Pvd28bynbfs Parts

This upper freezer basket roller replaces a worn or broken wheel that lets the freezer basket slide smoothly. Restores proper basket support and helps stop sticking, scraping, or noisy movement inside the freezer. What it does:

• Replaces the plastic wheel that supports and guides the upper freezer basket along its track
• Restores smooth in-and-out motion and corrects baskets that catch or bind
• Stops rattling or grinding caused by cracked, worn, or missing rollers
• Helps maintain proper basket alignment and load support

• One white upper freezer basket roller

• Disconnect power to the appliance before beginning any service
• Remove the freezer basket to access the roller; store removed items safely
• Most rollers snap or slide into a housing—inspect clips and track for damage and replace both if needed

This stainless-steel drip tray catches spills and condensation under your appliance, protecting the cabinet and floor while keeping the area tidy. Durable metal construction resists corrosion and wipes clean for simple maintenance. What it does

• Collects water, drips and overflow from the appliance to prevent damage to surrounding cabinetry and flooring
• Direct-fit replacement designed to restore proper drainage and containment
• Stainless finish resists stains and is easy to clean with a damp cloth
• Helps reduce odors and mildew by containing spills until cleaned

• Designed as a direct-replacement; no modification expected
• Power off and disconnect the appliance if required to access the tray area
• Handle with care to avoid sharp edges; use gloves if needed
• Clean mounting area before installing the new tray to ensure proper seating

The Power Supply Board is an OEM part for GE refrigerators. This printed circuit board receives power from the appliance’s cord and safely distributes appropriate low-voltage current to control modules, sensors, displays, and other components requiring electricity to function properly.

Causes of a bad power supply board can include short circuits, corrosion of internal traces over time, or failures of individual electronic components like capacitors or transistors. 

Symptoms of a bad power supply board include:

• Refrigerator fails to power on at all
• Lights, displays, or modules intermittently lose power
• Abnormal electrical smells or burning odors present  
• Tripping of the refrigerator’s internal fuse

This GE OEM replacement ensures a consistent, regulated flow of power throughout the appliance. With high reliability even in demanding cool temperatures, it is also suitable for retrofitting certain Hotpoint, RCA, or Kenmore-branded models depending on circuitry compatibility. 
 

This electronic dispenser control board operates the refrigerator's autofill and dispenser functions, restoring reliable water delivery and dispenser response. Designed as a direct replacement for the dispenser control assembly. What it does:

• Controls autofill and dispenser valve operations for timed water delivery
• Sends/receives signals to the dispenser interface and water valve to start/stop filling
• Helps resolve no-water, intermittent dispense, or dispenser control unresponsiveness
• Works with the dispenser user interface and related sensors to coordinate fills

• One autofill dispenser control board

• Disconnect power (and water if applicable) before removing panels or wiring
• Handle the board by edges and avoid static discharge; ground yourself before touching connectors
• Secure boards and panels per factory location
• Test dispenser functions after reassembly and restore power/water supply

This swivel bin base is the rotating support for a refrigerator crisper/deli drawer, restoring smooth pivoting and stable drawer movement for easier access and proper storage alignment. What it does:

• Provides the rotating support under a refrigerator bin so the drawer pivots smoothly
• Replaces a worn or cracked base that causes sticking, wobbling, or uneven rotation
• Helps restore proper drawer alignment and prevents the bin from catching or tilting
• Works with the drawer assembly to maintain easy open/close operation

• Disconnect power to the appliance or unplug the refrigerator before starting work
• Empty the drawer and remove any shelves or stops as needed to access the base
• Align the base with the drawer hub and press or snap into place per the drawer design
• Remove any debris or fragments before installing the new part; use care to avoid damaging the drawer or surrounding trim

This is a replacement round-head screw sized 10-24 x 5/8 in. It secures trim, panels, and internal components so parts stay aligned and appliances run quietly and safely. What it does

• Fastens panels, brackets, and trim pieces in place
• Prevents loose parts that can rattle or cause misalignment
• Replaces missing or stripped screws to restore secure mounting
• Works where a 10-24 x 5/8 round-head screw is required

• Disconnect power before servicing the appliance
• Use the proper screwdriver or nut driver to avoid stripping the head
• Align parts before tightening and thread gently to avoid cross-threading
• Do not over-tighten; stop when snug to prevent panel distortion

This magnet catch secures the refrigerator outer door to the inner door frame so the door stays closed and the seal engages. It helps maintain proper cooling and prevents warm air from entering the compartment. What it does:

• Holds the outer door closed by providing a magnetic latch point on the in-door assembly
• Helps maintain an effective door seal to protect interior temperature and food freshness
• Commonly replaces a worn or weak catch when the door no longer stays closed
• Can stop symptoms like doors that pop open, poor cooling near the door, or interior lights that stay on

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Requires basic hand tools; remove door trim or inner panel only as needed to access the catch
• Align and secure the catch so the door closes squarely and the magnet engages consistently
• Test door operation and seal after installation; do not force parts—replace any damaged surrounding trim or fasteners

A left-hand closure door assembly that replaces a worn or broken door closure to restore proper sealing and smooth drawer/door operation. Helps stop drafts and keeps compartments closing correctly for reliable performance. What it does

• Guides and supports the left-side door/drawer as it closes to ensure proper alignment.
• Helps form a tight seal to reduce air leakage and maintain interior temperature.
• Prevents rattling or catching that can occur when the closure is damaged or worn.
• Commonly replaced when the door doesn't stay closed, binds, or leaves a visible gap.

• Disconnect power to the appliance before starting any repair.
• Basic hand tools are typically required; access may involve removing a drawer or trim panel.
• Handle parts carefully to avoid damaging surrounding panels or gaskets.

This stainless refrigerator door handle replaces a damaged or worn pull to restore a secure grip and clean appearance. It provides a direct, OEM-style replacement for refrigerators with a matching handle mount. What it does:

• Replaces a cracked, bent, or heavily scratched door handle
• Restores safe, easy door opening and closing when the original handle fails
• Matches stainless finishes for a consistent look on the refrigerator exterior
• Uses the factory mounting points for a direct-fit replacement

• Use the factory screws and hardware; if original fasteners are missing, obtain the correct hardware before starting
• Tighten mounting screws securely but avoid over-torquing to prevent handle or door damage
• Disconnect power to the appliance if removing nearby trim or panels that expose electrical components

The Ice Bucket and Crusher is an OEM replacement part for GE refrigerators responsible for storing and dispensing ice cubes. The bucket securely holds the ice, while the crusher mechanism allows you to dispense crushed ice. 

A bad ice bucket and crusher can occur due to damage or wear and tear over time. If you notice symptoms such as cracks, broken parts, or difficulty in dispensing or crushing ice, it may indicate a need to replace the ice bucket and crusher.

Symptoms of a bad ice bucket and crusher include:

• Cracks or broken parts
• Difficulty in dispensing or crushing ice
• Inoperable or jammed crusher mechanism

Restore your refrigerator's ice storage and crushing capabilities by replacing the faulty ice bucket and crusher with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

This defrost heater melts frost and ice from the evaporator coil so the refrigerator can cool properly. It restores normal airflow and helps prevent excessive frost buildup that can block cooling. What it does:

• Heats the evaporator coil during the defrost cycle to remove ice and frost.
• Helps restore proper airflow and cooling when frost buildup restricts performance.
• Common fix for heavy frost on the evaporator, long run times, or reduced cooling.
• Works with the refrigerator's defrost control and thermostat to operate only during defrost.

• One evaporator defrost heater assembly.

• Disconnect power to the appliance before attempting any service.
• Access is typically behind the freezer evaporator cover; handle the evaporator fins and wiring carefully.
• Verify defrost heater continuity with a multimeter before replacing; replace if open or damaged.

The Convertible Thermistor is an OEM replacement part for GE refrigerators. It helps regulate and monitor the internal temperature of the refrigerator, ensuring cooling. The thermistor senses the temperature inside the refrigerator and sends signals to the control board to adjust the cooling settings accordingly. It helps maintain consistent temperatures and preserving the freshness of your food.

A bad convertible thermistor can occur due to various factors, including electrical malfunctions, damage to the thermistor, or improper calibration. If you notice symptoms such as inconsistent cooling, temperature fluctuations, or the refrigerator not reaching the desired temperature, it may indicate a need to replace the thermistor.

Symptoms of a bad convertible thermistor include:

• Inconsistent cooling
• Temperature fluctuations
• Refrigerator not reaching desired temperature

Restore your refrigerator by replacing the faulty convertible thermistor with this genuine OEM part.

This GE part can also be used on Hotpoint, RCA, and Kenmore/Sears appliances. 
 

A left upper refrigerator door hinge that secures the freezer/refrigerator door to the cabinet and allows smooth opening and closing. Replaces a worn or damaged hinge to restore proper door alignment and seal. What it does:

• Supports the upper left door and bears its weight to keep the door aligned
• Guides door movement for smooth opening and closing
• Helps maintain an even door seal to prevent cold air loss and condensation issues
• Commonly replaced when the door hangs, drags, squeaks, or won't stay level

• One left upper refrigerator door hinge

• Requires basic hand tools; disconnect power to the appliance before starting
• Keep door supported during removal/installation to prevent injury or damage
• Tighten mounting fasteners securely and check door alignment after installation

This upper freezer basket with an integrated divider restores organized storage in the freezer compartment. The white molded basket keeps frozen items contained and the divider helps separate foods for easier access and stacking. What it does:

• Provides a dedicated upper-bin storage area to keep frozen foods organized
• Built-in divider separates items to prevent shifting and improve visibility
• Replaces cracked, broken or missing upper freezer baskets that allow items to fall through
• Molded plastic construction resists moisture and is easy to clean

• Remove food from the freezer area and power down the appliance
• Lift out the old basket, align the replacement basket in the upper compartment, and seat it into the same supports or rails
• Do not force the basket; ensure proper alignment to avoid damaging mounting features
• Clean with mild detergent; avoid abrasive cleaners or high-heat cleaning methods

This evaporator assembly circulates refrigerant to remove heat from the freezer compartment, restoring normal cooling and frost control. It is the evaporator coil packaged with attached foam insulation blocks for proper fit and thermal sealing. What it does

• Evaporates refrigerant to absorb heat from the freezer compartment for normal cooling.
• Promotes even freezing and helps prevent excessive frost build-up when functioning correctly.
• Can be replaced when the evaporator is corroded, damaged, or leaking and causing poor cooling.
• Works with the evaporator fan and defrost system to maintain freezer temperature and airflow.

• One evaporator assembly with attached foam blocks as shown.

• Disconnect power to the appliance before beginning any repair.
• Replacement may require handling refrigerant lines.
• Avoid bending or crushing the coil fins and foam blocks during installation to preserve performance and sealing.
• Verify defrost components (heater, bi-metal/thermostat, and control) and fan operation when replacing the evaporator.

This evaporator fan bracket secures the refrigerator's evaporator fan motor and blade assembly to the evaporator housing, keeping the fan properly positioned for reliable airflow and consistent cooling throughout the freezer and fresh-food compartments. What it does:

• Holds the evaporator fan motor and blade in the correct position to maintain steady airflow across the evaporator coil.
• Helps prevent fan wobble or contact with other components that can cause noise or premature wear.
• Supports proper defrost airflow to reduce frost buildup and improve temperature consistency.
• Can resolve symptoms such as a noisy or misaligned evaporator fan, reduced airflow, or uneven cooling when the bracket is damaged or broken.

• One evaporator fan bracket (mount)

• Disconnect power to the appliance before beginning any repair.
• Remove interior panels and the evaporator cover to access the fan assembly; handle the evaporator coil carefully to avoid damage.
• Verify fan motor and blade alignment on the bracket before reassembling; replace any damaged fasteners.