She6af06uc Parts

This spring-style hose clamp secures flexible appliance hoses to fittings, helping prevent leaks and loose connections. It's a small but critical fastener that keeps water and drain hoses sealed under normal operation. What it does:

• Holds a rubber or plastic hose firmly onto a barb or spigot to stop leaks
• Prevents hose slippage that can cause water pooling or drip symptoms
• Maintains a compressive seal that resists vibration and thermal cycling
• Commonly used on drain, fill, and circulation hoses in dishwashers and washers

• Disconnect power and shut off water supply before starting work
• Use appropriate pliers (hose clamp or needle-nose) to expand and position the clamp
• Ensure the clamp sits evenly over the hose barb and releases fully to secure the hose
• Inspect the hose and connection for damage; replace hoses if they are cracked or excessively worn

This push control button replaces a broken or missing control panel button so you can restore reliable button presses and function selection. It fits onto the appliance control board assembly to provide a tactile user interface. What it does:

• Provides a tactile push surface for selecting cycles, options, or settings
• Replaces cracked, worn, stuck, or missing buttons that fail to register presses
• Interfaces with the control switch or membrane to send user commands
• Restores proper button travel and feel for accurate operation

• One replacement push control button

• Disconnect power to the appliance before servicing to avoid shock or damage
• Access may require removal of the control panel or console; keep fasteners organized
• Gently seat the button onto its post or switch; avoid forcing or overtightening
• Test button function after reassembly; inspect the switch or control board if electrical issues persist.

This replacement seal forms a tight barrier to help prevent leaks and maintain normal appliance operation. It restores the sealed connection between mating components so the appliance can contain water or air as designed. What it does:

• Creates a watertight/airtight seal between mating parts to help prevent leaks
• Helps stop water pooling, dripping, or unexpected moisture near the appliance
• Restores proper fit where worn or damaged seals allow loss of pressure or fluid
• Supports stable operation by maintaining the intended interface between components

• Disconnect power and water supply before starting any repair
• Remove the old seal and clean mating surfaces of debris and residue before installing the new seal
• Align the seal carefully and seat fully to avoid pinching or gaps

This push-style button restores user control on the appliance's front panel, providing a tactile surface to operate a specific function. Durable replacement for worn, cracked, or stuck buttons so controls respond reliably. What it does:

• Provides a tactile contact point to activate a specific control or cycle on the front panel
• Replaces buttons that are cracked, faded, loose, or no longer springing back
• Helps restore reliable button actuation and improved user feedback
• Compatible with the original button mounting and engagement mechanism

• One replacement push button

• High-level replacement: typically snaps or screws into the control panel—power off the appliance before servicing
• Handle control panel removal gently to avoid damaging adjacent buttons or the user interface
• If the button attaches to a selector or switch, confirm proper alignment before reassembly

This facia panel is the exterior trim piece that covers and protects the appliance control area, restoring appearance and keeping buttons and displays secure. It replaces a damaged, cracked, or worn control panel face for a like-new look. What it does:

• Covers and protects the control buttons, display window and electronics from dirt and damage
• Restores a clean, finished appearance to the appliance front
• Helps prevent moisture and debris from reaching internal controls
• Commonly needed when the control area is cracked, scratched, or cosmetically worn

• One facia panel

• High-level replacement: usually unclips or screws into place from the front or after removing the console—follow model-specific instructions
• Power safety: disconnect power before removing the old facia to avoid shock or damage to controls
• Handle with care to avoid scratching the new panel during installation
• Document wiring and fastener locations for proper reassembly

Fine filter designed to trap food and debris in the dishwasher's wash system, helping prevent pump clogs and reduce redeposited soils on dishes. Direct replacement for the dishwasher's original fine-mesh filter. What it does:

• Captures food particles and fines from wash water to keep the pump and circulation system clear.
• Helps reduce food redeposit and maintain wash performance when functioning properly.
• Can prevent coarse debris from reaching the wash pump and drain components.
• Common signs a filter needs cleaning or replacement include visible food on dishes, recurring clogs, or poor wash results.

• Always disconnect power to the appliance and turn off the water supply before servicing.
• Remove the lower dish rack to access the filter area; handle the filter gently to avoid damage.
• Clean the filter seat and surrounding area before installing; ensure the filter is seated and secured per the owner's manual.

This replacement door handle restores a secure, comfortable grip for opening and closing the appliance door and refreshes the unit's appearance. Designed to match OEM fit and finish for a clean, factory look. What it does:

• Provides a sturdy grip for opening and closing the appliance door.
• Replaces cracked, loose, or broken handles that make the door hard to operate.
• Helps maintain proper door alignment and user control when opening or closing.
• Restores the appliance's finished appearance where the original handle is damaged.

• Disconnect power to the appliance before beginning any repair and follow all safety precautions.
• Installation may require removing the door trim or access panel and common hand tools (screwdriver, socket); your appliance manual for exact steps.
• Retain original fasteners; this part listing does not guarantee included hardware.

This insulating part cushions and thermally isolates internal components to help reduce heat transfer and vibration noise in the appliance. It's a small replacement piece that restores proper spacing and protection around sensitive parts. What it does:

• Provides thermal separation between hot components and surrounding cabinet parts to help prevent heat damage
• Cushions components to reduce vibration and rattling noises during operation
• Helps maintain correct part clearances for safe, reliable performance
• Used where original insulation was damaged, missing, or deteriorated

• Disconnect power and, if applicable, water before beginning any repair
• Handle carefully; avoid compressing or tearing the insulation during installation
• Verify correct orientation and secure fit against the intended component or cabinet surface

This support is a replacement mounting bracket that stabilizes and secures appliance components for reliable operation and correct alignment. It restores proper part positioning to reduce rattling and wear. What it does:

• Provides structural support and secure mounting for the specified appliance component
• Helps eliminate movement, vibration, or noise caused by a loose or damaged bracket
• Restores correct alignment so related parts engage and operate smoothly
• Prevents further wear by holding components in the intended position

• One support (mounting bracket) as shown

• Designed for direct replacement; inspect the surrounding area and mating fasteners before installing
• Use appropriate tools and retain original screws or clips unless replacements are required
• Disconnect power and follow all safety precautions for your appliance before servicing