Psc25ngsa Parts

This silicon controlled rectifier (SCR) is a replacement control semiconductor that helps regulate power to heating elements and motors, restoring proper cycle control and heat delivery in compatible appliances. What it does:

• Controls and chops AC power to heating elements or motor circuits for variable heat/speed control
• Can stop intermittent or no-heat conditions caused by a failed SCR in oven, range, or similar appliances
• Helps restore stable thermostat/regulation behavior when the original SCR is not switching correctly
• Commonly used where precise power control is required in the appliance's control board or module

• One silicon controlled rectifier (SCR) as shown

• High-level, service-only replacement — disconnect power before starting work
• Verify correct part number on the appliance and transfer heat sinks or mounting hardware if required
• Use proper ESD precautions when handling semiconductor components

This mullion duct gasket seals the vertical door/mullion area to help keep cold air inside the refrigerator and reduce condensation. It replaces a worn or damaged gasket to improve seal performance and reduce moisture buildup. What it does:

• Seals the mullion/duct area between doors to help maintain proper temperature and reduce warm air infiltration
• Helps prevent condensation and frost build-up along the door mullion
• Restores the door seal where gaps or deterioration allow air leaks
• Works with original mullion/duct trim to maintain proper airflow paths

• 1 mullion duct gasket

• Designed to fit into the mullion/duct channel; remove old gasket and press new gasket into place
• Handle gently to avoid stretching or tearing the gasket during installation
• Clean the mounting channel before installing to ensure a full contact seal
• Disconnect power or follow appliance safety guidelines before servicing doors/mullion area

This side gasket seals the chill compartment, helping maintain proper temperature and reduce frost and moisture buildup for consistent food storage. It replaces worn or torn side seals to restore the compartment's closing surface. What it does:

• Replaces damaged or hardened side seal material to improve the compartment's seal.
• Helps reduce air leaks that can cause temperature fluctuations or excess frost.
• Supports efficient cooling by maintaining a tighter seal around the chill area.
• Can resolve symptoms like cold loss in the chill compartment, visible gaps, or condensation/frost near the seal.

• High-level swap: remove the old seal, clean the mounting surface, and press the new seal into the channel until fully seated.
• Use mild soap and water to clean surfaces; avoid harsh solvents that can damage plastic.
• If adhesive or fasteners are present, retain or replace them per the model's instructions.
• Disconnect power only if required by your model's service instructions; follow all safety guidance.

This adjustable freezer shelf provides a stable, reconfigurable surface to organize frozen foods and maximize storage. It replaces a damaged or missing shelf to restore proper spacing and holding capacity in the freezer compartment. What it does:

• Supports frozen food containers, boxes and bags while keeping items elevated and organized
• Allows height adjustment to accommodate taller or bulkier items
• Replaces cracked, warped or missing freezer shelving that can no longer hold items securely
• Helps prevent items from sliding or shifting when the door is opened

• One adjustable freezer shelf

• Remove all items from the shelf area before installation
• Slide shelf into the existing support channels or brackets until it seats securely
• No special tools typically required; handle glass or coated surfaces carefully to avoid damage

This is a mobility screw used to secure mobility-related components in compatible appliances, providing a reliable fastener for stable operation and correct alignment. It replaces worn or missing screws to restore secure mounting. What it does

• Fastens and secures mobility/bracket components to prevent movement or misalignment.
• Helps maintain proper alignment of moving parts that can cause noise or binding when loose.
• Commonly replaced when mounting points are stripped, damaged, or missing.
• Small replacement part that supports overall appliance stability and safe operation.

• One screw as shown/packaged by the manufacturer.

• Use the correct screwdriver or bit to avoid stripping the screw head.
• Ensure the appliance is powered off and disconnected from the power source before accessing internal components.
• Do not overtighten; snug to manufacturer torque or until the part is secure.
• If mounting hardware or threaded inserts are damaged, replace or repair those components before installing this screw.

This upper freezer tower bracket secures the ice/tower assembly inside the freezer, keeping the tower aligned so ice fills and dispenses correctly. It restores proper support to reduce movement and rattling. What it does:

• Holds the upper section of the freezer/ice tower in position to maintain alignment
• Prevents tower movement that can cause noise or interfere with ice delivery
• Helps keep internal components stable so ice fills and dispenses normally
• Supports proper fit of surrounding trim and panels

• Disconnect power to the refrigerator before beginning any work
• Remove ice bin and any nearby trim for safe access to the tower area
• Use appropriate tools and retain original fasteners; replace damaged fasteners if needed
• Inspect surrounding components for damage and test ice operation after installation

This 8-18 x 7/8 inch stainless steel screw secures appliance panels, brackets and components for a safe, stable fit. Its machine thread and corrosion-resistant finish make it suitable for interior and mildly exposed locations. What it does:

• Fastens panels, brackets or trim where an 8-18 x 7/8" screw is specified
• Restores secure mounting for loose or rattling parts
• Resists corrosion to help maintain fit over time
• Provides the correct thread size to prevent stripping when installed properly

• One 8-18 x 7/8 in stainless steel screw

• Use the correct driver and engage threads straight to avoid cross-threading
• Tighten until snug; avoid over-torquing which can strip threads or damage parts
• Replace only with identical size and thread type to ensure proper fit
• Disconnect power and follow appliance safety guidelines before working on the unit

This boot auger motor powers the auger inside the ice dispenser boot to move ice from the bin into the dispenser chute. Replacing a worn motor restores normal ice dispensing and stops auger-related jams or no-dispense issues. What it does:

• Rotates the ice auger inside the dispenser boot to feed ice toward the chute.
• Restores ice dispensing when the auger does not turn or dispenses intermittently.
• Stops symptoms such as humming from the dispenser area, no ice output, or auger binding.
• Works with the dispenser drive components to deliver measured ice portions.

• Disconnect power to the appliance before beginning work to avoid shock or injury.
• Remove the ice bucket/door panels as required to access the dispenser boot and auger assembly.
• Handle electrical connections and mounting hardware carefully; match wire connectors and routing during reassembly.
• After install, restore power and test the dispenser through several cycles to ensure proper auger rotation and operation.

This replacement chill pan collects defrost and condensation water and channels it away so your refrigerator interior stays dry and free of pooled water. Designed to restore normal drainage and reduce leaks. What it does:

• Collects defrost and condensation water from the evaporator area
• Directs water to the evaporator/condenser area to evaporate safely
• Helps prevent water pooling inside the fresh-food or freezer compartment
• Can reduce musty odors caused by standing water and trapped debris

• Disconnect power to the appliance before beginning any service
• Empty the compartment and remove any components blocking access
• Inspect and clean the drain tube and mounting points when replacing the pan
• Use OEM instructions for fitment and reassembly