missing to restore a clean, finished appearance.

This is a replacement appliance tube that routes water or air inside compatible Bosch appliances to maintain proper operation and prevent leaks. Durable plastic construction restores the original pathway for fluids or airflow. What it does:

• Replaces a worn, cracked, or damaged internal tube to stop leaks or seepage
• Restores proper routing of water or air so the appliance can operate as designed
• Helps eliminate symptoms like visible leaking, pooling, or unusual odors from trapped moisture
• Works as a direct-fit replacement where the original tube has failed or deteriorated

• One replacement tube

• Disconnect power and turn off the water supply before beginning any repairs
• Compare the new tube to the original for length, fittings, and orientation before installing
• Use proper clamps or retainers as required by the appliance; secure connections to prevent leaks

Replacement water inlet valve that controls an appliance's incoming water flow for reliable fill and cycle operation. Replacing a faulty valve can stop no-fill, slow-fill, or continuous-fill issues and restore normal performance. What it does:

• Opens and closes to regulate water entering the appliance during fill cycles.
• Helps ensure correct water levels for proper washing or rinsing.
• Common symptom fixer for appliances that won't fill, fill slowly, or keep filling.
• May cause visible leaks at the valve or trigger fill-related fault behavior if failed.

• Turn off power and shut off the water supply before starting any work.
• Open a cycle or relieve pressure to drain residual water before removing the old valve.
• Inspect and replace any worn seals or inlet hoses when installing the new valve.
• Follow the appliance service manual for specific removal/installation steps.

The Repair Set is an OEM part designed specifically for Bosch range ovens that includes the necessary parts to repair your oven door hinges. It is responsible for maintaining the proper alignment and stability of the door, allowing for the smooth opening and closing of your oven door.

A bad oven door hinge can occur due to wear and tear, accidental damage, or improper handling. Signs of faulty hinges include a loose or wobbly oven door, difficulty in opening or closing, or the door not staying securely in place during operation.

Symptoms of bad oven door hinges include:

• A loose door that does not close properly
• Difficulty in opening or closing the door smoothly
• The door not staying securely in place when in use

Replace your worn-out or damaged oven door hinges with this genuine OEM Bosch part to restore your oven door. This Bosch part can also be used on Thermador and Gaggenau appliances.
 

Replacement oven rack for gas ranges. Heavy-duty metal construction with powder-coated finish. Needed when original rack is warped, damaged, or missing.

Secures 5/16-inch gas tubing to compression fittings. Replace if leaking, loose, or damaged during service. Verify tubing size before ordering.

This compression sleeve forms the sealing ring for a 5/16-inch tubing compression joint, restoring a watertight connection when used with a matching compression nut and fitting. Ideal for stopping leaks and restoring reliable water lines. What it does:

• Creates the compression seal on 5/16" tubing when installed with a compatible compression nut and fitting.
• Stops leaks or drips at compression-style water connections.
• Used on appliance water lines (ice makers, water inlets) and other 5/16" tubing joints.
• Replaces worn or damaged sleeves that fail to hold a tight seal.

• Shut off the water supply and relieve pressure before working on water lines.
• Inspect and cut tubing squarely; slide the sleeve onto the tube before threading the compression nut and fitting.
• Tighten the compression nut per the fitting manufacturer's instructions and check the joint for leaks.
• Replace the sleeve if damaged or deformed.

Fix a burner that won't ignite with this gas range burner tube. Connects each burner to the gas valve. Can seize over time from high heat exposure.

Control knob for gas ranges. Mounts on the control panel to adjust burner temperature and oven settings. Replace if cracked, broken, or missing.

Support, hinge counter restores proper hinge support and door balance for a worn or damaged hinge assembly. This replacement helps the appliance door open and close smoothly and stay aligned for reliable everyday use. What it does:

• Provides structural support to the door hinge and helps counterbalance the door
• Stabilizes hinge movement to reduce sagging, binding, or uneven closing
• Helps the door latch and seal correctly by keeping the hinge alignment consistent
• Use when you notice door droop, difficulty latching, or irregular door motion

• Installation may require partial disassembly of the door or hinge assembly—refer to the OEM instructions for your model
• Disconnect power and turn off water supply before beginning any repair
• Inspect surrounding hinge components and fasteners; replace any damaged parts and test door operation after installation